How do you run a diagnostic on a Fisher Paykel dishwasher?

Diagnostic Mode. With Power off, press/hold Keylock, then press Start/Pause at the same time for 5 seconds. Release the buttons when it powers-on. Press Power once.

Likewise, How do I fix A6 error on Fisher and Paykel dishwasher?

foaming may also trigger an A6 fault.

1. Open the drawer and check the spray arm.
2. If the spray arm has loosened or come off its mounting, re-fit it. …
3. Press ► once to stop the beeping, and then again to clear the fault.
4. Press. …
5. If the fault code persists, check the filter on the inlet hose is not blocked, and clear if needed.

Also, Why is my Fisher and Paykel dishwasher beeping?

The drainage hose may be blocked or kinked, or the connection to drainage pipe may be blocked. Ensure the drainage hose and connection to pipes are not blocked. Press ► once to stop the beeping, and then again to clear the fault. / ► to resume the wash program.

Moreover, How do I fix E4 error on dishwasher?

Error message E4 in integrated compact dishwasher indicates failure of communication between main PCB with display PCB.
…
Resolution:

1. Make sure that the drain hose is correctly connected.
2. Make sure that the filters in the appliance are clean.
3. Make sure that the kitchen sink drains correctly.

How do I fix the f2 on my Fisher and Paykel dishwasher?

Reset Procedures for the Fisher & Paykel Dishwasher

Press the power button to turn off power to the Fisher & Paykel dishwasher. Wait a few minutes and then press the power button to restore power. Turn off and unplug the dishwasher if the issue remains.

How do I get my DishDrawer to stop beeping?

Sometimes, the beeping error on Fisher and Paykel DishDrawer Dishwasher is just abnormal, and may be fixed by simply resetting it. To do so, turn it OFF and after 10-15 minutes, turn it ON it.

What does E9 mean on Fisher and Paykel dishwasher?

Answers : The fault E9 means the controller has a problem. Obviously it is not a complete fault as you are still getting the fault codes. Some key circuit in the controller has become faulty and this prevents dishwasher from working. Usually the controller needs to be replaced.

What is the red light on my Fisher and Paykel dishwasher?

The red ECO light will indicate the feature is on. If your dishes are heavily soiled or you require enhanced dry performance, we do not recommend ECO programmes. If the DishDrawer® is operating and a power failure occurs, it will stop.

Why does my dishwasher stop mid cycle and beep?

If your dishwasher keeps beeping and stopping, the odds are that the door latch is loose. The reason why the dishwasher is stopping mid cycle is because the sensor on the door latch is shorted or is obscured. It could also mean that the door latch is simply broken.

Why does my dishwasher keep saying E4?

E4 – Overflow sensor. Water pressure may be set to high. The inlet hose may not be properly connected. There is a malfunction or problem with the drain check for an obstruction.

How do I fix E4 error?

E4 indicates due to leak anti flood device in the base of appliance is activated. You will have to unplug the dishwasher and pull it out. Now tip it backwards by around 45 degrees so excess water drains off completely. Now check to make sure nothing is clogged and drain hose is clean.

How do you unblock a dishwasher?

Blocked Drain

1. Turn off the water and electrical source to the dishwasher. …
2. Remove the front kick plate. …
3. Slide a shallow drip pan under the interior of the dishwasher. …
4. Locate and remove the drain hose. …
5. Run water through the hose. …
6. Replace the drainage hose and turn the water and electricity back on.

What does F9 mean on a dishwasher?

A water pressure sensor is related to the F9 fault code on Glow-Worm boilers.

What does E2 mean on a dishwasher?

E2 – Abnormally long drain time. Check to make sure that the drain line is not obstructed or bent in a way that restricts water flow. Make sure the drain line is routed below the height of the dishwasher and that it has not been extended. This will inhibit the ability of the drain function to operate properly.

What does F2 mean on a dishwasher?

If your dishwasher doesn’t drain properly, you’ll see standing water on the bottom of the dishwasher when the cycle is complete and the error code F2 may be displayed.

Why is my Elba dishwasher beeping?

Blinking lights and beeping sounds can be caused from a power surge. So its beeping and flashing once per second correct this beeping and flashing is an error code that your unit is giving blinking lights or beeping sounds may indicate a problem with the dishwasher caused by power surges.

When should I use rinse aid?

The main reason to use a rinse aid is to get rid of water spots, which can be particularly problematic if you have hard water. You probably have hard water if there is a white residue around your faucets or drains, soaps and shampoos don’t lather easily, or you see a ring around the bathtub.

How do I fix e5 error on my dishwasher?

1. Switch the power off and restart the dishwasher

1. To do this you need to press the on/off button on the machine.
2. When you have clicked the button wait a few minutes.
3. Restart the dishwasher using the same button.

How do I fix F30 error on Fisher and Paykel?

Sometimes if a wrong detergent is used the water in the dishwasher can foam up and leak under the dishwasher causing an error F30. Disconnect the dishwasher from the power, tip it on it’s back, take off the bottom cover of the dishwasher and look for cracked hoses, loose clamps or faulty and leaking components.

Where is the flood switch on a Fisher and Paykel dishwasher?

The anti flood switch is in the bottom of the bas of the dishwasher. If its activated try and pull the dishwasher out and tip it 45 degs backwards and the water should drain out from the base and that way the flood switch will reset itself.

How long does a dishwasher last?

The average lifespan of a modern dishwasher is approximately 6-10 years. Over time, major components like the motor or pump may wear out, and out-of-warranty repairs can easily run $400-$600 or more once parts, labor and trip costs are calculated.

Why does my dishwasher shut off after a few minutes?

If your dishwasher shuts off after a few minutes, check to make sure the dishwasher door was not opened suddenly during the wash cycle and then not closed completely to restart the cycle. The dishwasher will not run if the door is open, so push the door closed firmly.

Why would a dishwasher suddenly stop working?

A dishwasher that won’t stop filling may have a faulty float switch, a timer stuck on fill, or a water inlet valve that is stuck open. … If your door isn’t properly closed, the dishwasher will not start. If your latch is fine, check the timer or electronic control, especially if your drain pump motor isn’t starting up.

How do you reset a dishwasher?

Can you reset your dishwasher? Yes, you can reset your dishwasher by pressing the Start/Reset button on the appliance and waiting a few minutes. If your dishwasher still doesn’t start, you may need to reboot the entire system by turning off power to the appliance at the house circuit breaker or fuse box.