The most common place to find the model number is on the label of the box you purchased the faucet in.
Thereof, How do I find out what brand my faucet is?
The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it. The logo might be large and obvious, or it might be small and unobtrusive. If you can’t see an obvious one, try cleaning it first. If it is slightly dirty, the logo might be hidden.
Also to know is, How do I identify my Moen kitchen faucet cartridge? The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.
Subsequently, question is, Do faucets come with cartridges? Each faucet handle (hot and cold) has its own cartridge, a valve that turns with the handle to control the flow of water into the faucet spout. If you have a very old two-handle faucet, it may be a compression-type rather than a cartridge.
Also, How do I identify my faucet cartridge?
Do faucets come with valves?
Every type of bathroom sink faucet has an inner valve that controls the flow of water through the spout.
How do I find my Moen faucet model number?
The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.
What is the valve on a faucet?
All plumbing fixtures use valves. Valves, or mechanisms that take the place of valves, maintain a water-tight seal inside your bathroom faucet and regulate the flow and temperature of water.
Do faucets come with supply lines?
Many new faucets include supply lines, but they may not be long enough, or they may not have the right threads to connect to your shutoff valves. To determine the length of the supply lines you’ll need, measure from the underside of the sink near where the faucet connects to the shutoff valve and add a few inches.
How does a faucet valve work?
Compression faucets have two separate handles. When the handle is turned, it raises or lowers a washer or seal that closes against a valve seat at the base of the stem to restrict water flow through the faucet body when you turn the handle off.
Do Moen faucets come with supply lines?
This particular model includes pre-attached flexible water supply lines with 3/8-inch compression (screw-on) fittings. If your shutoff valves under the sink are 1/2-inch instead of 3/8-inch, connect the supply lines with 3/8-to-1/2-inch compression adapters.
How does a faucet cartridge valve work?
The Concept Behind Cartridge Faucets One handle controls the hot water and one controls the cold, and the valves have screw threads that tighten a washer down onto the water inlet to stop the water.
Do kitchen faucets have cartridges?
Cartridge faucets generally use an up/down motion to regulate water flow and control temperature with a left/right motion. If you have a two-handle faucet with handles that turn 90 degrees, you have either a cartridge or compression faucet.
How do I know what brand my bathtub faucet is?
Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a “K,” the faucet is a Kohler unit; an “M” signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet itself.
What is the difference between a valve & a faucet?
When used as nouns, faucet means an exposed plumbing fitting, whereas valve means a device that controls the flow of a gas or fluid through a pipe. An exposed plumbing fitting; a tap or spigot; a regulator for controlling the flow of a liquid from a reservoir. …
What is the purpose of a cartridge in a faucet?
Inside the housing, the cartridge, which is connected to the handle, blocks water from both inlets when the faucet is off, but it has strategically placed holes that allow both hot and cold water to flow when you turn it on.
Do all kitchen faucets have cartridges?
Cartridge faucets come in both single-lever and two-handle versions, and various models use different types of plastic or brass-body cartridges. … The type of water control valve your faucet uses is not always readily apparent just by looking at the faucet. For example, a single-handle kitchen faucet could use a.
Don’t forget to share this post 
References and Further Readings :
