Expert Reply: Yes, a 4.80-12 trailer tire uses a 12 inch diameter wheel that is 4 inches wide. The 4.80 spec is the width of the tire. … They come with either a 4 on 4 inch bolt pattern or a 5 on 4-1/2 inch bolt pattern.
Table of Contents
READ ALSO
Likewise, What does 4.80 mean on a tire?
On your current tires, the 4.80 number represents the section width of the tire, or the width across the tread. The second number is the wheel diameter size. You have a wheel that has a 8 inch diameter.
Also, What does speed index mean on tires?
Print. The speed rating tells you the speed the tire can safely maintain over time. A higher speed rating usually means you will have better control and handling at higher speeds — and that the tire can take the extra heat. As a general rule, tires with higher speed ratings also handle better at slower speeds.
Moreover, What size tire is a 4.80 4.00 8?
The overall diameter of a 4.80/4.00-8 tire is 16.1 inches. The overall diameter of the 5.70-8 tire is 18.1 inches.
How do you read a wheelbarrow tire?
A common sizing system for wheelbarrow and hand-cart tires are 2 numbers, separated by a hyphen. The size could also be a series of 3 numbers separated by an “X” or a “/”. The two most common sizes are 4.00 – 6 and 4.10 – 6. The first number is the height of the tire sidewall, and the second number is the rim diameter.
What size tire is a 4.10 3.50 4?
4.10/3.50-4″ (10.5″ diameter) with a 2.25″ offset hub and 5/8″ ball bearings. This tire and wheel assembly is commonly used on hand trucks (dollies), generators, power washers and other utility equipment.
How wide is a 480 tire?
| Tire size conversion chart | |
|---|---|
| Inch size | Metric conversion (mm) |
| 31.5 | 800 |
| 35.4 | 900 |
| Formula for metric to English conversion: divide the metric number (in mm) by 25.4 to get inches | Example: 480-mm section width / 25.4 = 18.89-in . section width tire |
What does H and T mean on tires?
The codes on the sides of tires are unfamiliar to most car and truck owners, but knowing what the codes mean is important to choosing the proper tires. The H/T on tires stands for highway/terrain.
What does the T mean on tires?
A “T” means it’s a temporary spare. Some tires get a “Z” or an “F” attached to the radial indicator, denoting a Z-rated tire (see service description below) or a run-flat tire.
What is a tire speed rating of T?
Tires with a maximum speed capability higher than 300 km/h (186 mph), require a “ZR” in the size designation.
…
Tire Speed Rating Chart.
| SPEED SYMBOLS | ||
|---|---|---|
| T | 190 | 118 |
| U | 200 | 124 |
| H | 210 | 130 |
| V | 240 | 149 |
What size tire is 5.70 8?
The overall diameter of a 5.70 x 8 tire and wheel is 18.1 inches. The overall diameter of the tire that you referenced # AM1002 is 16.1 inches.
What size tire is 5.30 12?
The 5.30-12 tire that you currently have has a section width of 5.3 inches and has a diameter of 21.9 inches. The ST145/R12 size tire that you are wanting to replace it with has a section width of 5.7 inches and has a diameter of 21.3 inches.
What is the size of a wheel barrow?
It measures 58.75 inches in length, 25.5 inches in width , and is 27 inches high.
…
What size is a standard wheelbarrow?
| Product Dimensions | 19 x 16 x 15 inches |
|---|---|
| Department | Bedroom |
• 6 févr. 2020
How do you read rim sizes?
Locate the stamped size on the back of the hub on the rim. This is the assigned measured size of the rim, and it is broken into three sizes: diameter, width and bolt pattern. For example, a 14 by 6 by 4.5 reading on the rim indicates that the diameter of the rim is 14 inches, and it will accommodate most 14-inch tires.
What does tire size 22×11 10 mean?
The numbers 22-11-10 represent the dimensions of the tire. The first number is the height, the second number is the width & the third number is the diameter of rim that it will fit on. … As long as the width of the tire is greater than the width of the rim they should mount together just fine.
What does 3.5 8 mean on a tire?
8″ is your, and my, rim size. This tube is for a rim (metal part of a wheel) which has a diameter of 8″, thus we are OK so far. In our cases, 3.50 refers to tire width and in this nomenclature case (“3.50 – 8”) 3.50 is also the distance from tire edge to the rim (or the sidewall distance).
How wide is a 1050 tire?
The standard size of the 31×10. 50 is 30.5 inches in diameter and 10.5 inches wide.
How wide are 1250 tires?
Tire Width – “1250”
Standard tire width is indicated in inches with the decimal point removed. Therefore, in this example, the number 1250 indicates that this tire is 12.5″ wide.
What does R46 mean?
R46 or R-46 may refer to: R-46 (missile), an intercontinental ballistic missile design by the Soviet Union during the Cold War. R46 (New York City Subway car), a subway train car.
What do the numbers mean on a wheelbarrow tire?
A common sizing system for wheelbarrow and hand-cart tires are 2 numbers, separated by a hyphen. … The first number is the height of the tire sidewall, and the second number is the rim diameter. To get the overall diameter you need to do some math! 6 (rim diameter) + 4.00 (sidewall height) X 2 = 14 inches total diameter.
What is Y speed rating?
Y speed rating
Y speed rated tires have been tested at speeds up to, and in excess of, 186 mph (300 km/h) under optimal conditions. If Y speed rating is indicated without parentheses (as normal), this means the tire is rated up to 186 mph.
Which is better H or T rated tires?
A speed rating of T indicates that the tire can be safely driven up to 118 mph. A tire with an H rating has a higher limit — 130 mph — which means it can be safely driven faster than the tire with the 94T code. Manufacturers may produce identical tire models with different speed ratings.
Can I use 235 tires instead of 225?
Are 225 and 235 Tires Interchangeable? Yes, they are. However, this is only possible if your car’s rims can accept the larger millimeter.
What does 70 mean on a tire?
If a tire has an aspect ratio of 70, it means the tire’s height is 70% of its width. Lower aspect ratio tires, such as a 60 series, generally offer vehicle handling performance advantages over higher aspect ratio tires, such as a 75 series, but a typical trade off can be ride harshness. Construction.
How do you read a tire date code?
The first two numbers indicate what week of the year it was made (out of 52 weeks per year), and the second two numbers represent the year. For example, 5200 would reveal that a tire was manufactured during the 52nd week of the year 2000.
