– Turn the dial to the “Auto” position and press the “Manual” key to test the valves on Easy Dial and Easy Set Orbit timers.
– Turn the dial to the “Auto” position and move the slide switch for the desired valve up to the “Manual On” position to test valves on Orbit’s “Individual Station Slide” timers.
Thereof, How do I adjust my orbit sprinkler system?
To adjust spray distance, turn the screw in the center of the nozzle with a flat-head screwdriver. Turn it clockwise to decrease spray distance and counterclockwise to increase it.
Also to know is, How do you set the orbit hose timer?
Subsequently, question is, How do I turn on my old sprinkler system? Slowly open the main shutoff valve to let water into the sprinkler system. For a ball valve, turn the lever handle one-quarter turn until the handle is parallel to the pipe; this is the fully open position. For an in-ground shutoff valve, use a sprinkler valve key to turn the valve counterclockwise until it stops.
Also, How do I start my sprinkler system after winter?
Slowly open the main shutoff valve to let water into the sprinkler system. For a ball valve, turn the lever handle one-quarter turn until the handle is parallel to the pipe; this is the fully open position. For an in-ground shutoff valve, use a sprinkler valve key to turn the valve counterclockwise until it stops.
How do you manually turn on a Hunter sprinkler system?
– Turn dial to MANUAL – ONE STATION position.
– Station run time will flash in the display. …
– Turn the dial clockwise to the RUN position to run the station (only the designated station will water, then the controller will return to automatic mode with no change to the previously set program).
How do you rotate a sprinkler system?
Turn off the water, lift the gear-driven pop-up sprinkler out of the ground and rotate the head clockwise as far as it will go. Turn the adjustment screw on the sprinkler head counterclockwise as far as it will go with a flat-head screwdriver.
How do you set a dual timer orbit?
How do I turn on my sprinkler system?
How do I Dewinterize my sprinkler system?
How do you manually run an orbit sprinkler system?
How do I manually turn on a Hunter node?
How do I manually turn on my sprinkler system?
How do I set the timer on my orbit 2 station?
How do you set a timer on orbit?
How do you test a hunter sprinkler system?
– Press and hold the PRG button. The station number will be flashing.
– Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes. …
– After a 2 second pause, the test program will begin.
How do I manually start my hunter sprinkler system?
– Hold down the arrow (>) button for 2 seconds. When you will see station 1 appear on screen, release the arrow (>) button.
– This feature automatically defaults to program A. …
– The station number will be flashing. …
– Press the arrow (>) button scroll to the station you wish to begin with.
Don’t forget to share this post 
References and Further Readings :
