A dc error code on your Samsung front-load washer means the washer won’t spin because the load is unbalanced. Fixing a dc error code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.
Table of Contents
READ ALSO
Likewise, Why is my Samsung washer always unbalanced?
The drum is overloaded or underloaded. If you wash your laundry at a temperature of more than 60 degrees, some extra water enters the washer during the rinse cycle. This may lead to a slight imbalance. … If the bearings are worn or rusty or the shaft is bent, the vibration increases and the washer may not spin at all.
Also, How do I get my Samsung washer to spin only?
To run a Spin Only cycle on a model that does not have this option on the cycle selector dial, perform the following:
- Power the unit on.
- Press and hold the spin key for approximately 3 seconds. A chime will sound.
- Select the spin level, if desired.
- Press the Start/Pause button.
Moreover, What does CL mean on Samsung washer?
The Child lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be changed. [Activating/Deactivating] If you want to activate or deacivate the Child Lock function, press the Temp and Rinse buttons at the same time for 3 seconds. “Child Lock” will be lit when this feature is activated.
How do I rebalance my Samsung washer?
- 1 Tap Settings on your washing machines display.
- Tap Calibration.
- Tap Start. The washing machine door will lock and the drum will rotate clockwise and anticlockwise for several minutes. When your washing machine has finished calibrating, it will turn off automatically.
How do I get my washer to spin only?
- To perform a spin only cycle: Press the power button to turn the washer on. Press and hold the spin button for 3 seconds. …
- Yes, hold spin only at center bottom of key pad. Has asterisk next to it. …
- Press spécial care then spin only. …
- Spin towels. …
- Press on then special care then spin only. …
- Just put it on spin, and it will.
Why is my washer not spinning all the water out of my clothes?
Drain Hose Issues
The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. It could be clogged, kinked, or even positioned incorrectly if you had to remove the drain tube to make another repair already.
How do I get the CL off my Samsung washing machine?
The most common ways to activate and deactivate child lock are: press and hold the temp and spin/rinse buttons for three seconds.
How do you bypass the lid lock on a Samsung washer?
How to Bypass a Washing Machine Lid Lock
- Turn off the washer and unplug the appliance. …
- Locate the retaining tabs and/or screws that hold the top horizontal panel down. …
- Look for the lid lock switch on the underside of the top panel and where it fits into the appliance.
What does the red lock mean on Samsung washing machine?
If you see a key indicator rather than a lock, this means that the door is locked. This may be because the child lock is on but may also be because the cycle is not finished or the machine has detected an error.
Why does my washer always become unbalanced?
One or more of the suspension springs might be broken. The suspension springs help to absorb the movement of the washer tub. If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation. Inspect the suspension springs to determine if any of the springs are broken.
Where are the shipping bolts on a Samsung washer?
Your Samsung Front Load Washing Machine comes with shipping bolts inserted into the back of the machine to keep the tub secure during transportation.
Is there a reset button on Samsung washing machine?
To reset your Samsung washing machine you need to simply disconnect the washing machine from power for 5 to 10 minutes. … Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.
How do I get my GE washer to spin only?
To spin the clothes, you must select the “Spin Only” or “Drain and Spin” cycle then press “Start.” You may drain and spin a cycle during any wash cycle. While the washer is operating, turn the Cycle Selector knob to “Spin Only” or “Drain and Spin.” The washer will stop and reset the cycle to the new selection.
Does Spin Cycle drain water?
It removes the water from the tub during the spin cycle. The washer pump forces water from the bottom of the machine into the drain hose. The drain hose loops to the top of the machine, and then down to the drain, enabling the tub to fill. When the water reaches the bend in the hose, it goes out of the drain.
Why is my Samsung top load washer not spinning?
If your washer isn’t spinning properly , it could be because of an unbalanced load, which makes it harder for the drum to spin. An unblanced load also cause errors. “Ub” or “Ur” display is one of the sign that your washer is unbalanced. This may be because the washer is lopsided or because the load inside is uneven.
How do you get excess water out of clothes?
Roll the towel to squeeze more water out of the clothing.
Roll the towel over and onto the clothing. Gently press down on the towel roll to squeeze as much water as possible out of the garment. If the towel becomes soaked, unroll it. Roll the clothing up in a different towel and squeeze out the remaining water.
How do you manually unlock a Samsung front load washer?
The washing machine door will be locked when it detects water in the unit. Wait and see if it drains out by itself. When water is no longer in the washer, reset the washer by pressing the ON/OFF or START/PAUSE button. Then wait for a minute to pass, and you can then unlock the door.
How do I turn off child lock on Samsung?
To deactivate Child-Lock: Press and hold both the Rinse and Spin buttons simultaneously for 3 seconds again. If the Child-Lock function is deactivated, the Child-Lock icon is turned off.
How do you unlock a Samsung top loader?
Pressing the ON/OFF or START/PAUSE button will reset the washer if water is no longer in it. You can then open the door when you wait for a minute. To open/unlock the door, you’ll need to rain the water out of the washer.
How do you bypass the lock on a front load washer?
Wash Away!
- Let the machine cool down and the door may unlock naturally.
- Cut the color-coded wires and tape them off for added safety.
- Trick the solenoid with a small replacement magnet.
- Tilt the machine and stick your hand in to manually unlock a stuck door.
What are the symbols on my Samsung washing machine?
An icon displays on Samsung washing machine
- Garment + The t-shirt with a + icon indicates you can pause the cycle to add more clothing. …
- Child Lock. The smiley face icon indicates Child Lock is turned on. …
- Delay Start. …
- Door Lock. …
- Time Remaining. …
- Signal Off. …
- Pure Cycle or Self Clean. …
- Extra Rinse.
How do you bypass a washing machine door lock?
One of the main ways of bypassing a washing machine door lock is by disabling the safety circuit. It is good to note that the process involves cutting of electrical wires. Thus, you need to disconnect your machine from the main power supply. Additional, cutting the cord may void your warranty.
