Standard Instructions for Opening a Combination Lock
Table of Contents
READ ALSO
- Turn right three times. Stop at First Digit.
- Turn left one full turn passing 1st number and stop at Second Digit.
- Turn right and stop at Third Digit. Pull shackle. Profit.
Likewise, How do you reset a 4 digit combination lock if you forgot the code?
Take these steps to reset your lock:
- Pull up the shackle to open the lock.
- Rotate the shackle 90° counterclockwise and press all the way down.
- Hold down the shackle and set your own combination by turning dials.
- Turn the shackle back as normal. The setting is now complete.
Also, How do you open a Master combination lock with 4 numbers?
How to Open a Four Number Combination Lock
- Find your combination. …
- Go to the first number. …
- Set the second dial on the lock to the second number in the combination. …
- Use the third wheel to find the third number in the combination. …
- Locate the fourth number in the combination on the bottom wheel on the lock and center it.
Moreover, How do you change the combination on a 4 digit Master lock?
“Set-Your-Own” Combination Locks Instructions FAQ
- Open the lock (preset at 0-0-0).
- Turn shackle counterclockwise 180 degree and press it down. You must hold the shackle down while performing the next step.
- Set the dials to your new combination.
- Lift and return the shackle to the closed position.
How do you reset a Master combination lock if you forgot the code?
To set or reset the combination on your 175, 176, 177, or 178 padlock:
- Open the lock using the previous combination. …
- Insert the reset tool in the hole on the side of the lock. …
- Push the reset tool in and turn 90° in either direction. …
- Set wheels to your new combination.
- Turn and remove the reset tool.
Can you set your own combination Master Lock?
To set your own combination: With dials at 0-0-0-0, pull out the shackle. Turn shackle 90° (1/4 turn) and press it down. Continue pressing shackle and set the dials to your own combination.
