How do you troubleshoot a Maytag refrigerator?

1. The Refrigerator isn’t cooling or is too warm

1. Adjust the temperature. …
2. Check the settings. …
3. Check if vents are obstructed. …
4. Make sure the icemaker is turned on. …
5. Check if the water line is kinked. …
6. Make sure water shut-off valves are fully open. …
7. Make sure the door is sealed properly. …
8. Wipe down the door seal gasket.

Likewise, How do I reset the control panel on my Whirlpool refrigerator?

Reset power to the product:

1. Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes.
2. Power unit up by turning on the circuit breaker(s) or plugging the product back in.
3. Ensure the cooling function is turned on.
4. Test the control panel functionality.

Also, What causes a Maytag refrigerator to stop cooling?

If the defrost heater assembly is defective, frost will continue to accumulate on the evaporator coils, and the coils will become plugged with frost. If the evaporator coils are frosted over, the airflow through the coils will be restricted, causing the refrigerator not to cool.

Moreover, Why does my Maytag refrigerator freeze up?

The door gasket prevents air from leaking into or out of the freezer. … When this humid air passes over the cold evaporator coils, it condenses and freezes on the coils. If humid air is continually leaking into the freezer, the evaporator coils ice over too quickly, and the defrost cycle isn’t able to keep up.

Why does my Maytag fridge freeze everything?

If vents are blocked, airflow will decrease. Temperature and moisture issues may arise due to blocked vents. Items placed directly in the air flow from the freezer compartment to the refrigerator compartment may freeze.

Does a Whirlpool refrigerator have a reset button?

Whirlpool refrigerator control panel reset is recommended if the refrigerator is beeping and not functioning properly. When the Whirlpool refrigerator reset button is not dealt with, it may cause more issues in the future.

How do I reset my freezer compressor?

4 steps to reset a refrigerator compressor

1. Unplug your refrigerator. …
2. Turn off the refrigerator and freezer from the control panel. …
3. Reset your freezer and fridge temperature settings. …
4. Wait for the refrigerator temperature to stabilize.

How do you fix a refrigerator that is not cooling?

Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.

1. Make sure your fridge is getting power.
2. Check the refrigerator’s thermostat.
3. Test the seals on your fridge doors.
4. Determine whether the refrigerator is level.
5. Clean the condenser coils.

Why is my fridge compressor not working?

If the start capacitor is defective then the compressor may not start. Check for signs of overheating or arcing and replace if necessary. If the overload, start relay and capacitor check ok, then you may have a defective compressor which should be checked by a qualified technician.

How do I adjust the temperature on my Maytag refrigerator?

If the dial is numbered 1 to 5 set it on 3, if the dial is numbered 1 to 9, then set at 4. USUALLY the higher the number on the temp control dial, the colder the temperature your refrigerator will get. If your drinks and food are not as cold as you like, set the temperature dial up one number higher.

Why is milk freezing in refrigerator?

Milk is a dairy product and requires refrigeration at or below 40 degrees Fahrenheit. The colder milk is kept, the longer it will keep without spoiling. Milk freezes in the refrigerator when the temperature is set too low or the controls are malfunctioning.

What cause the refrigerator to freeze?

1 – The temperature for the refrigerator has been set TOO LOW or Set warmer. Most common reason. 2 – If the coils on your fridge are dirty or dusty, then the compressor needs to work harder and longer to keep the freezer temperature at freezing temperature. … 3 – There is a gasket on your freezer door.

What temperature should my Maytag refrigerator be set at?

Your refrigerator temperature should stay between 32ºF – 40ºF (0ºC – 4.4ºC), with 37ºF being the ideal spot for most foods. Also take into consideration where you’re placing items, since there are certain compartments that will be cooler than others.

How do you adjust the temperature on a Maytag refrigerator?

If the dial is numbered 1 to 5 set it on 3, if the dial is numbered 1 to 9, then set at 4. USUALLY the higher the number on the temp control dial, the colder the temperature your refrigerator will get. If your drinks and food are not as cold as you like, set the temperature dial up one number higher.

Can you reset a refrigerator by unplugging it?

Unplug the appliance from the wall socket for 30-45 minutes, then plug it back in. This will reset the device and in some cases it may be enough to completely fix the problem. If a hard reset did not solve the problem, measure the fluid temperature.

How do I run a diagnostic on my Whirlpool refrigerator?

Starting Diagnostics

To start with we need to start the refrigerator’s diagnostic mode. To do this open the refrigerator door and press one or both door switches, depending on your refrigerator type. Next press the refrigerator temperature (+) button three times in ten seconds and release the light switch or switches.

Why has my Whirlpool fridge stopped working?

Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.

Do fridges have a reset button?

There is no reset button on a refrigerator,but there are many things that can keep it from cooling. … One of the signs that a compressor is failing is that it runs continuously without the refrigerator and freezer compartments reaching their proper operating temperatures.

Why has my freezer suddenly stopped working?

Causes: If your freezer won’t freeze, most likely the condenser coils are dirty which reduces the overall cooling capacity of the freezer. Evaporator fan motor is malfunctioning, and since it’s in charge of circulating the air throughout the freezer, this will need to be resolved, pronto.

What is the first thing to check when a refrigerator stops working?

The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.

What can cause a fridge to stop cooling?

Here are five other common reasons why your fridge may not be cooling, and how to address them.

• Condenser coils are dusty. …
• The condenser fan is broken. …
• The evaporator fan is broken. …
• Evaporator coils are covered in frost. …
• Air inlet damper is broken.

Why is my refrigerator not coming on?

When your fridge won’t start and even the fans are not running, it could be due to a problem in the cold control, a switch to send electricity to the fans and compressor that’s triggered by temperature change. … If that does not happen, you can replace the temperature control.

What is the coldest setting on a freezer 1 or 7?

Your freezer will automatically maintain the temperature level you select. The temperature control dial has 7 settings, plus OFF. “1” is the warmest, “7” is the coldest, and turning the temperature dial to OFF shuts down the compressor.

How do I make my Maytag freezer colder?

If you need to adjust the temperature, wait at least 24 hours between adjustments and then recheck the temperature. To make the Freezer colder, adjust the control to the next higher setting. To make the Freezer less cold, adjust the control to the next lower setting.

What is the normal setting for a freezer?

Keep your appliances at the proper temperatures.

The freezer temperature should be 0° F (-18° C). Check temperatures periodically. Appliance thermometers are the best way of knowing these temperatures and are generally inexpensive.