How do you open a 4 digit Master Lock?

How to Open a Four Number Combination Lock

1. Find your combination. …
2. Go to the first number. …
3. Set the second dial on the lock to the second number in the combination. …
4. Use the third wheel to find the third number in the combination. …
5. Locate the fourth number in the combination on the bottom wheel on the lock and center it.

Likewise, How do you unlock a master lock if you forgot the combination?

Resetting your Combination Lock

1. Open the lock using the previous combination. …
2. Insert the reset tool in the hole on the side of the lock. …
3. Push the reset tool in and turn 90° in either direction. …
4. Set wheels to your new combination.
5. Turn and remove the reset tool. …
6. Record your combination in a safe place.

Also, How do you reset a 4 digit combination lock if you forgot the code?

If you forgot a bike lock combination or the digits to a padlock with a dial, you can try to reset it. Pull on the shackle until you see the wheels turn. When the wheel sticks or catches, move to the next wheel and continue through all the wheels.

Moreover, How do you reset a master lock without a key?

This lock is preset at the factory to operate at 0-0-0-0.

1. With dials at 0-0-0-0, pull out the shackle.
2. Turn shackle counterclockwise 90 degree (1/4 turn)
3. Continue pressing shackle down and turn another 90 degree (1/4 turn)
4. Set the dials to your own combination.

How do you reset a 4 digit master combination lock?

Steps

1. Open the lock using the old combination.
2. Insert the reset tool into the shackle hole.
3. Turn the reset tool so that the Master logo is facing you.
4. Rotate the dial clockwise 3 times to clear the old combination.
5. Enter your new combination.
6. Remove the reset tool to lock it.
7. Write down the combination in a safe place.

How do you change the combination on a 4 digit Master lock?

“Set-Your-Own” Combination Locks Instructions FAQ

1. Open the lock (preset at 0-0-0).
2. Turn shackle counterclockwise 180 degree and press it down. You must hold the shackle down while performing the next step.
3. Set the dials to your new combination.
4. Lift and return the shackle to the closed position.