Locate your water filter cover in the upper right-hand corner inside your refrigerator or in the base grille. Lift the filter door up. Pull the filter out and discard it. Open your new filter and remove the protective coverings from the O-rings.
Table of Contents
READ ALSO
Likewise, Can I use my Whirlpool refrigerator without the water filter?
A filter isn’t needed if the refrigerator doesn’t have a bypass plug and the filter can be closed with the cap. The water and ice dispensers must be installed to work without a filter if the refrigerator has a bypass plug.
Also, Do you have to turn water off to change refrigerator filter?
When the water filter is at the bottom or its side and not in the top sticking down, you should turn off the water. … Once the water pressure is off it will release easily. Just make sure you get the correct filter for your fridge otherwise it will damage the water system.
Moreover, How do you reset the filter on a Whirlpool refrigerator?
Press and hold the “WATER FILTER” button for 3 seconds. When the system is reset, the water filter icon will return to its BLUE color and the words “Replace Filter” will disappear from the display.
What happens if I don’t change my refrigerator water filter?
Failing to change your fridge’s water filter can cause scaling and deposit buildup in the water and ice machine, which can seriously damage your fridge. This buildup tends to slow down the system, causing low flow, and negatively affects the flavor of your water.
How long do Whirlpool refrigerator water filters last?
When to Change the Whirlpool Refrigerator Water Filter
If a filter status light/indicator is not present, the filter should be changed every 6 months. If the water flow to the water dispenser or ice maker noticeably decreases before 6 months have passed, you may need to replace the water filter cartridge more often.
Will a refrigerator work without a filter?
Does a refrigerator work without a water filter? Yes, as long as the bypass plug is installed. The plug replaces the water filter in the water filter housing. Essentially, it blocks the water from entering where the filter should be.
What happens if you don’t change the water filter in your fridge?
Failing to change your fridge’s water filter can cause scaling and deposit buildup in the water and ice machine, which can seriously damage your fridge. This buildup tends to slow down the system, causing low flow, and negatively affects the flavor of your water.
How much water do I need to flush my new refrigerator filter?
It usually takes 3 to 5 gallons of water to completely flush your new water filter.
Where is the water filter located?
Most water filters are located in the grille at the bottom of the refrigerator or the back, upper-right corner of the inside of the refrigerator. Some models, usually older ones, have the filter on the outside in the back of the refrigerator on the water supply line.
How do you reset the ice maker on a Whirlpool refrigerator?
Press the on/off Switch
- Remove the ice tray and cover plate (or just the ice tray). …
- Turn the switch from on to off.
- Unplug the ice maker at the mains.
- Wait 10 minutes.
- Plug the ice maker in again.
- Turn the switch from off to on.
- Replace the ice tray and the cover plate as necessary.
How do I run a diagnostic on my Whirlpool refrigerator?
Starting Diagnostics
To do this open the refrigerator door and press one or both door switches, depending on your refrigerator type. Next press the refrigerator temperature (+) button three times in ten seconds and release the light switch or switches.
Is it really necessary to change your refrigerator water filter every 6 months?
Refrigerator filters should be replaced every 6 months. Never leave a filter in place longer than a year. The longer you use a carbon filter beyond its maximum capacity, the more harmful your water could become.
Can an old water filter make you sick?
Yes, your old filter can add bacteria to your water
The moist environment in the pitcher filter is perfect for multiplication, so bacteria can reach higher concentrations. This can make you sick if you continue to use the old filter.
Will an old water filter stop ice maker?
A clogged or incorrectly installed water filter can reduce the water flow to the ice maker and dispenser and could cause one or more of the following: Odd tasting ice or water. Ice maker not producing any ice.
Do Whirlpool Water Filters expire?
Do water filters expire? Water filters do not have an expiration date.
How long does a water filter in a refrigerator last?
The water filter is designed to last for approximately six months or 500 gallons. These numbers are approximate as the life of the filter is determined by water quality and frequency of use. Note: If the home is supplied with hard water, well water, the filter may need to be changed more frequently.
Is refrigerator water better than bottled water?
Water from fridge filters are far more clean than packaged drinking water which should be of utmost importance to us. Many filters clean water by reverse osmosis. Pressure is put on the incoming water which then flows through a semi permeable membrane that traps contaminants and the water comes out clean.
Does a fridge need a water filter?
If you have a water dispenser or an icemaker in your refrigerator, you’ll need a filter to remove small particles or contaminants, such as lead and chlorine, and impurities that cause bad tastes or odors. … If your refrigerator’s water-supply line uses a filter, replace that, too.
Will a bad water filter cause the ice maker not to work?
A clogged or incorrectly installed water filter can reduce the water flow to the ice maker and dispenser and could cause one or more of the following: Odd tasting ice or water. … Ice maker not producing any ice. Measure fill not working correctly.
Where is the filter on a refrigerator?
The majority of refrigerator filters are located in one of two locations: in the grille at the base of the fridge or in the back upper-right corner of the interior. In either location, you’ll see a knob or a button that will release the filter for removal.
Can you get sick from old water filter?
Yes, your old filter can add bacteria to your water
The moist environment in the pitcher filter is perfect for multiplication, so bacteria can reach higher concentrations. This can make you sick if you continue to use the old filter.
How long do water filters really last?
Filters used in commercial settings should be changed every 4 to 6 months. Filters in residential settings should be changed every 6 to 12 months. Reverse osmosis, membranes, and additional alkalisers only need to be changed ever 2 years or 4 years, respectively.
