The Whirlpool washer error code F21 means the washing machine has a “water draining issue”, meaning the drain pump itself, or the drain hose is clogged and the washer is having problems draining the water out. In other words, the washer is taking too long to drain the water out of the tub.
Table of Contents
READ ALSO
Likewise, How do I fix error code F21 on Maytag?
Problem with the overflow contact.
- Disconnect power to the washer.
- Turn off both hot and cold water faucets.
- Make sure the drain hose is free from kinks and obstructions.
- Clean the drain pump filter.
- Plugin the washer.
- Try to restart the machine.
Also, How do I fix error code F21 on Kenmore?
This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset. If that is without result check the drain hose for kinks or if it is clogged. After that check the electrical connections to the pump and ensure the pump is running.
Moreover, What does F21 mean on a Maytag 3000 washer?
In this particular case, error code F21 indicates an issue with your Maytag washing machine’s drain valve. When it takes eight or more minutes for a Maytag washing machine to drain, the device will tell its pipes to close, and you’ll be forced to troubleshoot.
Why is my washer showing F?
The F indicates that the washer control detected a component problem. … If the F code was caused by excessive suds preventing the washer from draining, you may be able to shut the door and run a drain/spin cycle to remove the water from the washer.
How do I clear the error code on my Maytag front load washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do I reset my Maytag washer?
How to Reset a Maytag Washer
- Press the “Power/Cancel” button.
- Push the appropriate button to choose a new cycle.
- Press “Start/Pause.” You have now reset your Maytag washer.
What causes washer not to drain?
There are a few possibilities why your washing machine won’t drain. … Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.
How do I fix my Samsung Sud error?
How to fix the error
- Wait for a little for the suds to dissipate. …
- Clean the drain filter upon completing the wash cycle;
- Remove excess powder by running the washing machine without clothes and setting a long wash cycle and high temperature;
- Change the detergent if you notice a lot of suds.
How do you remove the bottom panel on a Kenmore washer?
How to Remove Panels on a Kenmore Laundry Center
- Unplug the Kenmore laundry center power cord from the wall outlet. …
- Pull the bottom of the front panel out slightly and pull down to disengage the top clips. …
- Remove the screws under the front corners of the washer top with a nut driver.
How do I clear the error code on my Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does F mean on Maytag washer?
Maytag F/02 – Drain Cycle Too Long
The manufacturer has assigned this error or fault code to indicate that the washing machine drain cycle is taking too long. After 8 minutes of drain time the error code is displayed. … If the error code returns, check to be sure the drain hose isn’t clogged or kinked.
What does F code mean?
FCODE
| Acronym | Definition |
|---|---|
| FCODE | Forth Code (electrical engineering) |
What does DL on a washer mean?
: DL is a failure of the door to lock. The door must lock before any cycle begins. This can be caused by any of the following conditions: The door lid is not completely closed due to an interference. Wash media buildup is preventing the lock bolt from extending.
What does f51 error code mean?
Why does error f51 appear? This is a signal of the unsatisfactory operation of the engine rotor sensor responsible for the movement of the drum. It shows that some failure has occurred, wherefore the Rotor Position Sensor (RPS) sends incorrect data to the control board.
How do I clear my F21 code on Kenmore?
This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset. If that is without result check the drain hose for kinks or if it is clogged. After that check the electrical connections to the pump and ensure the pump is running.
What is wrong with my Maytag washer?
Some common Maytag front-load washer problems include not agitating or spinning, and not draining or filling with water. Perhaps your washing machine is vibrating during spin cycles or making noises during wash cycles. … Look, Maytag is a great brand, but if the washer isn’t working that doesn’t work for anybody.
How do you fix a Maytag washer that won’t drain?
If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.
How do you reset a front load washer?
How to reset the washing machine:
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
Why is my washer stuck on sensing?
When Kenmore HE Washer is stuck on Sensing Cycle and not proceed to the Wash cycle, most likely one of these 3 parts malfunction: Failed Water Inlet Valve or Inlet Valve Tap is in OFF position. Shift Actuator not able to change position, before Wash cycle. Control Board malfunctioned.
How do you drain a washer that won’t drain?
What to Do When Your Washing Machine Won’t Drain
- Perform a Master Reset. Unplug your washer for about one minute. …
- Test the Lid Switch Assembly. …
- See if the Drain Hose is Kinked. …
- Check the Drain Hose or Pump for Clogs. …
- Clean out the Coin Trap. …
- Check the Water Level Control. …
- Schedule Washing Machine Repair.
How often should you drain your washing machine?
Washing machines can be breeding grounds for salmonella and other germs. When you wash items in hot water, your machine is being cleaned as well, but once a month, you should still run an empty load with hot water and about a cup of distilled white vinegar to sanitize the basin and wipe out any lingering germs.
Why is my Samsung washer not draining?
It could be because the washer isn’t level or the drain tube is clogged or pinched. Adjust the legs of your washer, as needed, and check the drain tube for kinks or damage. Troubleshoot a Samsung washer not draining with these likely causes and straightforward solutions.
