Average Costs for Refinishing Hardwood Floors Per-square-foot costs may be less if you’re having a contractor come in to refinish an entire house, while costs can be more if they are refinishing just a single room. Cost for finishing stairs averages about $40 to $75 per stair tread.
Thereof, How much does it cost to sand and refinish stairs?
The price for refinishing stairs is $4.50 to $8 per square foot for materials and a contractor. Stair replacement costs depend on the number of steps and surface area. Total project cost to refinish a 10 step staircase is $90 to $160, including material and labor time.
Also to know is, How do you sand and refinish stairs? – Sand. Start by sanding down the treads to bare wood with the 80 grit sandpaper. …
– Clean. Vacuum between passes, then wipe down the treads with a tack cloth. …
– Sand again. …
– Clean again. …
– Treat the wood. …
– Stain the treads. …
– Apply the Finish. …
– Sand, then repeat two more times.
Subsequently, question is, Is it cheaper to refinish hardwood floors or replace with laminate? The truth is, it is almost always cheaper to refinish your floor than to replace it. When replacing, you must consider the cost of the new wood as well as the installation, plus the cost to haul your old wood floors away.
Also, Is refinishing hardwood floors worth it?
Is It Worth It To Refinish Your Hardwood Floors? Yes, it’s worth refinishing hardwood floors instead of replacing them. Refinishing is cost-effective, it’s quicker, and it’s a lot easier because it requires less labor.
How often should you refinish your hardwood floors?
every seven to ten years
How much does it cost to refurbish a staircase?
The price for refinishing stairs is $4.50 to $8 per square foot for materials and a contractor. Stair replacement costs depend on the number of steps and surface area. Total project cost to refinish a 10 step staircase is $90 to $160, including material and labor time.
Can you Restain wood without sanding?
Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood. There’s no stripping or heavy sanding necessary to remove the old finish!
How do you refinish oak stairs?
How much does it cost to redo a staircase?
A complete makeover for a standard staircase falls on the mid or high end of that price range. New treads and risers usually cost about $1,800 to $2,500. New balusters usually cost about $1,200 to $1,600. A complete makeover including treads, risers, balusters, a handrail and newel posts usually costs $4,000 to $8,000.
How do you finish oak stairs?
The simplest way to finish oak stair treads is with two coats of clear polyurethane, which enhances both the grain and the natural reddish to goldish tinge of the wood. Bring out further warmth by coating the treads with wood stain before applying poly finish.
How much will it cost to refinish my hardwood floors?
Nationally, the average cost for refinishing a hardwood floor is $1,684, within a typical range of $1,074 to $2,400. But there’s every chance your floor is anything but average, and your actual costs can vary depending on many factors, especially the availability and cost of labor in your area.
How much does it cost to refinish 1000 square feet of hardwood floors?
This will typically cost $1 per square foot, or $225. For a custom refinish job involving sanding the hardwood flooring, and applying stains, water-based or oil-based finishes, and other finishes like those that are acid-cured, expect to pay $3.75 to $5 per square foot, or $850 to $1,125.
How much does it cost to refinish $1000 square feet of hardwood floors?
Flooring square footage Average cost
———————– ————
100 – 250 sq. ft. $600
251 – 500 sq. ft. $750
501 – 750 sq. ft. $1,601
751 – 1000 sq. ft. $2,100
How much should I pay to have my wood floors refinished?
Nationally, the average cost for refinishing a hardwood floor is $1,684, within a typical range of $1,074 to $2,400. But there’s every chance your floor is anything but average, and your actual costs can vary depending on many factors, especially the availability and cost of labor in your area.
How much does it cost to have a floor professionally sanded?
This will typically cost $1 per square foot, or $225. For a custom refinish job involving sanding the hardwood flooring, and applying stains, water-based or oil-based finishes, and other finishes like those that are acid-cured, expect to pay $3.75 to $5 per square foot, or $850 to $1,125.
Should I refinish my floors myself?
“You can walk across the floor the next day, but we recommend that people leave it alone for a week,” Williams said. “It may look dry, feel dry and smell dry, but it’s not dry.” … Williams said he would never consider refinishing the floors himself.
Don’t forget to share this post 
References and Further Readings :
