If a Bosch dishwasher displays the error code e01, it means the control panel is malfunctioning. But, do not hurry to buy a new board. First, check the electricity supply and the wires connected to the panel. If the dishwasher does not work at all or fails, the faulty control board is probably the case.
Table of Contents
READ ALSO
similarly, How much salt do I put in my Bosch dishwasher?
Filling the salt dispenser
Before using the appliance for the first time, pour about 1 litre of water in the salt container. Then refill with salt (not cooking salt) until the salt container is full (max. 1.5 kg). When you refill the salt, water is being displaced and drains off.
on the other hand, What does Error 24 mean on a Bosch dishwasher?
It means that the dishwasher is not draining properly due to the drain filter being blocked. Possible causes for the E24 error code: The drain hose could be blocked. … After fixing the problem, reset the dishwasher according to the owner’s manual.
also, How do you clear the error code on a Bosch dishwasher? The most standard way to reset a Bosch dishwasher is simply to press down on the Start button for 3 seconds. The Start button is often labelled with “Reset” as well, or even “Reset 3 Seconds”. For most issues, like a frozen display, this will clear the settings and allow you to begin using the dishwasher again.
What does E01 mean on Beko dishwasher?
If the e01) error means the water isn’t flowing into the dishwasher fast enough, you should shut the dishwasher off for 5 minutes and replace the valve if the water pressure is good.
Do I need to add salt to my Bosch dishwasher?
For the water softening system to function properly, it needs dishwasher salt. Never fill the salt dispenser with detergent as this can damage the water softening system. …
What happens if you don’t put salt in dishwasher?
If you leave loose salt in the dishwasher, not only will it not work properly, but it may also give you slightly dirty (or salty) dishes. And don’t put salt into other spots marked for normal detergent, dishwasher cleaner or rinse aid. This could easily break your appliance.
What is error 22 on a Bosch dishwasher?
Dishwasher Troubleshooting: E22 Bosch Dishwasher Error Code
An E22 error code indicates that the dishwasher filter is blocked. The filter is the area where food particles get caught and it needs to be cleaned regularly. Remove the filter to make sure it is not clogged.
What does Error 25 mean on a Bosch dishwasher?
An E25 error code indicates the drain pump is blocked or the drain pump cover is loose or missing. What dishwasher troubleshooting do I need to do to fix the error code E25?
Can you reset a Bosch dishwasher?
To reset the modern Bosch dishwasher, press and hold the start button for about 3 to 5 seconds. On some older Bosch models, the reset feature may be called “cancel” or “drain”. … Pressing the on/off button does not reset the dishwasher’s Electronic Controller for most Bosch dishwashers.
What does F mean on a Bosch dishwasher?
The F error indicates a water supply problem. This could be the water is accidentally turned off or the aquastop has operated. Turn the water supply off, disconnect the aquastop, lay it down as low as possible to drain and then reconnect it. Turn the water back on and see what happens. Hope this is of some help.
What does E02 mean on Beko dishwasher?
E02 is a water inlet fault. The below is from the service manual Incoming water to the machine is monitored via a water counter (flow meter)system.
What does E01 mean on a dishwasher?
What Does the E01 Code Mean? This code indicates that there is a problem with the rinse cycle that is supposed to take place once the wash cycle is complete. If the water inside your dishwasher is not properly restored, this error will appear. In other words, not enough water is entering the appliance.
How do I fix E01 error on Beko dishwasher?
E 01 is overflow error in your Beko and it seems flood switch is stuck in upright.To solve this issue unplug the dishwasher and then pull the machine out and tip it backwards to around 45 degrees as this allows the excess water to drain and will reset the flood switch.
What is the salt symbol on a dishwasher?
When the salt light on your dishwasher comes on, it’s time to refill. The salt reservoir is located on the inside of your appliance, below and to the left of the bottom dish rack.
How often should you put salt in a dishwasher?
Quite simply, just add granular salt to the reservoir until it won’t take any more! The softener will use the salt to replenish itself each time you wash. As an approximate guide, you should do a full top up about once a month.
Which detergent is best for Bosch dishwasher?
We recommend and use FINISH™ detergent. Below is an overview of the different varieties of FINISH™ detergents.
- FINISH ® Powerball® Tabs: these include a presoaking agent, rinse aid, and detergent for a thorough clean.
- FINISH ® Quantum®: this helps remove tough food residue.
Is it necessary to add salt in dishwasher?
Step 3: top up the salt.
For the water softening system to function properly, it needs dishwasher salt. … Never fill the salt dispenser with detergent as this can damage the water softening system.
Where is the drain filter on a Bosch dishwasher?
Cleaning a Bosch Dishwasher Filter
The dishwasher filter is located on the bottom of the dishwasher floor. Grasp the top of the filter and turn it counterclockwise.
How do I get rid of standing water in my dishwasher?
Try Vinegar and Baking Soda
Mix together about one cup each of baking soda and vinegar and pour the mixture into the standing water at the bottom of the dishwasher. Leave for about 20 minutes. If the water is draining or starting to drain at that time, rinse with hot water and then run the dishwasher’s rinse cycle.
How do I clean my Bosch dishwasher filter with vinegar?
Dishwasher Tub Cleaning
White vinegar: Pour 1 cup of white vinegar in the base of an empty dishwasher and run a heavy clean cycle. Baking soda: After running a vinegar cycle, sprinkle 1 cup of baking soda in the dishwasher’s base and allow it to sit overnight. Run a regular, empty clean cycle in the morning.
How do I fix Error 25 on my Bosch dishwasher?
The first thing to do when an e25 error occurs is to check the filter inside the dishwasher and the pump impeller. If the code appeared during the dishwashing, prepare for the fact that there may be too much water on the floor.
How do you reset a Bosch dishwasher?
To reset the modern Bosch dishwasher, press and hold the start button for about 3 to 5 seconds. On some older Bosch models, the reset feature may be called “cancel” or “drain”.
Don’t forget to share the post !
