Sometimes, the issue could be with a device setting, loose jack, or tangled wires. Using simple methods, you should be able to resolve the problem of one side earbud not working. Throwing away faulty earbuds always seems to be the easy way out.
Table of Contents
READ ALSO
Likewise, How do I fix my earbuds if only one works?
If a single earbud only cuts out occasionally, try twisting and taping the cord until sound comes through it again. If twisting the cord doesn’t work, you may need to open the earbud and solder the connection if you’re able to. In some cases, you may need to buy new earbuds.
Also, Why is my left Powerbeats Pro not working?
Reset Powerbeats
Hold down both the power button and volume down button for 10 seconds. When the LED indicator light flashes, release the buttons. Your earphones are now reset and ready to be set up with your devices again.
Moreover, How do you pair left and right earbuds?
Take the left and right earbuds out the case and long press the touch control area at the same time for about 3 seconds or until you see a white LED light flashing on both earbuds. It is very important that you long press the left and right earbud at the same time.
How do you fix one side of Bluetooth earbuds not working?
To fix wireless headphones or Bluetooth Earbud whose one side only work simply start by booting your headphones, if it doesn’t solve the issue then resetting its Bluetooth and re-pairing it is your next step.
Why is only one of my Indy earbuds working?
Turn off Bluetooth mode on your device (mobile or computer) Power on only your right Indy™ Wireless earbud by removing it from the case. It will be in a non-connected state at this point. … Next, remove both earbuds from the case to have them automatically power on and begin pairing to one another.
Why is one side of my wireless beats not working?
It may be that you have half plugged the cable and so the headphone does not receive signals for one side. Therefore, it is highly recommended that you check and make sure the cable jack is fully plugged in. If required, eject the cable and plug it back in properly. Hopefully, it should resolve the issue for you.
Why are my Beatsx not turning on?
Hold down both the power button and volume down button for 10 seconds. When the LED indicator light flashes, release the buttons. Your earphones are now reset and ready to be set up with your devices again.
Why is only one side of my Powerbeats working?
If one of the buds stopped working, connect to the device you previously connected on, then disconnect. Put the buds back in the case, reset. Reconnect with the new device. – At this point both buds should start working.
Why is only one side of my Bluetooth earbuds working?
Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings. You’ll see a slider displaying left and right.
Why won’t my earbuds connect to each other?
Step 1: While the headphones are charging (the white LED indicator of earbuds is on), double-press the power keys of both sides to reset the headphones. Remove both the headphones from charging case, then both headphones power on automatically and connect each other within 60 seconds. … Take both earbuds out.
Why wont my wireless earbuds turn on?
If your Bluetooth headphones won’t turn on, it’s probably not broken. You simply need to reset it. … If your device can find the headphones, but the two won’t pair successfully. If your headphones keep disconnecting from your device, even though they’re both fully charged.
Can you only hear out of one earbud on iPhone?
If your iPhone’s audio settings are improperly configured, you’ll likely hear one-sided playback. Turn off mono audio from the “Accessibility settings” to allow a left and right playback. … If this mode is enabled, you’ll only hear sound on one side of the headset.
Why is one of my JLAB earbuds not working?
Your Jlab earbuds need to be manually reset
Place your earbuds in the charging case, leaving the case open. Beginning with one of your earbuds first, you should tap the button 4 times. We should see blue lights blinking 4 times before turning a solid blue. Repeat this for your other earbud.
Why is my Haylou earbuds not working?
You can try to solve your problem by restoring the GT1 to factory-settings: ① Delete all the Bluetooth names of “「Hayloy-GT1_L」and「Haylou-GT1_R」” on your phone. ② Take out the two earbuds from the charging case, and keep pressing for about 5 seconds on the left and right earbud touch areas at the same time.
Why are my Indy fuel wont pair together?
Check to see if the removable Stability Ear Gel or in-ear gels have been twisted or are falling off. This could be keeping the buds from sitting correctly in the case. If you’re having a hard time closing the lid completely, it is likely because the earbuds are not set correctly or the gels are interfering.
Why do my Indy earbuds keep disconnecting?
1- Check to see if any debris is blocking the charging pins at the bottom of the case, or on the bud. 2- Check to see if the removable Stability Ear Gel or in-ear gels have been twisted or falling off, this could be keeping the buds from sitting correctly in the case.
What to do if one side of beats stopped working?
Reset Studio or Studio Wireless
- Press and hold the power button for 10 seconds.
- Release the power button.
- All of the Fuel Gauge LEDs blink white, then one LED blinks red. This sequence happens three times. When the lights stop flashing, your headphones are reset.
How do I fix my JBL one side not working?
How To Fix Wireless Headphones With One Side Don’t Work Issue
- Check the side balance.
- Check Your Track Mono Or Stereo.
- Power off/on your headphone.
- Reconnect Bluetooth.
- Insert the sound cable plug while playing audio.
- Pull out back the sound cable while playing audio.
- Reset your wireless headphone.
How long do beats last?
Beats claims up to 40 hours of life – and they do last so long – but naturally you can also plug in a 3.5mm cable for a wired connection to your phone. Or charge them up for five minutes to get three hours of playback time.
How do you fix Bluetooth headphones that won’t turn on?
You can:
- Make sure your device’s Bluetooth is turned on.
- Unpair all devices connected to your headset.
- Restart your smartphone or laptop.
- Delete your headset from your device and rediscover it.
- Make sure your headset is in close proximity to your device.
- Charge your headset and your device.
Can you use BeatsX while charging?
You can play and charge them at the same time.
How do I know if my beats are dead?
5 white lights signal full or near-full charge. 1 solid red light signals low charge. 1 flashing red light signals battery is near depletion. No lights signal headphone is powered off or battery is not charging.
