– Manually turn on your TV.
– Aim your remote at the TV panel and press and hold the TV button.
– Once the light is turned on, at the same time, press and hold the “On/Off” button until the light turns on again.
– Press the Play or the Slow button on your remote for five seconds.
– Turn ON Westinghouse TV.
– Press and hold MUTE & SELECT for two blinks.
– Enter 9 9 1, wait two blinks.
– Enter 1.
– Press and release VOL UP.
– Point the remote at the TV and keep pressing and releasing the CH UP key, if and when the volume changes.
– Press select to lock in code. …
– Set the “Mode” to TV.
Thereof, How do you reset the codes on a RCA universal remote?
– Remove the batteries.
– Press and hold down the #1 button on the keypad for 60 seconds – Note: You may need to do this 3-5 times to clear the remote.
– Insert batteries.
– Begin reprogramming – Note: After resetting the remote control, reprogramming is required.
Also to know is, How do I program my RCA universal remote with code search button? Press and hold the Code Search button on the universal remote until the light turns on. While still holding the Code Search Button, press the button on the universal remote that matches the equipment you’re pairing (e.g. if it’s a DVR, press the button for DVR).
Subsequently, question is, How do you reset an RCA universal remote? – Remove the batteries.
– Press and hold down the #1 button on the keypad for 60 seconds – Note: You may need to do this 3-5 times to clear the remote.
– Insert batteries.
– Begin reprogramming – Note: After resetting the remote control, reprogramming is required.
Also, How do you reprogram a universal remote control?
Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.
Can you program any remote to any TV?
If the remote control is a modern UNIVERSAL remote control, then your answer is probably yes. The universal remote can be programmed to work on a different TV set. This newly reprogrammed universal remote will now NOT control the previous TV is was programmed with, unless the old TV and the new TV were the same brand.
How do you reset a universal remote control?
– Remove the batteries.
– Press and hold down the #1 button on the keypad for 60 seconds – Note: You may need to do this 3-5 times to clear the remote.
– Insert batteries.
– Begin reprogramming – Note: After resetting the remote control, reprogramming is required.
How do you program a one for all remote control?
Step 1: First, press down the MAGIC key on your remote. Step 2: Next, select the device you want to control. Step 3: Finally, hold down the digit on the remote for your brand & device (e.g. 6 for Samsung TV). As soon as the device turns off, release the key and the LED on the remote will blink twice.
Do you need the original remote to program a universal remote?
If you no longer have the original remote that came with your TV, use a universal remote instead. Universal remotes are programmable to any TV by using the right programing code, however, depending on the model of your universal remote, there are a few different ways to program a universal remote to your TV.
Can you program a directv remote to any TV?
Program remote for an HD DVR or HD receiver Select Settings > Remote Control > Program Remote. Choose the device (TV, audio, DVD) you wish to program. If you don’t see your TV or device listed, use the code lookup tool to find the 5-digit code. Follow the on-screen prompts to complete programming.
Are remote control codes universal?
The codes are the universal defaults for that particular TV, DVR, DVD or VCR. Whether your universal remote control is made by GE, Sony, RCA or Philips, the codes will work if programmed correctly.
Can you program a remote to any TV?
Every device (TV, cable box, audio system, etc.) has a different code to enable it to pair with a remote. Different brands and different models use different codes. Check your TV manual for the code. If it is not there check for a list of codes often associated with the brand (often comes with the Remote’s manual).
How do I program my universal remote to my RCA TV?
– Manually turn on your TV.
– Aim your remote at the TV panel and press and hold the TV button.
– Once the light is turned on, at the same time, press and hold the “On/Off” button until the light turns on again.
How do I program my Dish remote to my Westinghouse TV?
How do you program a one for all RCA remote?
– Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). …
– On the remote control,press a device key once (i.e., DVD/VCR, CBL/SAT,or TV). …
– Press and hold SET until the LED (red light) blinks twice, then release SET.
How do I reprogram my RCA universal remote?
– Manually turn on your TV.
– Aim your remote at the TV panel and press and hold the TV button.
– Once the light is turned on, at the same time, press and hold the “On/Off” button until the light turns on again.
– Press the Play or the Slow button on your remote for five seconds.
How do I program my Dish remote to my TV?
– Press the Home button on your DISH remote twice. …
– Select Settings from the on-screen menu.
– Select Remote Control from the on-screen menu.
– Use the on-screen menu to select the device you want to pair.
– Select the Pairing Wizard option from the menu.
Don’t forget to share this post 
References and Further Readings :