Blue wire generally refers to a type of wire or cable that is added to a hardware product at a factory in order to resolve design problems. Blue wires are also known as bodge wires in British English.
Table of Contents
READ ALSO
Likewise, Which wire is positive when both are black?
If the multi-colored wire is black and red, the black wire is the negative wire, while the red one is positive. If both wires are black but one has a white stripe, the striped wire is negative, while the plain black wire is positive. Look in the owner manual to determine which wires are negative in a car.
Also, Is the blue wire hot or neutral?
Blue and yellow wires are sometimes used as hot wires and as travelers, green wires (and bare copper wires) are ground wires, and white and gray wires are neutral.
Moreover, Is blue wire positive or negative?
Yellow is positive, blue is negative.
Does blue wire go to red?
Your power supply line (the black wire) should be feeding both switches and those switches power the fan (black) or the light (blue). … Connect black fan wire to the black ceiling wire. Connect the blue wire to the red wire. Connect white wires together.
Why does light switch have 2 black wires?
The bare or green-wrapped ground wires serve as a backup to divert the power safely away in case of an electrical fault. In most cases, two black wires will be attached to the switch’s two terminal screws. … The ground wires will be connected to each other and attached to the grounding screw on the switch.
How can you tell if a wire is load or line?
Load Wire – Generally connected to the top half of your switch. If the wire is coming from the top of the switch box, it is likely your load wire. Line Wire – Generally connected to the bottom half of your switch. In some cases, line wires are marked with “line”, “pwr”, or a lightning bolt symbol.
Why do I have 2 black wires and 2 white wires?
the black and white wires from the power supply side need to be attached to the line side of the new outlet. (it should say this on the back of the new outlet) and the other 2 are to be attached to the Load side of the outlet.
Do I connect the blue wire to the black wire?
single Switch Ceiling Fan Wiring
Note that the blue wire is connected to the black fan wire so that they can both be operated by the same switch. Connect the ceiling fan blue wire to both the black fan wire and the black wire from the ceiling. … These wires are commonly green, yellow or bare copper.
Can a white wire be hot?
The term “hot” is used for source wires that carry power from the electric service panel to a destination, such as a light or an outlet. Even though you are permitted to use a white wire as a hot wire by marking it with electrical tape, the opposite is not recommended or allowed.
Which wire is live red or black?
Answered by Dave, Electrical Safety Expert
The live Red becomes Brown. The Neutral Black becomes Blue. The Earth wires continue to be Green and yellow.
Is blue wire live wire?
The blue wire, also referred to as the neutral wire, has the function of transferring electricity away from the appliance. The brown wire, otherwise known as the live wire, transfers electricity to the appliance. … The green and yellow wire is also referred to as the earth wire and has a key safety function.
Is white or blue wire positive?
White is positive while blue is negative.
Does red wire go to white or black?
Sheathed cable with a red wire always is accompanied by a black wire, a white wire and a bare wire. Very old homes may have cable that excludes the bare wire.
Does blue wire go with black wire?
The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch. You should twist the black and blue wires the same way you did the previous wires.
Can black and red wires go together?
It’s possible to link two red wires together or a red wire to a black wire.
Why would a light switch have 3 black wires?
If the light turns on, the second black wire you connected to the switch is the switch feed and the unconnected black wire is the feed to the other loads. If the light doesn’t turn on, then it’s the other way around: the connected wire feeds the other loads and the disconnected wire is the light feed.
Which color wire is positive?
The coloring is as follows: Positive – The wire for the positive current is red. Negative – The wire for the negative current is black. Ground – The ground wire (if present) will be white or grey.
What happens if you wire a switch backwards?
The outlet will still work if you connect the circuit wires to the wrong terminals, but the polarity will be backward. When this happens, a lamp will have its bulb sleeve energized instead of the small tab inside the sockets.
Is load wire white or black?
So, what color is the load wire? Load wires are mostly black, but red can also be used as a secondary load wire. They are also connected to the switch’s top half, while line wires are connected to the switch’s bottom half.
Which wire is line and which is load?
With the first device, the line is the wire running from the service panel to the device, and the load is the wire running from the first device to the second device downstream on the circuit.
What happens if you mix up hot and neutral wires?
This happens when the hot and neutral wires get flipped around at an outlet, or upstream from an outlet. Reversed polarity creates a potential shock hazard, but it’s usually an easy repair.
Why does my light switch have 3 black wires?
If the light turns on, the second black wire you connected to the switch is the switch feed and the unconnected black wire is the feed to the other loads. If the light doesn’t turn on, then it’s the other way around: the connected wire feeds the other loads and the disconnected wire is the light feed.
What happens if you connect a hot wire to a neutral wire?
Tying together the hot and neutral wires creates a short circuit, which should immediately trip the circuit breaker.
Should the white wire be hot?
White wires augmented with red or black tape or markings are used as hot; however, a black wire can never be used as a neutral or ground wire, or for any purpose other than to carry a live electrical load.
