Remove the latch plate screws and the latch plate from the doorjamb. Place the latch plate in a vice. File the edge of the latch plate opening to widen it by 1/8 inch with a half-round file. Replace the latch plate and test the door to see if it will shut.
Thereof, How do you fix a door that won’t close properly?
Also to know is, How do you fix a screen door handle? – Remove the old broken door handle. Remove the old storm-door handle by unscrewing the two screws that hold the two halves together.
– Mark new hole locations. …
– Drill holes for new handle. …
– Assemble the door handle. …
– Attach the strike plate.
Subsequently, question is, How do you fix a stripped door latch?
Also, Why is my screen door not locking?
When your screen door won’t latch properly and pops back open or does not close all the way, the latch plate is in the wrong position on the doorjamb. This may be caused by the latch plates shifting over time, due to thermal expansion; or because the latch plate was installed misaligned with the door latch.
How do you tighten a screen door handle?
Use an Allen key to loosen the set screw on the side and remove the door handle. Use a flat head screwdriver to carefully remove the cover plate, which will expose the two Phillips screws. Take a Phillips screwdriver to tighten the screw on each side, this will secure the handle.
How do you fix a loose screen door handle?
Use an Allen key to loosen the set screw on the side and remove the door handle. Use a flat head screwdriver to carefully remove the cover plate, which will expose the two Phillips screws. Take a Phillips screwdriver to tighten the screw on each side, this will secure the handle.
How do you replace a storm door latch?
How do you fix a loose door handle with screws?
How do you replace a screen door handle?
Can you replace screen door handle?
Trade in the broken, shabby push-button handle on your screen door for a shiny new easy-opening lever handle. … This project is basically as simple as how to replace a door handle. You can swap out the handle in about 10 minutes. Typically, two mounting screws hold the old handle together.
How much does it cost to replace an exterior door handle?
The national average materials cost to install a door knob is $41.45 per knob, with a range between $32.24 to $50.66. The total price for labor and materials per knob is $122.72, coming in between $70.91 to $174.53. Your actual price will depend on your location, job size, conditions and finish options you choose.
How do you fix a broken screen door handle?
– Remove the old broken door handle. Remove the old storm-door handle by unscrewing the two screws that hold the two halves together.
– Mark new hole locations. …
– Drill holes for new handle. …
– Assemble the door handle. …
– Attach the strike plate.
How can I make my door latch tighter?
Why is door handle loose?
Reasons doorknobs or handles can become loose It is an older mechanism and has been subjected to a build-up of dirt, dust and other pollutants that may affect the operation of the handle or lock. There might be a missing screw or a screw loose in the door plate.
How do you tighten a Larson storm door handle?
There is a flat head screw on the top of the closer. Turn it to the right until it is tight. Then turn it left one full turn.
How much does it cost to fix a broken door handle?
Often, replacing an interior door handle is a simple DIY job. If you lack the tools, time, or desire to work on your own car, you’d be better served taking it to a reputable mechanic. The average shop price should be between $50 and $200 to replace an interior handle.
Don’t forget to share this post 
References and Further Readings :
