C-24. The temperature sensor has detected the temperature of the oven rising at a higher than normal rate. This is generally caused by the vent, which is located at the center of the back of the cooktop, being blocked or partially blocked. If the vent is covered by something, like a pan, remove it.
Table of Contents
READ ALSO
similarly, Why does my Samsung oven say C-d0?
That is a control shorted key code, when you get that code you will need a new touchpad for the unit. You can try and unplug the unit for a full minute and reset it, but if it is new and under warranty I would have it fixed for free.
on the other hand, What does C F2 mean on Samsung oven?
Samsung Oven Error Codes
| Error Code | Solution |
|---|---|
| C-F2 | This code occurs if communication between the Main and Touch is interrupted. Touch OVEN OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power. |
• 29 févr. 2020
also, Why does my stove says bad line? The bad line means that the oven is only getting 120 volts, which is not enough to run the oven properly. Plug the unit back in. The circuit breaker should be turned off. The back access panel should be removed if it still doesn’t work.
What does C do mean on Samsung microwave?
The C-DO error code typically occurs when a button has been pressed for 10 seconds or more. Please, reset the unit by cutting the power for 2 minutes.
What does C-21 mean on a Samsung oven?
Samsung Oven Error Codes
| Error Code | Solution |
|---|---|
| C-21 | This code occurs if the internal temperature rises abnormally high. Touch OVEN OFF, and then restart the oven. If the problem persists, disconnect all power to the oven for at least 30 seconds and then reconnect the power. |
• 29 févr. 2020
What does the code C-do mean on a Samsung microwave?
The C-DO error code typically occurs when a button has been pressed for 10 seconds or more. Please, reset the unit by cutting the power for 2 minutes.
What does C-do mean on Samsung microwave?
Samsung Microwave Error: C-DO. Error Code Definition: Door Or Key Error.
What does C 21 mean on a Samsung stove?
0. The C21 code you are seeing indicates that the oven is overheating.
What does C do mean on a microwave?
Samsung Microwave Error: C-DO. Error Code Definition: Door Or Key Error.
Why does my Samsung microwave say C 10?
Errors C-10, C-11, C-12 | Samsung Microwave Oven. The samsung Microwave Oven Error C-10, C-11, C-12 is an error showing some trouble with the Gas or PH sensor. These errors are very common errors in this brand of Microwave Ovens.
What does F4 mean on a GE oven?
F4 fault code usually means that the oven sensor needs to be replaced. Fault codes are programmed in all electronic ranges. These codes help GE Appliances Factory Service technicians quickly diagnose issues.
What does bad line mean?
a bad (telephone) line: a bad or poor (telephone) connection. noun.
Why does my Samsung microwave say C-10?
Errors C-10, C-11, C-12 | Samsung Microwave Oven. The samsung Microwave Oven Error C-10, C-11, C-12 is an error showing some trouble with the Gas or PH sensor. These errors are very common errors in this brand of Microwave Ovens.
How do I fix my Samsung microwave sensor?
Disconnect the Smart Moisture Sensor connector completely. Remove the old sensor and install a new one in its place, firmly fixing it with screws (its cost is about $ 15 – 30). Connect the cable to the control board and tie the power cables into a bundle again. Guide the back edge of the panel inward and fix it.
What does 23 E mean on a Samsung refrigerator?
ANSWER Chyle, The E 23 is for the condenser fan error which is located in the back of the unit. You will need to pull the unit out from the wall and remove the cover at the bottom to access the condenser fan motor.
What does it mean when your microwave says sensor error?
The error message is caused by opening the microwave door too early when you are using the sensor cooking function. Removing the error message from the microwave display takes only a moment.
What does Ctop mean on Samsung oven?
– If the problem comes back then replace the oven electronic control board. Samsung Range Error Code = E-56. Error Code Definition = Cooktop Has Error. Parts Needed To Repair = Cooktop Components.
How do I turn on Sabbath mode on my Samsung oven?
You can turn the oven off, but you will still be in Sabbath mode and unable to cook with the oven again until you turn Sabbath mode off. To do so, touch and hold the buttons from the previous step for 3 seconds until SAb disappears from the display.
What does 1S mean on microwave?
The “1S” and “2S” normally mean “one stage” and “two stage” cooking.
What does C d0 mean on an oven?
C-d0. Control buttons are. pressed over 10 seconds. Clean the keys and check if there is water on the surface around key. If it occurs again, turn off the microwave oven over 30 seconds and try setting again.
What is code e11 on a Samsung microwave?
This error e11 means that your humidity sensor for your microwave has failed. … The biggest problem with replacing the part is that you must uninstall the entire microwave and remove the outer shell of the microwave to access the sensor mounted above the cavity on the left side.
How do I fix the F2 code on my GE oven?
If the F2 error code has frozen on the oven after shutting down, then unplug the oven for 30 seconds. Plug the oven back in and see if the error code appears again. At times glitches will occur and the error code will randomly appear.
What does F2 mean on a GE stove?
If you have a GE oven, the error code F2 on the oven means that the temperature sensor has detected a temperature in excess of the preset threshold. The cause could be a sensor malfunction.
What does the code F3 mean on a GE oven?
When the F3 code flashes on your GE oven, this indicates that there is a fault with the oven temperature sensor. … These include the wire harness, control board or the oven temperature sensor itself.
Don’t forget to share the post !
