If you’re still seeing the error message, try resetting your receiver:
- Unplug your receiver’s power cord from the electrical outlet.
- Wait for 15 seconds then plug it back in.
- Press the Power button on the front panel of your receiver and let it reboot.
- Refresh your service again, if necessary.
Likewise, How do I reboot my DIRECTV receiver?
Unplug your receiver
Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.
Also, Why do I keep losing my satellite signal?
This issue is usually a result of the satellite dish being in a slightly wrong position, damaged or malfunctioning equipment, severe weather, or something blocking the dish’s view of the sky. Your signal strength can affect the delivery of your live programming, though with a DVR you can still access recorded content.
Moreover, Why can’t I get a signal on my satellite dish?
Check all the cables between your TV equipment and satellite dish are connected securely. Try disconnecting and reconnecting the cables as this often works. While doing so, check none are damaged or wet. Unplug your receiver from the mains and leave for 10 minutes.
How do I get signal on my directv satellite?
To access the Signal Meters menu:
- Press the menu button on your remote.
- Select Settings and Help on the left hand menu.
- Select Settings.
- Select Satellite on the left hand menu.
- Select View Signal Strength on the bottom right-hand screen (scroll to it using the arrows on your remote).
Why is my DIRECTV receiver not turning on?
If your receiver still doesn’t turn on, check your electrical outlet. Unplug your receiver and plug in another appliance that works (for example, a lamp). … If your appliance doesn’t turn on, try resetting the outlet. You can reset the circuit breaker or press the reset button if your outlet has one (see image).
How do I reset my DIRECTV remote control?
To reset DIRECTV remotes to their default factory settings, press and hold the MUTE and SELECT buttons until the remote’s light flashes three times. Then, enter 981 and press SELECT. The remote will flash four times to let you know it has been reset.
What does 771 signal loss mean on Direct TV?
If you see error code 771, it means your DIRECTV receiver is having trouble communicating with your satellite dish.
Does a dirty satellite dish affect reception?
dirty dish may boost curb appeal, but it will likely have little impact on your signal quality. Snow and ice accumulations are another story, however, and may require more attention.
How do I get my satellite signal back?
Unplug the receiver from your electrical power outlet. Leave it unplugged for 30 seconds and plug it back in. Allow the receiver to restart and re-acquire the signal.
How do I test my satellite signal?
How to Test Satellite TV Signal Strength
- Ensure the satellite dish is connected to the included satellite receiver box. …
- Connect the satellite receiver box to your television. …
- Ensure that both the satellite receiver and television are powered on. …
- Select the “Signal Meter Screen” option from the receiver menu.
Why does my DirecTV keep losing signal?
A phenomenon called “rain fade” is one common cause of DirecTV signal loss. Rain fade happens when atmospheric conditions disrupt communication between DirecTV’s broadcasting network and your home receiver. … Naturally, rain fade affects some regions of the country more than others.
What DirecTV satellite do I point to?
In general, start with a southern-pointing direction before testing. The Dish satellites are aligned to the south and will calibrate more easily when pointed in that direction.
Why does my DirecTV say searching for satellite signal?
If the screen displays some other message such as “no signal” or “retrieving signal” your television is likely on the incorrect input or channel. Believe it or not, over half of the calls I took for “searching for satellite signal” was due to incorrect input channels or the receiver being turned off or unplugged.
Will DIRECTV replace a bad receiver?
If you get a refurbished box, this doesn’t automatically mean it’s bad. In fact most refurbished hardware from DIRECTV lives long and happy lives after being refurbished. … At any rate it’s going to be less than $20 to replace a broken receiver at any point in its life, due to the lease structure DIRECTV employs.
How do I reconnect my DIRECTV Genie Mini?
Pair the Wireless Genie Mini with your Genie HD DVR
- Press MENU on your Genie remote.
- Select Settings > Whole-Home > Manage Client > Add Clients.
- Write down the PIN you see on the screen. …
- Go back to the TV where you connected the Wireless Genie Mini.
- Use the remote to select Continue and enter the PIN when prompted.
Why is my DIRECTV box blinking orange?
If you are using DirecTV Genie Mini wireless and facing a flashing orange light on it, this means your wireless video bridge is not connected with the device. To make it workable, reset the wireless video bridge, and reboot the DirecTV device. After resetting, you will have an intense blue light on your device.
How do I reconnect my DirecTV remote to my box?
- Press Menu on your DIRECTV remote control.
- From the on-screen menu, select Parental Favs & Setup> System Setup> Remote Control or Remote Control> Remote Program.
- Select the device (DVD / Blu-ray player, DVR, game console, soundbar, TV, etc.) …
- Follow the instructions on the screen to complete the process.
Why won’t my directv remote change the channel?
If your remote is not responding, changing channels or adjusting the volume, make sure you have direct line of sight to the receiver.. Next, make sure your remote is set to control your DIRECTV receiver: At the top of the remote, slide the mode switch all the way to the left to the DIRECTV symbol.
Why is my TV not responding to the remote?
A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.
Why is my DirecTV satellite not working?
Locate your Access Card behind a small front panel on your DirecTV receiver/box. Remove then re-insert your access card and wait 30 seconds. If this fixes the problem, you most likely still have an issue either with this satellite dish or the cables that run from the dish to your receiver. … Check your cables.
What’s wrong with DirecTV satellite?
The broadcaster has told the FCC that the satellite has a major battery thermal problem with its on-board satellite. The filing was made on January 19th with the satellite’s manufacturer Boeing saying that the batteries damaged cells cannot be isolated and may burst if a recharge is attempted.
Can a satellite dish stop working?
Whilst a satellite dish will be fixed in the correct alignment when installed, if the dish shifts over time or shifts due to an external force such as extreme wind, or a falling branch, this would cause it to stop working.
Will a rusty satellite dish still work?
If for whatever reason the round part of the satellite dish is misshapen or bent or very rusty. This can cause the satellite signals to bounce off at different angles than they otherwise would and not be received by the LNB as they should be which can cause poor satellite reception.
Can I spray silicone on my satellite dish?
Extensive testing has shown that dish covers are ineffective and might cause problems with signal reception. DO NOT spray silicone, PAM or any slippery oily coating on your DIRECTV Dish. The chemicals in these substances can damage the surface.