Yes, it would be against code to have a cabinet cover the junction box. Anywhere you connect wires to wires, or wires to fixtures, the connection needs to be accessible. Since your cabinet would be permanently affixed to the wall and covering the junction box, it wouldn’t be allowed.
Thereof, How do I find a hidden outlet?
Most outlets are located 18 to 24 inches off the floor, and wall switches are generally located about 4 feet above the floor. Carefully scan the wall surface in these areas for a hump created by the hidden box pushing against the drywall.
Also to know is, Does a junction box need a cover? A: It is important to cover an electrical junction box no matter where it’s located. … Not only does the cover protect the wiring from accidental human contact, it also prevents the spread of a fire should the wires overheat.
Subsequently, question is, Can I put a junction box anywhere? Any standard outlet, switch box, or light fixture box can serve as an approved enclosure, but where a wiring splice needs to occur in other locations along the circuit, the approved enclosure is usually a junction box.
Also, How do you install a hidden wall outlet?
Can you put an outlet inside a cabinet?
It is common practice to put receptacles in cabinets. While usually it for a fixed in place appliances such as a vent hood nothing says it can’t be for general purpose receptacles also. As stated by Xsleeper the cable must be protected. Easiest is run it in the wall.
How do I find an outlet behind drywall?
Run it at the level you suspect where the outlet is and if there is a covered outlet, there will be a noticeable hump in the wall. For the screws will draw the drywall pretty well to the neighboring studs but obviously not so where the covered outlet is. If you find one, the highest spot will be the outlet.
Can you cover a junction box?
A junction box is simply a standard electrical box that is mounted securely to house framing or another structure, containing the connection (splice) of two or more circuit cables. … Junction box covers must remain accessible; they cannot be covered with drywall or other surface material.
How do you install an outlet in a kitchen island?
Can I plaster over a junction box?
You CAN NOT plaster over or cover any junction box that is active. Junction boxes need to be readily accessible. If the box is disconnected, remove it, and then patch the hole.
Can you splice wires inside a wall?
Electrical splices can never left on their own in a wall or ceiling cavity. Instead, all splices must be contained within an approved junction box or fixture electrical box.
How do you fix a cut wire in a wall?
Can you cover a junction box in a wall?
A junction box is simply a standard electrical box that is mounted securely to house framing or another structure, containing the connection (splice) of two or more circuit cables. … Junction box covers must remain accessible; they cannot be covered with drywall or other surface material.
How do you splice electrical wires together?
Using the electrician’s pliers, twist together the stripped ends of the corresponding wires from each strand of 12/2 Romex, white wire to white, and black to black. Twist them until they are tightly joined, and secure each joint with a threaded wire cap/nut. Fold both sets of wires neatly into the junction box.
How do I keep wires in my wall?
There’s no need to drill a hole in your wall to hide the TV cords. Just wrap the cords together with zip ties, then corral them in an off-white piece of cloth (or a color that matches your walls) and voila — it blends in perfectly! Get the tutorial at In My Own Style.
How do you find a hidden outlet?
Most outlets are located 18 to 24 inches off the floor, and wall switches are generally located about 4 feet above the floor. Carefully scan the wall surface in these areas for a hump created by the hidden box pushing against the drywall.
Can I put a junction box in the wall?
Junction boxes must be installed where they are always accessible; never install a junction box in a concealed wall or ceiling space where the box cannot be accessed in the future. Junction boxes also must be covered with solid covers with no holes.
Don’t forget to share this post 
References and Further Readings :
