Why is my fridge not cold enough?

Problem: Fridge Not Cooling

Be sure the fridge is plugged in and getting power. … Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan).

Likewise, What would cause a refrigerator to stop getting cold?

As the refrigerant travels through the coils at a high pressure, it cools and turns back into a liquid. Clogged condenser coils can produce poor circulation of air, restricting your fridge’s ability to keep cool.

Also, What causes a Whirlpool refrigerator to stop cooling?

Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.

Moreover, What to do if refrigerator is not cooling?

Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.

1. Make sure your fridge is getting power.
2. Check the refrigerator’s thermostat.
3. Test the seals on your fridge doors.
4. Determine whether the refrigerator is level.
5. Clean the condenser coils.

Why would my refrigerator stop cooling and then start working again?

If the thermostat is adjusted incorrectly, the fridge will turn off and turn on again when the temperature increases. The compressors are responsible for providing power for the cooling process. In this case, it is suggested that you lower the thermostat setting to ensure the compressor keeps working properly.

Why is my Whirlpool fridge not cooling?

Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.

How do you fix a Whirlpool refrigerator that is not cooling?

A Whirlpool refrigerator not cooling may have a dirty or damaged gasket that leaks cold air, warming the refrigerator’s interior. Inspect the door gasket for damage, using a cloth dipped in warm water to clean away any dirt and debris. If the gasket is ripped or broken it will need to be professionally replaced.

What to do if fridge is not cooling?

Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.

1. Make sure your fridge is getting power.
2. Check the refrigerator’s thermostat.
3. Test the seals on your fridge doors.
4. Determine whether the refrigerator is level.
5. Clean the condenser coils.

What do I do if my Whirlpool refrigerator is not cooling?

Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.

Is there a reset button on a Whirlpool refrigerator?

Press the door switches and the refrigerator temperature button three times within 10 seconds. After releasing the switches, there should be a letter “S” display in the freezer section and an “E” in the refrigerator’s display.

What is the first thing to check when a refrigerator stops working?

The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.

Why is my fridge warm?

Your refrigerator stays at the proper temperature thanks to cold air that’s consistently circulated through the appliance. If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm.

How do I run a diagnostic on my Whirlpool refrigerator?

Starting Diagnostics

To start with we need to start the refrigerator’s diagnostic mode. To do this open the refrigerator door and press one or both door switches, depending on your refrigerator type. Next press the refrigerator temperature (+) button three times in ten seconds and release the light switch or switches.

How do I reset my Whirlpool refrigerator compressor?

4 steps to reset a refrigerator compressor

1. Unplug your refrigerator. …
2. Turn off the refrigerator and freezer from the control panel. …
3. Reset your freezer and fridge temperature settings. …
4. Wait for the refrigerator temperature to stabilize.

Does a Whirlpool refrigerator have a reset button?

Whirlpool refrigerator control panel reset is recommended if the refrigerator is beeping and not functioning properly. When the Whirlpool refrigerator reset button is not dealt with, it may cause more issues in the future.

Why has my fridge gone warm?

Refrigerator Is Too Full

Your refrigerator stays at the proper temperature thanks to cold air that’s consistently circulated through the appliance. If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm.

Why is my side by side refrigerator not cooling?

If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. The condenser fan motor draws air over the condenser coils to cool them. The condenser fan motor is located underneath the refrigerator near the back.

How do I reset the control panel on my Whirlpool refrigerator?

Reset power to the product:

1. Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.
2. Power unit up by turning on the circuit breaker(s) or plugging the product back in.
3. Ensure the cooling function is turned on.
4. Test the control panel functionality.

How do I know if my fridge is cooling?

Check for power lights on the water or ice dispenser, if the refrigerator is so equipped. Open the doors and check for lights inside. Listen for sounds of the fan running. Adjust the thermostat inside if there is power, but the refrigerator does not seem cold enough.

Why is my refrigerator not kicking on?

Refrigerator: Not running. If the refrigerator has electrical power—the inside light turns on, but the compressor won’t run—possible causes include a control board failure, a wiring problem or a failed compressor. A bad compressor start relay will also prevent the compressor from running.

What is the best temp for a refrigerator?

Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C). Check temperatures periodically. Appliance thermometers are the best way of knowing these temperatures and are generally inexpensive.

What happens when refrigerator condenser fan fails?

If your condenser fan stops, the temperature of the refrigerant will rise and the compressor may overheat. … The fan runs whenever the compressor runs, and it draws cool room air through the front grille, and circulates it through the condenser coils, over the compressor, and back out the front grille into the room.

How do I know if my fridge is cold enough?

To check the temperature of a refrigerator, it’s best to use food or liquid that has been in the compartment for at least 24 hours. The most common practice is to place a glass of water in the refrigerator (but not in the door) and let it sit for a day. Then place the thermometer in the glass to get a reading.