But they do tend to space rafters in one of several industry-standard increments, typically either 12, 16 or 24 inches apart. These spacing intervals are measured “on center,” meaning that the measurement is taken from the center of one rafter’s horizontal surface to the center of the next rafter.
Thereof, How far can a 2×6 truss span?
Also to know is, How far apart do trusses need to be? 18-26 inches
Subsequently, question is, How far can a truss span? approximately 90′
Also, How many trusses do I need for a 24×24 garage?
3′ to 6′ depending on design and loading. As Mike said it will be about 13. It depends on the spacing and the spacing depends on the applied loads.
How much weight can a 2×6 truss hold?
On the other end, a 2×6 can support a V8 engine of between 600 – 700 lbs. Additionally, how much weight can a 2×8 ceiling joist hold? span can carry 10 psf while a 2×8 will carry 20 psf. Sistering the two together means a load-carrying capacity of 30 psf.
How far can I span a 2×6 Rafter?
How far can a 2×6 Rafter span without support? The table states that 2 X 6 rafters spaced 16 inches on center (o.c) can span a maximum distance of 13 feet 5 inches. Another option are 2 X 8 rafters spaced 24 inches o.c.
How far apart must roof trusses be?
about 24 inches
How far can steel truss span?
Trusses are highly efficient in bending and have been made up to 190 metres (623 feet) in span. Two-way grids can be made of either plate girders or trusses to span square spaces up to 91 metres (300 feet) in size; these two-way structures are more efficient but more expensive to build.
How far can attic trusses span?
20-24 feet
How far apart should roof joists be?
16-inches
How far can a 2×6 Rafter span without support?
How far can a 2×6 Rafter span without support? The table states that 2 X 6 rafters spaced 16 inches on center (o.c) can span a maximum distance of 13 feet 5 inches.
How far can a 2×6 span for a roof?
How far apart should steel trusses be?
With traditional stick-frame construction, the trusses are usually spaced 2 feet apart. For many traditional stick-frame builders, trusses spaced 8 feet apart seems unnatural, but thanks to the ingenuity of modern engineering it is a very common building design.
What is the maximum span for a 2×6 ceiling joist?
For example, the highlighted cell (below) shows that a 2″ x 6″ Southern Yellow Pine joist, with a grade of #2, and spaced 24″ apart can have a maximum span of 10 feet – 0 inches (10-0), if you are designing your structure to support a plaster ceiling.
How much weight can my trusses hold?
Ceiling trusses have a weight capacity around 10-12 lbs. per sq. ft. For ceiling trusses with a 2×6 chord, the weight capacity is slightly higher, around 12-15 lbs.
How much weight will a 2×6 hold?
480 pounds
Don’t forget to share this post 
References and Further Readings :