With a cup, scoop out the contents of the sink. This’ll make it easier to get to the plug. With a rubber glove on, push down on the plug and attempt to twist it anti clockwise. If that doesn’t work, spray WD-40 on to the plug, give it a minute to work itself under the plug, then repeat step 2.
Table of Contents
READ ALSO
Likewise, Can you replace a pop up sink plug?
If any of the components of your pop-up mechanism are broken or otherwise need replacing, it’s an easy job you can do yourself. Remove the stopper (see #2 above).
Also, Can you replace a pop up plug with a normal plug?
Yes, but a waste that’s designed for a plug has a grille set down 10mm or so for the plug to sit on. But if you can find a suitable plug then happy days. I replaced the pop up plug with a standard 1.5″ plug and chain – leaving the horizontal rod with the threaded can in to stop sink waste water coming out.
Moreover, How does a pop up sink plug work?
The “pop-up” waste operates the drainage plug by lifting a lever, which is located directly behind the faucet, up and down. … Even if your drain plug is pushed down, with an overflow sink and overflow drain plug combination water will still be able to drain from your sink.
Why won’t my pop-up plug stay down?
If the stopper moves as it should but doesn’t stay put, all you need to do is tighten the nut (turn it clockwise). If the action is too stiff, loosen the nut a little. Check the action and adjust until it feels about right. Make sure the two rods are connected.
How do you remove a pop-up drain stopper?
Hold the body of the stopper in place with one hand and with the other hand unscrew the knob by turning it counter-clockwise. If the knob will not unscrew, then wrap the rag around the knob and use the pliers to help remove the knob.
