In this particular case, error code F21 indicates an issue with your Maytag washing machine’s drain valve. When it takes eight or more minutes for a Maytag washing machine to drain, the device will tell its pipes to close, and you’ll be forced to troubleshoot.
Likewise, How do I clear the error code on my Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
Also, What does code F21 mean on Kenmore washer?
The F21 error code indicates a long drain. Here are some tips that should help you resolve this problem: Check your washer drain to make sure that it is draining properly. Check the drain hose for kinks and clogs. Make sure that it is installed properly per the instructions in your owner’s manual.
Moreover, What does F mean on Maytag washer?
Maytag F/02 – Drain Cycle Too Long
The manufacturer has assigned this error or fault code to indicate that the washing machine drain cycle is taking too long. After 8 minutes of drain time the error code is displayed. … If the error code returns, check to be sure the drain hose isn’t clogged or kinked.
What is wrong with my Maytag washer?
Some common Maytag front-load washer problems include not agitating or spinning, and not draining or filling with water. Perhaps your washing machine is vibrating during spin cycles or making noises during wash cycles. … Look, Maytag is a great brand, but if the washer isn’t working that doesn’t work for anybody.
What does F5 mean on a washer?
A temperature sensor resistance that is out of the normal range is detected by the Central Control Unit. A failed NTC temperature sensor is what causes the F5 error.
What does F5 mean on washing machine?
The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range.
Why is my Maytag washer not working?
When your washer isn’t working right, the solution may be as simple as switching up detergents, tightening a hose or leveling the appliance. … If you have a front load washer, a dirty drain pump filter can be a common cause of the issues listed below, like problems draining, spinning and odor.
How do you clear F21 code on Kenmore washer?
This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset. If that is without result check the drain hose for kinks or if it is clogged. After that check the electrical connections to the pump and ensure the pump is running.
How long does Sud error last?
If you have noticed a SUD code during a washing cycle, it means the suds have exceeded the drum’s usual level. More specifically, this error means that the washing machine is reducing foaming. It has just stopped for 5-10 minutes to allow the suds to dissipate and the washing cycle to go on.
How do I clear the error code on my Kenmore washer?
You will need to remove the power supply to the washer to reset the code.
- Look for the “Pause/Cancel” button on the washer control panel. …
- Press the “Pause/Cancel” button twice to cancel the wash cycle. …
- Connect the water supply hoses back to the washer and turn on the water spigots.
What is F5 error code?
An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.
Where is the reset button on Maytag washer?
How to Reset a Maytag Washer
- Press the “Power/Cancel” button.
- Push the appropriate button to choose a new cycle.
- Press “Start/Pause.” You have now reset your Maytag washer.
How do you fix a Maytag washer that won’t drain?
If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.
Why is my Maytag washer not draining?
A clogged pump filter could also be responsible for a Maytag washer not draining. As the wash water drains, the filter screens out debris to prevent it from clogging the drain pump. If the filter becomes clogged, water can’t flow to the drain pump and exit the washer.
How do I fix F5 error on washing machine?
Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute.
Why does my Whirlpool washer say E3 and F5?
The F5 E3 alert indicates there is issue with the lid lock. … Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
Why is my washer not working?
1 Be sure the machine is plugged in and turned on. If necessary, check the receptacle it’s plugged into for power, using a working lamp, appliance, or voltage tester. Be sure the washer lid is closed completely. 2 If the receptacle seems dead, check the circuit breaker or the fuse that serves it.
Do washing machines have a reset button?
Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. … Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.
Why is my front-load washer not spinning?
Front-load washer tubs spin thanks to a drive belt that runs off of the motor. A loose, frayed, or torn belt could be why your washer won’t spin. Overloading your washing machine can cause the belt to loosen or become worn out. Inspect the drive belt closely.
What does ND mean on Kenmore washing machine?
No Drain Condition (Nd)
If your washer is beeping, and the display is flashing “Nd”, your machine is showing a no drain condition which is usually related to a backed up drain hose or a clogged debris filter.
How do I reset my Kenmore he2t washer?
To clear and restart the control follow the these steps: * Unplug or turn the circuit breaker off for 30 seconds. * Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet. * Press the Pause/Cancel/Stop button twice to clear the “PF” in the display.
What does F28 mean on a Kenmore washer?
The F28 error code indicates a communication problem between the central control and the motor control. This simply means the control boards are not talking to each other. This can be a difficult and frustrating problem to diagnose even for a technician.