The Whirlpool Duet Dryer F01 error may be able to be fixed with a simple reset of the main control. Unplug the dryer for 1 minute and plug it back in this will reset the control if the error persists after that you will need to check the dryer thermal fuse. The fuse is located on top of the blower wheel housing.
similarly, What does error code F01 mean on Whirlpool Duet dryer?
Troubleshooting and Repair – F01 Error Code – WED8300SW0. The F01 error code means the primary control unit in the dryer has failed and will have to be replaced. The control that needs replacing is the electronic control board not the user interface and/or control panel.
on the other hand, What does F1 mean on a front load dryer?
The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer. Without the part, the dryer will not operate.
also, Is it worth it to fix a dryer? Is it worth repairing a dryer? Dryer repairs are worth it if the appliance is less than 4 years old and the cost is less than $400. For older dryers and/or costly repairs, replacing your appliance is more cost effective.
How do I fix F1 error on my Whirlpool dryer?
When the Whirlpool Cabrio displays an F1 error, this means the the control board is having difficulty communicating with the motor. To fix your F1 error, you can first try to unplug your washing machine for 15 minutes and then plug it back in. If this doesn’t work, you will need to replace the control board.
How do I reset my Whirlpool front load dryer?
If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.
How do you reset the code on a Whirlpool Duet dryer?
How do I reset my Whirlpool Duet steam dryer?
- Inspect household fuses or breakers.
- Close the dryer door firmly.
- Press and hold the “Start” button for five seconds.
- Check the display on the dryer for error codes.
- Press the “Start” button and hold for several seconds to restart the dryer if “PF” appears on the display.
What does F 1 mean on a Kenmore dryer?
The F1 fault code indicates a primary control board failure. Some Kenmore Oasis dryers have a motor control board in addition to the primary control board.
What does F mean on Whirlpool dryer?
The F-01 error code indicates a primary control failure. The primary controls are located inside the main control panel where the dryer cycles and settings are displayed.
Is it cheaper to repair or replace a dryer?
The national average cost for dryer repair is $170.
If your dryer is acting strange, investing in repair services is usually much cheaper than buying a replacement dryer. New dryers cost anywhere from $400 for entry-level to $2,000, or more, for top of the line.
Is a 10 year old dryer worth fixing?
It’s recommended as a rule of thumb that if your dryer is close to 10 years old, you’re better off replacing it outright, especially if the quote for repairs comes in high.
Is it worth fixing a 15 year old dryer?
The average electric dryer should last about 14 years. The average gas dryer is a little less durable, lasting about 13 years. If you’re approaching your dryer’s average lifespan, but a $40 repair will last you another year or two, it may be best to repair it for now.
Where is the error code on a Whirlpool Duet dryer?
Unplug the dryer for 5 minutes and then plug it in. If the code returns, replace the main electronic control board. A button is stuck on the keypad on one of the two user interface control assemblies in the console. If you can’t free the button, replace the user interface control assembly with the stuck button.
What does F mean on a dryer?
The F-01 error code indicates a primary control failure. The primary controls are located inside the main control panel where the dryer cycles and settings are displayed. Any burns or arcing on the motherboard where the wires are connected could mean the primary control was shorted out.
Are there any recalls on Whirlpool dryers?
Whirlpool said it has identified a potential risk with two types of tumble dryers manufactured between April 2004 and September 2018. Potentially faulty machines are sold under the brand names of Creda, Hotpoint, Indesit, Proline and Swan. Whirlpool has released a full list of affected models on its website.
How do you reset a front load dryer?
Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.
What would cause my dryer not to start?
Common dryer issues include a faulty door switch or start switch and control problems such as a broken dryer timer or faulty electronic control board: … If the drum light doesn’t turn off, a failed door switch is the likely reason the dryer won’t start. A blown thermal fuse often prevents an electric dryer from starting.
How do you reset a dryer?
In the Settings menu, find Backup & reset, then tap Factory data reset and Reset phone. You’ll be prompted to enter your passcode and then to Erase everything. Once that is done, select the option to reboot your phone.
What does it mean when a dryer says F1?
The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer. Without the part, the dryer will not operate.
How much is a thermal fuse for a dryer?
Other Costs to Fix a Dryer
| Part | Material Cost | Total Cost |
|---|---|---|
| Thermal fuse | $5-10 | $80 -$130 |
| Dryer thermostat | $3-20 | $180 |
| Bearing | $50 | $130-$250 |
| Roller | $10-30 | $90-$230 |
Where is the reset button on a dryer?
Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes.
How do I clear the error code on my Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do I clear the error code on my Kenmore dryer?
There is no way to reset or clear the error codes. You could try running a diagnostic test. Sometimes the error codes go away and do not come back after running diagnostics.
How do you reset a Kenmore he2 dryer?
Press and hold START until dryer starts. Press STOP twice or open the door. is interrupted for more than 5 minutes, the dryer will shut off. Select new cycle settings before restarting the dryer.
What does a dryer thermistor do?
Thermistor Specifications
This is a thermistor, also known as a dryer thermistor. The thermistor is attached to the blower housing, it will help regulate and oversee the temperature within the dryer. The most common symptom of needing a new thermistor is the dryer cycle not working.
Don’t forget to share the post !
