The dryer thermal fuse is a safety mechanism that detects the temperature of air flowing to the outside vent. If the air too hot, the fuse blows, stopping an electric dryer (a gas dryer keeps running but won’t heat). Unfortunately, if the thermal fuse trips, it must be replaced before the dryer will work again.
Table of Contents
READ ALSO
Likewise, How do I know if the thermal fuse is blown?
How to tell if a thermal fuse has blown? To test if your thermal fuse has blown, touch the right side of your multimeter lead to the right side of the fuse, and repeat with the left multimeter lead. If the multimeter needle fails to move, this indicates the thermal fuse has blown.
Also, How much does it cost to replace a thermal fuse in a dryer?
Other Costs to Fix a Dryer
| Part | Material Cost | Total Cost |
|---|---|---|
| Thermal fuse | $5-10 | $80 -$130 |
| Dryer thermostat | $3-20 | $180 |
| Bearing | $50 | $130-$250 |
| Roller | $10-30 | $90-$230 |
Moreover, What causes dryer thermal fuse failure?
Answer: Clogged or restricted exhaust vent air flow is the most frequent cause of a thermal fuse blowing. Check the lint screen for lint or a build-up of debris that could be inhibiting air flow through the dryer. Pro Tip: when it comes to those thermal fuses, is they’re designed to open/fail if they get too hot.
Do Whirlpool dryers have a reset button?
Whirlpool dryers can do many things, such as monitor moisture levels and temperature, reduce noise, periodically tumble clothes to remove wrinkles, steam clothes and adjust the overall drying time according to fabric and load size. However, one thing a Whirlpool dryer cannot do is reset itself by pushing a button.
When I press the start button on my dryer nothing happens?
If your dryer won’t start when you push the start button, the most likely causes are a lack of power, a defective door switch, a blown thermal fuse or a bad start switch. … If it doesn’t turn on, it’s likely that the dryer has no power. Check your power cord and the house circuit breaker.
How do you tell if a thermal fuse is blown without a multimeter?
Testing By Bypassing The Fuse
If you do not have a multimeter, you can also test whether or not the fuse is working by bypassing the fuse itself. Simply detach the wires from the fuse, wire them together using a jumper wire and attempt to operate the dryer.
Are all dryer thermal fuses the same?
All dryers sold in the United States are legally required to have a thermal fuse. This is different from the electrical fuses that are found in many appliances, and a dryer might have both. A thermal fuse will blow when the temperature gets too high, not when it’s drawing too much current.
Why did my Whirlpool dryer stop heating?
When gas or electric Whirlpool Dryer is not heating up, it usually caused by: Burnt Heating Element or Gas Valve Solenoid, Burnt Thermal Cut-Off Fuse, Defective Cycling Thermostat Or Gas Ignitor, Malfunctioned Flame Sensor.
How long should a dryer last?
The average clothes dryer lasts between eight and 12 years, according to Angie’s List. But the more you use that dryer, the shorter its lifespan is likely to be. Also, a higher-quality dryer is likely to outlast a cheaper model with inferior components.
Why is dryer not drying?
Check the Air Vent and Duct
Clogged air vents are a common cause for poor airflow in clothes dryer systems. One way to see if your dryer’s air vent is clogged is by turning on your dryer and going outside to feel the flow of air leaving the vent. If it’s slow and not very warm, your vent may be due for a good cleaning.
Do thermal fuses wear out?
After many years of use, a fuse can wear out and simply stop working. The overheating of your dryer could lead to a thermal fuse that will blow, if any of these are present. If you don’t know what caused the fuse to fail, you’ll have to replace it.
What would cause a Whirlpool dryer not to start?
Sometimes a Whirlpool dryer not starting is more of a power issue than a dryer malfunction. … Make sure the dryer is correctly plugged into the proper electrical outlet. Check for tripped breakers or blown fuses. If needed, reset any tripped breakers and replace blown fuses.
How do you reset a Whirlpool dryer?
Whirlpool Tumble Dryer Reset Procedure
- Turn on the tumble dryer main power.
- Within 10 seconds turn the program selector from off to teh 6 o’clock postion, pointing straight down.
- Push the “Start” button three times.
- Turn the program selector to the “one” position which should be the CW or airing program.
Where is the reset button on a dryer?
Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes.
Does a Whirlpool dryer have a reset button?
Whirlpool dryers can do many things, such as monitor moisture levels and temperature, reduce noise, periodically tumble clothes to remove wrinkles, steam clothes and adjust the overall drying time according to fabric and load size. However, one thing a Whirlpool dryer cannot do is reset itself by pushing a button.
What happens if dryer thermal fuse is bad?
A thermal fuse will blow when the temperature gets too high, not when it’s drawing too much current. When it blows, the dryer stops generating heat. It’s necessary to replace it before the dryer will run again.
Can I use any thermal fuse on my dryer?
Electric dryers use two household fuses or circuit breakers. The drum can still turn if just one fuse is blown, but there will be no heat. You may need to replace both fuses or reset both circuit breakers. If the dryer’s thermal fuse has blown due to a power surge or other mechanical problem, the dryer won’t heat.
How much does a thermal fuse for a dryer cost?
Other Costs to Fix a Dryer
| Part | Material Cost | Total Cost |
|---|---|---|
| Thermal fuse | $5-10 | $80 -$130 |
| Dryer thermostat | $3-20 | $180 |
| Bearing | $50 | $130-$250 |
| Roller | $10-30 | $90-$230 |
Are Whirlpool thermal fuses universal?
Thermal fuse WP3392519 shuts off the burner in a gas dryer or the motor in an electric dryer when the dryer overheats. A universal part, widely used in dryers of various brands: Whirlpool, Maytag, Kenmore, Crosley, Amana, Admiral, Estate, Roper, etc. Different from Thermostat, the Fuse is not resettable.
How do I know if my dryer heating element is bad?
Inspect the metal wire coil for any breaks in the wire. If the wire is solid and has no breaks in it, the heating element should be good. If the wire has a break in it, the heating element is defective.
How do you know when you need a new dryer?
4 Signs That You Need a New Dryer
- Your Clothes Aren’t Drying Properly. Do you feel wet or damp areas when you remove your clothes from the dryer? …
- Excessive Noise. Do you often hear a lot of noise, such as rattling, banging, or high-pitched squealing? …
- It’s Too Old. …
- You See Exposed Wiring.
How long should a Whirlpool dryer last?
The average dryer lasts about 13 years. The average residential dryer will last 13 years.
Is it worth repairing a tumble dryer?
Updating your tumble dryer every ten years means you can benefit from new technology and more efficient heating methods which may reduce energy use and save you money on your bills. At ten years or older, a new tumble dryer is often a better investment as well as preventing you from paying for costly repairs.
