Top 5 Common causes for a Ninja Blender not to be working
Table of Contents
READ ALSO
- Blender components are not placed in the proper order after assembly.
- The pitcher was not locked in to the correct position.
- The lid of the pitcher was not locked tightly in place.
- The blades are not turning properly.
- The power light on the blender is not lit.
Likewise, How do you fix a blender that won’t turn on?
If your blender won’t turn on at all, the issue could be a completely burned out motor. Replacing the motor is an advanced repair, make sure to unplug the blender before starting. To access the motor, flip over the base and unscrew the bottom cover. Unscrew and remove the inside cover, also known as a motor platform.
Also, Is there a reset button on a Ninja blender?
First, try unplugging the blender and trying another appliance on the outlet to see if there is power to the outlet. If not, try resetting the outlet by using a reset button (if there is one), or by resetting the breaker in your circuit breaker box.
Moreover, How long does a Ninja blender last?
With a one-year warranty, Ninja appliances are not guaranteed to last beyond 365 days after purchase with regular use. Some consumers even complain that their Nutri Ninja only lasted a few months with heavy use. However, with good care and taking advantage of the warranty if necessary, your Ninja can last years.
Why is my Ninja blender blinking white?
The most common reason your Ninja blender will blink at you is due to the lid not being on tightly. As we mentioned above, you’ll want to remove the lid and check for obstructions. Be sure the white arrows on the lid and handle align.
Why did my blender suddenly stopped working?
In the event that the unit loses power, it’s possible that the motor was overheated. In this case, the thermal fuse has activated and turned off the blender in order to cool itself down. Unplug the unit and wait 15 minutes. This should reset the fuse and be able to blend again.
Why does my blender keep stopping?
Combining smoothie ingredients in the wrong order can cause frozen fruit and ice to get caught in the blender’s blades. … Too many frozen ingredients are another reason the blender might be stalling; use a mix of fresh and frozen fruit to ensure a smoother blend.
How do you fix a dead blender?
Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.
Why does my Ninja blender smell like it’s burning?
If your blender is emitting a burnt or electrical smell from its motor, it can be an alarming sign. … Dull blades from blending lots of ice or other hard foods can also cause stress on the motor, sometimes resulting in a burning smell. Replacing the blade assembly is an easy repair you can complete yourself.
What does E01 mean on Ninja blender?
ERROR MESSAGES. “E01” or “E02” Remove and reinstall the pitcher. If that does not solve the issue, contact Customer Service at 1-877-646-5288.
How do you reset a ninja?
To reset your Ninja Bot back to a WHITE BELT:
- Press and hold the head button for 8 seconds. A beep will sound, keep holding the button.
- If held an additional 2 seconds (10 seconds total), Factory reset occurs. Eyes turn solid red and you will hear a beep.
- Turn your Ninja Bot OFF then ON again (this MUST be done).
Is a Ninja better than a blender?
These two blenders are nearly neck and neck in our tests. The Vitamix scores slightly higher for making soup, but Ninja rates a little better for ease of use. They’re tied in the icy drinks, ice crushing, and noise tests. … And it’ll turn out decent soups—as long as you don’t blend ingredients while they’re hot.
Is the Ninja blender worth it?
It’s versatile enough to handle a wide range of quick and simple tasks, so it’s absolutely worth your consideration. This thing is a beast when it comes to smoothies. It works better than some larger blenders and is super fast at pulverizing fruits and vegetables, even when they’re frozen.
Are Ninja blenders bad?
NINJA RECALL MODELS. Blenders, by their very nature, can be dangerous. … They feature sharp blades that can cause lacerations when the blender isn’t handled properly. But some blenders may be more dangerous than others.
Can a Ninja blender be repaired?
The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced for as long as you own the original unit. … SharkNinja reserves the right to replace the unit with one of equal or greater value.
Why my portable blender is not working?
The most common reasons a portable blender will not work are a lack of charge or an overload. … If your portable blender is charged, then you may have placed too much material inside of it for the motor and blades to function. Carefully remove some of it, and try again. In most cases, this will solve your issue.
Can a blender overheat?
From smoothies and sauces to facemasks and body scrubs, blenders see tons of action. Regardless of what gets diced up in your blender eventually, you may notice it start to overheat. Overheating can present itself in a few different ways, but the bottom line is that it’s not a good thing.
How do you fix a jammed hand blender?
Here are some steps to follow if the blade shaft gets stuck.
- Step 1 – Be Familiar with the Shaft Assembly. …
- Step 2 – Prepare the Shaft and Main Body for Clamping. …
- Step 3 – Remove the Shaft from Main Body. …
- Step 4 – Clean the Joints. …
- Step 5 – Lubricate the Joint.
How long do ninja blenders last?
With a one-year warranty, Ninja appliances are not guaranteed to last beyond 365 days after purchase with regular use. Some consumers even complain that their Nutri Ninja only lasted a few months with heavy use. However, with good care and taking advantage of the warranty if necessary, your Ninja can last years.
Is it safe to put frozen fruit in a blender?
While they’re delicious and easy to make, people sometimes put fully frozen fruits in the blender. This can result in lumpy smoothies and, in some cases, can cause the sharp blades to crack and break. Leave frozen fruits out in the fridge to thaw or put them in a Ziploc bag and thaw in a bowl of water before blending.
Can you just blend frozen fruit?
If you blend frozen fruit without liquid, then you’re going to end up with a slushy material, not a smoothie. … If you want to make a slushy or a frozen sorbet, then yes, don’t add liquid. But if you are looking to make a regular smoothie, then you need to add some liquid.
How long does a blender last?
Typically, Beautyblenders last anywhere from 3 to 6 months, depending on how well you take care of it.
Do Ninja blenders explode?
Much like the Nutri Ninja sold by Shark Ninja, the cause of these Nutribullets exploding is likely the heat and pressure inside the canister that builds up when the 600-watt motor is engaged. When the pressure becomes too intense, the canister explodes.
How do you fix a burnt out blender?
Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.
Is there a recall on Ninja blenders?
SharkNinja Ninja blenders recalled
SharkNinja has recalled 1.1 million blenders due to a laceration risk posed by the blender if a consumer pours the pitcher or inverts the pitcher after removing the lid while the loose stacked blade assembly is still inside the pitcher.
