A: Yes, you can remove the brick facade and replace it with another material. And you will still be able to use the fireplace. The only restriction is that the material around the firebox must be noncombustible. Common choices are marble, some other type of stone or tile.
Chimney and Fireplace Removal Costs A partial fireplace or chimney demolition costs $500 to $2,500 to remove everything below or above the roof-line. Instead of a full demolition, a fireplace and chimney breast can be removed below the roof-line, while leaving the stack and blocking off the chimney flue.
Thereof, How much does it cost to take down a chimney?
The cost to remove a chimney averages between $2,000 and $4,000 for a full removal; however, chimney removal costs vary from one chimney to the next for a number of reasons.
Also to know is, Is it a good idea to remove a chimney? WARNING: While it is possible to remove a chimney yourself, it isn’t a good idea unless you have home improvement experience, you’re comfortable performing manual labor up on your roof, and you have a helper nearby to assist you and maintain safety as much as possible from the ground.
Subsequently, question is, Does removing a fireplace decrease home value? But losing a fireplace can affect a home’s appeal and possibly even its resale value, real estate pros say. A fireplace can particularly be viewed as a valuable amenity in colder climates, and removing one could even reduce the number of buyers drawn to a property, some agents say.
Also, How do you remove bricks from a chimney?
How do you remove a brick face from a fireplace?
Place the cold chisel in the mortar joints of one of the end bricks. There should be a joint where the brick meets the wall and there is a joint between the top brick and the second course below it. Work on both joints until the brick is loosened, then lift it off.
How does a fireplace affect home value?
Can a fireplace help a home sell? Having a fireplace won’t hurt your ability to sell your home. People still like fireplaces, but few want to pay extra for them. Don’t expect a fireplace to raise your home’s value, but don’t go through the expense and hassle of getting rid of it, either.
How difficult is it to remove a chimney?
You should keep in mind at all times that chimney removal is a lengthy, difficult process which can potentially lead to serious structural concerns. It is best to have several people working on the project at once, and having experts on-hand may significantly reduce the risk of complications.
Can you remove chimney?
External chimney stack removal can be done from outside the building and, if done carefully, need not disrupt any internal decoration. Removing an internal chimney breast, however, is a mess job. … On the ground floor, the stack should be taken down to ground level.
How much does it cost to remove a chimney?
Fireplace and chimney removal costs $3,000 to $6,000 for an entire demolition with structural support and home repairs. A partial removal costs $500 to $2,500 for a wood-burning stove, gas fireplace insert, chimney stack, or breast. A large brick or stone chimney can cost $4,000 to $10,000 to remove.
Can you remove brick from fireplace?
A: Yes, you can remove the brick facade and replace it with another material. And you will still be able to use the fireplace. The only restriction is that the material around the firebox must be noncombustible. Common choices are marble, some other type of stone or tile.
Can a brick fireplace be removed?
Q: I’d like to remove my fireplace brick, but it goes all the way up from the hearth to the ceiling. … A: Yes, you can remove the brick facade and replace it with another material. And you will still be able to use the fireplace. The only restriction is that the material around the firebox must be noncombustible.
How important is a fireplace for resale?
A homeowner can often recover over 100 percent of the expenses associated with adding a fireplace upon selling their home. According to the National Association of Real Estate Appraisers, adding a fireplace to home can increase the resale value of the home by as much as 6-12 percent.
How do you remove brick without breaking it?
Do roofers remove chimneys?
Fortunately, Fusion Roofing professionals have the skills and experience to remove chimney stacks, install new decking, and replace shingles that match those on the rest of the roof, thus providing homeowners a safe alternative to attempting the potentially dangerous task on their own while also creating an …
Is it worth removing chimney breast?
Simply removing the stack may not create a lot of debris, but if your plans involve taking out the chimney breast in one or more areas, you may be looking at a large amount of brick and tile. … In the latter case, disposal may be cheap or even free, depending on the company and state of the bricks you remove.
How do you break a brick fireplace?
Start at the top of the wall and insert the tip of an air chisel into the mortar joint between the top row of bricks and the second row of bricks. Chisel between the bricks just enough to break the bond and pop the top brick loose. Alternatively, use a hand chisel and hammer.
Don’t forget to share this post 
References and Further Readings :
