The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.
Table of Contents
READ ALSO
Likewise, What does E2 and F6 mean on Maytag washer?
The F6 E2 alert indicates there is issue with the appliance control unit, user interface or associated wiring. Unplug the washer, wait five minutes, then plug back in.
Also, How do I fix E2 error on my Whirlpool washer?
F5 E2 Error Code
- Power unit down by turning off the circuit breaker or unplugging for one (1) minute.
- Power unit up by reconnecting power.
- Open and close the door.
- Restart a new cycle.
- Monitor the washer for one (1) minute to ensure the error code does not display again.
Moreover, What does F5 and E3 mean on a washing machine?
The F5 E3 alert indicates there is issue with the lid lock. … Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
What does E2 mean on a Kenmore washer?
Dryers , Kenmore , Washers. 1 Answer from this member: The E2 error message indicates the control has detected a shorted thermistor. Most likely replacing the thermistor will fix this problem.
Is there a reset button on a Maytag washer?
Press “Start/Pause.” You have now reset your Maytag washer.
What do you do when your washing machine won’t turn on?
How to Fix a Washing Machine That Won’t Start
- Activate the power button.
- Test the outlet.
- Reset outlet if necessary.
- Make sure the power cord is plugged in.
- Check if fuses are blown or the circuit breaker is thrown.
- See if Delay Start has been pushed.
- See if Control Lock has been activated.
Why does my Maytag washer not start?
If your Maytag washing machine isn’t starting, verify that the power cord is connected to a live outlet. Test the outlet with another three-prong appliance. … Select a wash setting and pull out the knob to start the cycle. If it still won’t start, reset the circuit breaker or change out the fuses if they are blown.
Do Whirlpool washers do E2?
The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way. CLICK HERE to review a video for more information on the F5 E2 code.
What does E2 means on AC?
“E2” – Low Pressure: The pressure of the compressor is too low.
How do I reset my Whirlpool front load washer?
The first way you can reset whirlpool washer top load is by unplugging it for about 2 minutes then plug it back in and wait about 30 seconds before starting the washer again. This performs a hard reset on the machine and it will start over after you reconnect it again.
What does E3 mean on my washing machine?
The E3 error in Samsung washers means a drum overflow with water. The water level sensor sends a signal indicating that there is too much water in the drum. … The E3 error code indicates overfilling with water. That’s what this error, displayed on the washing machine, means.
How do I fix F5 E3 error on Maytag washer?
F5 E3 Error Code
- Power unit down by turning off the circuit breaker or unplugging for one (1) minute.
- Power unit up by reconnecting power.
- Restart a new cycle.
- Monitor the washer for one (1) minute to ensure the error code does not display again.
What does F5 mean on my washing machine?
The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range.
What does E2 and F2 mean on a dishwasher?
Maytag Dishwasher F2 E2 Error Code Meaning
If this code appears on your dishwasher display, it means that there is a communication failure between the electronic control and the touchpad.
What does E2 mean on a dishwasher?
E2 – Abnormally long drain time. Check to make sure that the drain line is not obstructed or bent in a way that restricts water flow. Make sure the drain line is routed below the height of the dishwasher and that it has not been extended. This will inhibit the ability of the drain function to operate properly.
What does E2 mean on a dryer?
The Whirlpool Duet Dryer Error E2 means the control has detected that the thermistor is shorted. This error can be a wiring issue from the control to the thermistor or a bad thermistor. In some cases it can be a bad control reporting false errors but this is not common.
How do you bypass the clean cycle on a Maytag washer?
Hello Sandy, Press and hold the “Spin” and “Soil” button simultaneously for 10 seconds. A countdown will be displayed on the console. Once the countdown has completed the unit will have successfully reset.
How do I reset my Maytag mvwx655dw1 washer?
Be sure the washer is in standby mode (plugged in with all indicators off). Perform the following sequence of movement using the cycle selector knob. NOTE: AFTER RESET, sequence “A” through “E” must be completed within 6 seconds. RESET – Rotate cycle selector knob counterclockwise one or more clicks to clear sequence.
How do you manually unlock a front load washer?
Possible Solutions
- Turn off and unplug the washer/dryer.
- Close the water faucet.
- Wait until the drum has stopped rotating – never open the door while the drum is in motion.
- Wait until water and laundry have cooled down when washing with high temperatures.
Why is my washer just humming?
Drive motor: If the washing machine does not drain water, spin, or agitate, and just makes a humming sound accompanied with a slight electrical burning smell, then you are likely dealing with a failing drive motor. … Washing machine pump: The gentle humming noise may be caused by a jammed pump trying to turn.
Is there a way to reset a Whirlpool washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
Why did my washer just stopped working?
There are a number of possible causes for your washing machine not working as it should. … Some of the most common faults that will make your washer stop mid cycle include thermostat failure, problems filling up with water for the rinse cycle, or even pump problems that prevent your washer from draining.
