Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground. Red wire is sometimes included and acts as a conductor to carry power to the light kit.
Table of Contents
READ ALSO
Likewise, How do you wire a ceiling fan with a 3 way light switch?
For individual control of the fan and light, connect black wire to ceiling fan black wire and connect the red wire to ceiling fan blue wire. Secure all the connections with orange wire nuts. Then, neatly place all wires into the ceiling box and secure the covers for the fan.
Also, Which color wires go together?
US, AC:The US National Electrical Code only mandates white (or grey) for the neutral power conductor and bare copper, green, or green with yellow stripe for the protective ground. In principle any other colors except these may be used for the power conductors.
Moreover, Where does red wire go on ceiling light?
Normally you’ll see a red wire in places you would expect a ceiling fan. But in places like a bathroom or a wall light, if you see a red wire, it’s a good bet that the red wire is the wire that’s connected to the light switch.
What is black wire in ceiling light?
The single black wire is the wire that returns from the light switch and should have a small piece of red tape on it to denote it becomes live when the light switch is turned on this wire goes into the brown of the light fitting. The two blacks do indeed go to the blue of the light as they are neutrals.
What does blue wire mean?
Blue wire generally refers to a type of wire or cable that is added to a hardware product at a factory in order to resolve design problems. Blue wires are also known as bodge wires in British English.
Is blue wire neutral?
The blue wire, also referred to as the neutral wire, has the function of transferring electricity away from the appliance. The brown wire, otherwise known as the live wire, transfers electricity to the appliance. … The green and yellow wire is also referred to as the earth wire and has a key safety function.
Is blue wire positive or negative?
Yellow is positive, blue is negative.
Can black and red wires go together?
It’s possible to link two red wires together or a red wire to a black wire.
What do I do with the red wire when installing a ceiling light?
If turning the switch off turns the wire off, the red wire delivers power from the light switch.
Can I tie red and black wires together?
If the red and black wires are connected together already and energized, yes you can do that but you will need a pull chain light or a remote control, if they are not switch controlled.
What happens if you wire a ceiling light wrong?
Tip. The fixture still works if you reverse the wires, but the socket sleeve will be hot, and anyone who touches it while changing a bulb can get a shock. When wired correctly, the socket sleeve is neutral and only the small metal tab at the base of the socket is hot.
Why are there 3 black wires on my light switch?
One of the black wires is probably the feed from the breaker box. One is probably a feed to the receptacles. The third one would go to the light. The receptacle wire should be connected to the feed wire along with one terminal of the switch.
What happens if you wire live and neutral wrong?
If your outlet’s polarity is reversed, it means that the neutral wire is connected to where the hot wire is supposed to be. This may not sound like a terrible thing, but it is. There is always electricity flowing out of an outlet with reversed polarity, even if an appliance is supposed to be off.
What is the purpose of the blue wire?
Blue wires are used as travelers, usually on three- or four-way switches (controlling a light from multiple locations) or as switch legs for things such as fans or lights. Yellow wires are almost always used as switch legs for outlets, fans, or lights.
Does blue wire go to black or red?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch.
Where does the blue wire go on a light switch?
The faceplate of a single, one-way switch has two terminals: “L1” is the terminal to which the neutral core wire is attached – the blue wire (traditionally black, before the change). “COM” or “Common” is the terminal to which the live core wire is attached – this is the brown wire (formerly red).
What do I connect the blue wire to?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch.
What Colour is blue wire?
Table of UK plug wiring colours
| Wire | Colour |
|---|---|
| Live | Brown |
| Neutral | Blue |
| Earth | Yellow and Green |
What is a blue wire used for?
Blue wires are used as travelers, usually on three- or four-way switches (controlling a light from multiple locations) or as switch legs for things such as fans or lights. Yellow wires are almost always used as switch legs for outlets, fans, or lights.
Do I connect the blue wire to the black wire?
single Switch Ceiling Fan Wiring
Note that the blue wire is connected to the black fan wire so that they can both be operated by the same switch. Connect the ceiling fan blue wire to both the black fan wire and the black wire from the ceiling. … These wires are commonly green, yellow or bare copper.
Is blue and black wire same?
A blue wire may be connected to a negative terminal of the power source. A blue wire should be connected to a positive terminal and a black wire should be connected to a negative terminal in a two wire system. …
Is green or blue wire positive?
The good news is that the matching is very easy. Brown is your hot wire so you want to connect that to your building’s black wire. The blue is negative or return, so that will go to white. Green with yellow stripe is the ground and will go to the building green.
