If your blender won’t turn on at all, the issue could be a completely burned out motor. Replacing the motor is an advanced repair, make sure to unplug the blender before starting. To access the motor, flip over the base and unscrew the bottom cover. Unscrew and remove the inside cover, also known as a motor platform.
Table of Contents
READ ALSO
Likewise, How do you troubleshoot a ninja blender?
Top 5 Common causes for a Ninja Blender not to be working
- Blender components are not placed in the proper order after assembly.
- The pitcher was not locked in to the correct position.
- The lid of the pitcher was not locked tightly in place.
- The blades are not turning properly.
- The power light on the blender is not lit.
Also, Why did my blender suddenly stopped working?
In the event that the unit loses power, it’s possible that the motor was overheated. In this case, the thermal fuse has activated and turned off the blender in order to cool itself down. Unplug the unit and wait 15 minutes. This should reset the fuse and be able to blend again.
Moreover, Why is my Ninja not turning on?
If the power light on the blender isn’t on, then there’s a problem with the electrical cord or source. … The main culprits of a malfunctioning Ninja blender that won’t turn on include defective power source or supply cord and improperly locked lid.
How do you fix a burnt out blender?
Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.
Is there a reset button on a ninja blender?
First, try unplugging the blender and trying another appliance on the outlet to see if there is power to the outlet. If not, try resetting the outlet by using a reset button (if there is one), or by resetting the breaker in your circuit breaker box.
Why is my Ninja blender not spinning?
Most of the time when your blender is powered on and the blades will not rotate, it is because you have overfilled the container. Remove some of the food/liquid and try to power on your blender again.
Can a Ninja blender be repaired?
The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced for as long as you own the original unit. … SharkNinja reserves the right to replace the unit with one of equal or greater value.
Why does my blender keep stopping?
Combining smoothie ingredients in the wrong order can cause frozen fruit and ice to get caught in the blender’s blades. … Too many frozen ingredients are another reason the blender might be stalling; use a mix of fresh and frozen fruit to ensure a smoother blend.
How do you fix a jammed hand blender?
Here are some steps to follow if the blade shaft gets stuck.
- Step 1 – Be Familiar with the Shaft Assembly. …
- Step 2 – Prepare the Shaft and Main Body for Clamping. …
- Step 3 – Remove the Shaft from Main Body. …
- Step 4 – Clean the Joints. …
- Step 5 – Lubricate the Joint.
Can a blender overheat?
From smoothies and sauces to facemasks and body scrubs, blenders see tons of action. Regardless of what gets diced up in your blender eventually, you may notice it start to overheat. Overheating can present itself in a few different ways, but the bottom line is that it’s not a good thing.
What do you do when your Ninja blender won’t turn on?
First, try unplugging the blender and trying another appliance on the outlet to see if there is power to the outlet. If not, try resetting the outlet by using a reset button (if there is one), or by resetting the breaker in your circuit breaker box.
Can you reset Ninja blender?
Like most blenders, the Ninja brand blender does not have a reset button and cannot be reset with a button-pushing sequence. If you believe your issue stems from an internal electrical glitch, the owner’s manual states that you can always disconnect the Ninja from the power source.
Is it normal for my blender to smoke?
Blenders with heavy use will have worn out brushes over time. The brushes will arc, resulting in a burning smell and possibly some smoke. The carbon brushes are used in electric motors to transfer electricity to the armature inside the motor.
Why is my Ninja blender blinking white?
The most common reason your Ninja blender will blink at you is due to the lid not being on tightly. As we mentioned above, you’ll want to remove the lid and check for obstructions. Be sure the white arrows on the lid and handle align.
Why does my Ninja blender say error?
With your Nutri Ninja® cup there is a safety feature that after you run 3 consecutive times without removing the cup from the base the blender will shut off and you will have to unplug your unit and wait 15 minutes to be able to use it again.
How does the Ninja blender turn on?
How Do You Turn On A Nutri Ninja?
- Position the empty pitcher on the motor base such that the corners form a diamond.
- Twist the pitcher clockwise till you hear a click. …
- Place the stacked blades into the pitcher directly on top of the blade gear. …
- Place the pitcher lid on the top of the pitcher.
How do I fix my blender blade not spinning?
Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.
Do Ninja blenders have a lifetime warranty?
EuroPro Operating LLC (“EuroPro”) warrants that if anything ever happens to your NINJA, it will replace it. This warranty extends only to the original consumer purchaser and is not transferable. … In addition, proof of purchase must be demonstrated.
How do you fix a burnt blender?
Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.
Why does my Ninja Blender smell like it’s burning?
If your blender is emitting a burnt or electrical smell from its motor, it can be an alarming sign. … Dull blades from blending lots of ice or other hard foods can also cause stress on the motor, sometimes resulting in a burning smell. Replacing the blade assembly is an easy repair you can complete yourself.
Why is my Blendjet not working?
It either means it needs to be charged or that the base isn’t tight enough. First try making sure you have the base screwed on tight enough, if it still flashes, then charge it. If it still flashes after that, check the manual that came with it.
Is it safe to put frozen fruit in a blender?
While they’re delicious and easy to make, people sometimes put fully frozen fruits in the blender. This can result in lumpy smoothies and, in some cases, can cause the sharp blades to crack and break. Leave frozen fruits out in the fridge to thaw or put them in a Ziploc bag and thaw in a bowl of water before blending.
How long does a blender last?
Typically, Beautyblenders last anywhere from 3 to 6 months, depending on how well you take care of it.
