Thereof, Why is my HVLP spray gun spitting?
Spray guns spit when air is being introduced into the fluid outside of at the air cap. … Fluid Nozzle – The first area to check if your spray gun is spitting is the fluid nozzle. A loose fluid nozzle does not properly seat in the tip of the spray gun and causes air to enter the fluid supply resulting in spitting.
Also to know is, Can you spray house paint with HVLP gun? HVLP systems are not designed to spray heavier bodied latex paint. However, with some understanding you can successfully do so. If you look at most professional airless paint sprayers designed for latex paint, they are actually pumps, and use no air. …
Subsequently, question is, What is a good size air compressor for spray painting? 15 gallons
Also, How much CFM do I need for a spray gun?
12 CFM
How do you thin paint for HVLP?
Thin the paint with water and mix well before spraying. The amount of water required varies with the brand and quality of the paint. Start by thinning the paint by adding 10 percent water and mixing thoroughly. If the paint is still too thick, add a small amount of water and mix again.
How do you thin paint for a paint sprayer?
– Pour the paint into the bucket.
– Add ½ cup of water for every gallon of paint.
– Mix thoroughly.
– Check the thickness by running the paint through a funnel. If it flows freely through the funnel, you know the paint is thinned enough.
Can you use an air compressor to spray paint?
Using an air compressor and a paint sprayer can help you cover more space at one time and can help you make sure that you get an even coat of paint on your surface.
What size air compressor do I need for a paint sprayer?
A typical spray gun will require low pressure, and HIGH volume, FAR more than any standard compressor yields. This one, for example, requires between 0-70 PSI, but 12 CFM. 12 CFM is far more than ANY standard compressor provides, not even in bursts. Or, this one, requires 10-14 CFM.
Are HVLP spray guns any good?
The HVLP Paint Sprayer is much healthier to use than the ordinary air compressor models, as there is less overspray. Therefore, the spray cloud it produces is a lot less and more controlled. So, the less waste produced, and low power usage makes it eco-friendly as well as economical to run.
What paint to use on HVLP?
Water-based paints In the other hand if you decide to use HVLP Spray Guns for wood then you will complete the job a lot faster, the color quality will be perfect and you don’t need any experience with spray guns to get good results.
Can you use a HVLP gun with an air compressor?
 An HVLP Spray Gun will therefore typically require a larger compressor though there are a few HVLP Spray Guns that can work with smaller compressors (they usually will be limited though on coatings that they can effectively atomize more so than HVLP’s using Higher air volumes (CFM).
How much pressure does a HVLP gun need?
Setting the air pressure to about 28-29 PSI for clear will ensure you having great flow out. Most HVLP spray guns will use 10-14 scfm at 40 psi. This is volume of air pressure per cubic foot.
What compressor do I need for HVLP?
HVLP guns require plenty of air, so you may have to buy a larger compressor. The manufacturer of the gun shown recommends a minimum of a 3-hp compressor with a 20-gallon tank. Although this is an added investment, you can use the compressor to power other tools.
What size air compressor do I need to run a spray gun?
12 CFM
Do I need to thin paint for airless sprayer?
Latex paints are the most demanding when it comes to straining. They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. … If you’re using a handheld or HVLP system, you’re probably going to have to use as much as 20-30% water.
Do you need to thin paint for a sprayer?
Is it necessary to Thin Latex Paint for Spraying? Yes, the latex paint does need to be thinned. Even though latex paint is water-based, it is thicker than the oil-based paint varieties. The thick latex paint needs to be thinned to be able to spray a fine mist of paint.
Don’t forget to share this post 
References and Further Readings :
