Bosch washing machine problems with spin can be easily fixed by a qualified engineer. The machine also won’t spin if the lid switch is faulty, the drive belt is broken, or the door won’t close. Again, this is most likely to be caused by a kinked or blocked hose, or a blocked filter.
Table of Contents
READ ALSO
similarly, How do you reset a Bosch classixx?
Reset on Bosch Classixx Washers
- Press the “on / start” button and hold it pressed.
- We turn the selector from the “off” position two positions to the left (two clicks). …
- We wait 2 seconds and release the “on / start” button.
on the other hand, Why will my Bosch washing machine door not open?
A problem with the door both opening and closing properly can be caused by clothes, especially smaller garments such as socks. These can get jammed between the door and the washing machine housing. Ensure that there are no clothes caught between the door and the housing before starting a programme.
also, How do I reset my Bosch 300 washing machine? Resetting Bosch Vision 300 Series Washer
- Set the knob to off.
- Hold down both the Spin Selector button and the Allergy Rinse button simultaneously.
- While holding these two buttons down, rotate the knob one click to the left, to the “cold” position.
How do you reset a Bosch top load washer?
Turn the Bosch washing machine’s selector to “Off.” For a full reset, unplug the machine for 30 seconds and plug it back in. Turn the selector to “Drain,” and restart the drain program.
How do you reset a Bosch F21?
To reset the F21 error on a Bosch machine, turn the program knob from the off position (12 o’clock) to the 6 o’clock position and immediately press and hold the spin button. Then while holding the spin button turn the knob to 7 o’clock position and continue holding the spin button for 15 seconds.
How do I fix e16 error on my Bosch washing machine?
The door is not locked properly
Open and close the door again and press the “start reload” button (play and pause button). If necessary, open the washing machine door, remove some of the cothing items and then push the door closed again.
How do I reset my Bosch washing machine 4?
Press and hold down on the spin button and simultaneously turn the dial to the 7 o’clock position. Hold the spin button for around 5 seconds and then release. Turn the dial to the off positionIt may take a few attempts for the machine to reset.
How do you unlock a Bosch front load washer?
Here is how to unlock it-
- Press and hold the start button for three to five seconds until you hear a beep and the key symbol disappears.
- Another way is to press and hold the “rpm” and the “finished in” buttons together until you hear a beep and the symbol disappears.
How do I reset my Bosch top loader washing machine?
Turn the Bosch washing machine’s selector to “Off.” For a full reset, unplug the machine for 30 seconds and plug it back in. Turn the selector to “Drain,” and restart the drain program.
Why does my washing machine not work?
1 Be sure the machine is plugged in and turned on. If necessary, check the receptacle it’s plugged into for power, using a working lamp, appliance, or voltage tester. Be sure the washer lid is closed completely. 2 If the receptacle seems dead, check the circuit breaker or the fuse that serves it.
Why is my washing machine not starting?
Power Source
Make sure the machine is tightly plugged in. Next, check for a tripped circuit breaker. Reset the breaker and try to start the washer. If neither is at fault, you may have a damaged power cord.
How do you reset error F21?
Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water. Once all the water drains, try selecting a new wash cycle and pushing “Start.”
What does F21 error code mean?
If you see error code F21 on your Whirlpool washing machine, this refers to a water drain problem. The washer won’t be able to finish the cycle and your laundry will be wet. This error code means draining is taking too long, and something is wrong with the water pumping.
What does code F21 mean on a Bosch washing machine?
F21” is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line.
What is E16 error code?
An E16 error code means there is a heater insulation problem which could cause the tripping of your fuse box and other random cycle errors, but it’s hard to prove without the replacement of your heater. An E17 error code means that there is an issue with the motor tachometer and could result in your motor not spinning.
What is an E16 error?
The E16 error is a programmed error that comes up on your TV screen once your DSTV subscription is expired. The error showing up on your TV screen isn’t a problem unless it shows up when you have an active subscription running.
What is E16 error on Bosch washing machine?
Washing machine troubleshooting: error code E16 or F16
These error codes indicate that the door is open. Please close the door and proceed as usual. If you’re still getting the error after closing the door, please verify it’s properly closed.
How do you unlock a front load washer?
How To Open A Front Load Washing Machine Door After Starting The Wash Cycle
- How to unlock washer door? …
- Within at least 5 minutes of pressing the START/WASH button, press the START/PAUSE button to unlock the washer door. …
- Now open the washing machine door once unlocked and add or remove any extra clothing.
How do you bypass a washing machine door lock?
One of the main ways of bypassing a washing machine door lock is by disabling the safety circuit. It is good to note that the process involves cutting of electrical wires. Thus, you need to disconnect your machine from the main power supply. Additional, cutting the cord may void your warranty.
How do you unlock the child lock on a Bosch washing machine?
If your Bosch washing machine has an advanced touch screen display, there should be an illuminated square button with a key symbol and “3 sec” underneath it. Simply hold this button down for three seconds, the button will darken and an audible beep will indicate that the child lock has been deactivated.
How do you fix a washer that won’t start?
How to Fix a Washing Machine that Won’t Start
- Activate the power button.
- Test the outlet.
- Reset outlet if necessary.
- Make sure the power cord is plugged in.
- Check if fuses are blown or the circuit breaker is thrown.
- See if Delay Start has been pushed.
- See if Control Lock has been activated.
How do I know if my washing machine control board is bad?
A failed front-load washing machine control board has several symptoms, including the washer not starting, filling, spinning or draining.
How do you fix a washer that won’t drain?
What to Do When Your Washing Machine Won’t Drain
- Perform a Master Reset. Unplug your washer for about one minute. …
- Test the Lid Switch Assembly. …
- See if the Drain Hose is Kinked. …
- Check the Drain Hose or Pump for Clogs. …
- Clean out the Coin Trap. …
- Check the Water Level Control. …
- Schedule Washing Machine Repair.
Don’t forget to share the post !
