Metric Closest Inch
——– —————–
M8-1.25 5/16-18 (Smaller)
M10-1.5 3/8-16 (Smaller)
M12-1.75 1/2-13 (Larger)
M14-2.0 9/16-12 (Larger)
Thereof, Which is bigger m5 or m6 bolts?
Metric Closest Inch
——– —————
M3.5-0.6 6-40 (Same)
M4-0.7 8-36 (Larger)
M5-0.8 10-32 (Smaller)
M6-1.0 1/4-28 (Larger)
Also to know is, What are the sizes of metric bolts? Size Clearance Hole mm Tapping Drill (std Pitch)
—- —————– ————————-
M5 5.5 4.2 mm
M6 6.5 5.0 mm
M8 9 6.75 mm
M10 11 8.5 mm
Subsequently, question is, What are standard metric bolt sizes? Metric Closest Inch
——– —————–
M8-1.25 5/16-18 (Smaller)
M10-1.5 3/8-16 (Smaller)
M12-1.75 1/2-13 (Larger)
M14-2.0 9/16-12 (Larger)
Also, What does 8.8 on a bolt mean?
8.8- This type of grade is often referred to as the structural grade for bolts. … When a bolt has a grading of S, it means that it can withstand a stress of 45 to 49.9 metric tonnes per 6.45 cm². This grading, which is typically stamped on the head of the bolt, has the same tensile strength as a grade 8.8 bolt.
What’s the difference between standard and metric bolts?
For standard bolts, head size is measured in inches or fractions of inches; however, metric bolt head sizes are measured in millimeters, which can cause confusion if engineers attempt to apply metric bolts to standard systems, and vice versa.
How do you tell the difference between a metric and standard bolt?
Metric fasteners are measured by length and pitch, or the distance between threads. So the systems are opposite in a way: The higher the TPI in a standard bolt, the finer the threads because there’s more squeezed into a set space. The greater the pitch on metric fasteners, the more distance between threads.
Are car bolts standard or metric?
The entire car industry is metric right now, and has been for a LONG time.
What are the most common bolt sizes?
If you can go imperial, 1/4-20 is going to be the most common fastener. M4 – M5 – M8 – M10 – M12 – (M14) – M16. Those are the most commonly used in my opinion. M6 is not rare, nor is M3, but M7 and M9 is rare.
What size is an m5 bolt?
Tap size Basic major dia (mm) Basic major dia (inch)
——— ——————– ———————-
M4 x 0.7 4mm .1575
M5 x 0.8 5mm .1969
M6 x 1 6mm .2362
M8 x 1.25 8mm .3150
Is a 12.9 Bolt stronger than Grade 8?
Grade/Class Strength
—————– ———————————————————-
Metric Class 8.8 Similar to Grade 5.
Metric Class 10.9 Similar to Grade 8.
Metric Class 12.9 The highest metric class for strength, it exceeds Grade 8.
What are the sizes of bolts?
Does Honda use metric or standard?
Registered. All fasteners on almost all modern cars are metric. Yours are all metric, Honda has always been metric.
What does the on a bolt mean?
Sometimes there are lines on the bolt head. … The lines on the head of a bolt indicate its grade. SAE J429 (Society of Automotive Engineers) bolts have radial lines, whereas ASTM (American Society for Testing and Materials) uses a combination of letters and numbers to indicate the grade.
What is m6 thread size?
6mm
What does the mean on a bolt head?
The lines on the head of a bolt indicate its grade. SAE J429 (Society of Automotive Engineers) bolts have radial lines, whereas ASTM (American Society for Testing and Materials) uses a combination of letters and numbers to indicate the grade.
Is m6 bigger than m5?
Metric Closest Inch
——– —————
M3.5-0.6 6-40 (Same)
M4-0.7 8-36 (Larger)
M5-0.8 10-32 (Smaller)
M6-1.0 1/4-28 (Larger)
Don’t forget to share this post 💖
References and Further Readings :
