We therefore, recommend that the maximum size of a roman shade be 72” wide x 72” in length or a combination that equates to a similar square footage. We are not saying that roman shades cannot be made larger, rather that you must know the potential of overly heavy shades which are naturally harder to retract.
– Measure your window. …
– Measure the head rail of your shade from one end to the other.
– Subtract the measurement of your window from the measurement of the head rail. …
– Lay the shade on a flat, solid surface.
Thereof, What are standard window shade sizes?
Picture Window: Standard heights range from 2 to 8 feet, and standard widths are 2, 3, 4, 5, 6 and 8 feet. Sliding Window: Standard heights are 24, 36, 48 and 60 inches, and standard widths are 36, 48, 60, 72 and 84 inches.
Also to know is, Can Roman shades be longer than window? We recommend letting your roman shade extend at least 1”-1.5” on each side of window to avoid light seepage. So whatever is the width of your window from frame to frame, add total of 2”-3” to that.
Subsequently, question is, What size is a standard size window? Standard widths are 2 feet, 3 feet, 4 feet, 5 feet, 6 feet and 8 feet. Standard heights in whole numbers range from 2 feet tall all the way 8 feet tall, with additional window heights of 18 inches, 52 inches, 54 inches and 62 inches.
Also, How wide can a Roman blind be?
300cms
Can blinds be cut to width?
Occasionally window blinds are mis-measured and are too large to fit in the window frame. Most horizontal blinds such as wood blinds and faux wood blinds can be trimmed or cut down to the right width so they can be installed.
What is the size of a standard double window?
Double Hung Windows Double-hung windows are the most common window types in homes across the country. Since these windows are so popular, double-hung windows come in many different standard sizes. Their widths can range from 24-48 inches, while their heights range from 36-72 inches.
How much smaller should blinds be than the window?
Not Adding Width To Outside Mount Blinds We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
Can you reduce the width of Roman blinds?
Roman shades can be cut to fit your window. … However, if your window is slightly narrower than one of these standard sizes, trying to find Roman shades to fit your window can be difficult. One option is to buy Roman shades that are slightly wider than your window and trim the shade to fit your window.
What size is a standard bedroom window?
Most homes are fitted with single hung or double hung bedroom windows. If this is the case, it’s quite likely your bedroom windows are one of the following sizes: 24 in. x 36 in.
Can blinds be longer than window?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
How do you measure a roman blind for an outside mount?
Do Roman blinds look better in the recess?
In summary, for Venetian, roller and vertical blinds, we would recommend they be hung from within the recess. However, Roman blinds would be better suited outside the recess, as they are able to let more light enter into the room.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. … 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How wide can Roman blinds be made?
300cms
What size should a bedroom window be?
For determining egress window sizes and placement, the International Building Code holds that every bedroom must contain at least one egress window. It must be at least 5.7 square feet, that is at least 20 inches wide by 24 inches high, with an opening no higher than 44 inches from the floor.
How do you cut roller blinds that are too wide?
Don’t forget to share this post 
References and Further Readings :