Why Yes; you can connect if both wire are to be use for same purpose, that is if the black wire is use for neutral and you intend to use the blue wire for neutral you can connect.
Likewise, Can black and red wires go together?
It’s possible to link two red wires together or a red wire to a black wire.
Also, Is the blue wire hot?
Blue and yellow wires are sometimes used as hot wires. Blue wires are commonly used for travelers in three-way and four-way switch applications.
Moreover, Does the red wire connect to black or white?
Sheathed cable with a red wire always is accompanied by a black wire, a white wire and a bare wire. Very old homes may have cable that excludes the bare wire.
Is blue wire positive or negative?
Yellow is positive, blue is negative.
What if you have black and red wires?
If the black and red are a hot and switchleg, then if connected to the black from the fixture it would mean the light is always on. If the black and red are 220V between them, then connecting them to the black from the fixture would burn up the fixture. You need to know which wire is 120V to neutral.
What happens if you switch black and red wires?
If you switched the wires, what would happen? Red is positive charge, black is negative charge. If you aren’t running if you aren’t connected correctly.
What are black and red wires?
Black, red, white with black or red tape will always indicate a hot wire. The term “hot” means these wires carry a live current from your electric panel to the destination. … Black or red wires always carry power from the service panel (breaker box) to your home’s devices. What are Red Wires?
Is brown or blue wire hot?
Brown is your hot wire so you want to connect that to your building’s black wire. The blue is negative or return, so that will go to white. Green with yellow stripe is the ground and will go to the building green.
Which wire is positive when both are black?
If the multi-colored wire is black and red, the black wire is the negative wire, while the red one is positive. If both wires are black but one has a white stripe, the striped wire is negative, while the plain black wire is positive. Look in the owner manual to determine which wires are negative in a car.
What do I connect the red wire to?
Normally you’ll see a red wire in places you would expect a ceiling fan. But in places like a bathroom or a wall light, if you see a red wire, it’s a good bet that the red wire is the wire that’s connected to the light switch.
Which wire is live red or black?
Answered by Dave, Electrical Safety Expert
The live Red becomes Brown. The Neutral Black becomes Blue. The Earth wires continue to be Green and yellow.
What are the white black and red wires?
The white wire is always neutral, and when the cable has only two conductors, as most 120-volt cables do, the hot wire is black. … The red wire is for the light switch. This configuration, sometimes called a half-hot or split-tab outlet, is becoming increasingly popular, so it’s good to know how to wire it.
Is a black and red wire positive or negative?
One is marked positive (+), the other negative (-). There are also positive and negative cables in the jumper cable set. The red one is positive (+), the black one is negative (-). Never connect the red cable to the negative battery terminal or a vehicle with a dead battery.
Is Red wire negative or positive?
The coloring is as follows: Positive – The wire for the positive current is red. Negative – The wire for the negative current is black. Ground – The ground wire (if present) will be white or grey.
What if I have two black wires?
You will get a reading if one wire is hot and the other isn’t. However, if both wires are hot, the reading will be zero. … However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It’s essential that you determine which black wire is hot before proceeding.
Why do I have 2 black wires and 2 white wires?
the black and white wires from the power supply side need to be attached to the line side of the new outlet. (it should say this on the back of the new outlet) and the other 2 are to be attached to the Load side of the outlet.
Why does my outlet have 2 black and 2 white wires?
The two black conductors are electrically bonded through the receptacle, as are the two white conductors. You’ll notice that the bonding tab on the side of the receptacle is still in place, which means that the two receptacles are connected together.
Is red wire negative or positive?
The coloring is as follows: Positive – The wire for the positive current is red. Negative – The wire for the negative current is black. Ground – The ground wire (if present) will be white or grey.
Where does red wire go on light fixture?
Attach the red wire from the light fixture to the nut at the top left of the switch. Connect the bare copper wire to the green nut at the bottom left of the switch. Push both switches into their boxes and secure them with screws at top and bottom. Turn on your power and test the switches.
Can I leave the red wire unconnected?
Look for the other end of the red wire in the box that has the fan switch. It could be unconnected in the box. Someone may have planned ahead and provided a second wire for a switched light on the fan. Just leave it.
Is red or black positive?
Each battery has two metal terminals. One is marked positive (+), the other negative (-). There are also positive and negative cables in the jumper cable set. The red one is positive (+), the black one is negative (-).
Is black wire positive and red negative?
The coloring is as follows: Positive – The wire for the positive current is red. Negative – The wire for the negative current is black. Ground – The ground wire (if present) will be white or grey.
What is red black and white electrical wires?
According to standards in use since the mid-1900s, a wire color code identifies the purpose of each wire in an electrical circuit. The white wire is always neutral, and when the cable has only two conductors, as most 120-volt cables do, the hot wire is black. … The red wire is for the light switch.
