A UR error code means that the washer is detecting an unbalanced washing load. On some Samsung washers, a UE error code may be given instead. The most typical causes of the error are large, heavy items, such as large towels or bathmats, which end up on one side of the washer or tangled up in the agitator.
similarly, How do I connect my Samsung washer and dryer to my phone?
Smart Care and the Samsung Smart Washer/Dryer app can help you figure it out.
- Touch Smart Care on the washer or dryer, and then open the Samsung Smart Washer/Dryer app on your phone. …
- Tap Smart Care on your phone. …
- Tap Smart Care again, and then tap Next.
on the other hand, How do I get my Samsung washer to spin only?
To run a Spin Only cycle on a model that does not have this option on the cycle selector dial, perform the following:
- Power the unit on.
- Press and hold the spin key for approximately 3 seconds. A chime will sound.
- Select the spin level, if desired.
- Press the Start/Pause button.
also, How do I balance my Samsung washer?
- 1 Tap Settings on your washing machines display.
- Tap Calibration.
- Tap Start. The washing machine door will lock and the drum will rotate clockwise and anticlockwise for several minutes. When your washing machine has finished calibrating, it will turn off automatically.
What does Code U6 mean on Samsung washer?
When the Samsung washing machine displays a U6 error, it means the drum is out of balance during a cycle.
How do I connect Samsung washer to App?
Connect SmartThings to your Samsung Washing Machine
- 1 Open the SmartThings app on your phone. …
- 2 Press the ‘+’ icon on the SmartThings home screen followed by Add device.
- 3 Select the Washer icon from the list of appliances.
- 4 On the next screen, press Start.
- 5 Choose the location and room where your device is located.
Why is my washer not spinning all the water out of my clothes?
The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. It could be clogged, kinked, or even positioned incorrectly if you had to remove the drain tube to make another repair already. … If the visual inspection checks out, you will want to remove the washer drain hose.
Can you just do a spin cycle on Samsung washer?
Note: Some models can select a Spin Only cycle by pressing and holding the Spin button for about 3 seconds until a cycle time displays. You can then toggle the desired spin setting and start the cycle as normal.
Why does my Samsung washing machine not spin?
If your Samsung washing machine does not spin fully or at all during the rinsing or spinning phase of the cycle it is most likely to be caused by an unbalanced load. … 1 Open the door and redistribute the washing more evenly around the drum. 2 Check that the drum is not over or under loaded.
Why is my Samsung washer shaking violently?
A severely under loaded or overloaded washer will vibrate excessively. If you are washing one pair of jeans, add a few additional items to create a balanced load. If your washer is overloaded, try to remove a few items to create a balanced load. Reposition the load.
What Samsung washers have been recalled?
The following model numbers are included in the recall depending on the serial number. Consumers should check with Samsung to see if their washer is recalled.
…
| Models | ||
|---|---|---|
| WA40J3000AW/A2 | WA45H7000AP/A2 | WA45H7000AW/A2 |
| WA5471ABP/XAA | WA5471ABW/XAA | WA56H9000AP/A2 |
| WA56H9000AW/A2 |
• 4 nov. 2016
What does the red shirt mean on Samsung washer?
1-3 of 3 Answers. Hi, this is the AddWash icon. When the AddWash indicator turns on, you can stop the washer and put additional laundry into the drum. ^Rosi. Answered by Samsung 4 years ago.
What does 4C2 mean on Samsung washer?
According to the owners manual, 4C2 is a trouble code referring to the cold water supply hose being improperly connected, possibly causing your delicate wash to fill with hot water. Your machine is programmed to wash delicates in cool or cold water.
How do I start my Samsung washing machine remotely?
Control your washing machine with SmartThings
- Put your laundry in, add your detergent, close the door, and then press Smart Control.
- Open the SmartThings app, and then tap Menu (the three horizontal lines).
- Tap All devices, and then select your washing machine.
- Select the cycle you’d like to run, and then tap OK.
What is deep fill on Samsung washer?
Deep Fill: Adds more water to the cycle. Note: The cycle time will be extended when you use this function. This setting is not available on the Bedding/Waterproof, Normal, Self Clean, or Spin Only cycles.
Does Spin Cycle drain water?
It removes the water from the tub during the spin cycle. The washer pump forces water from the bottom of the machine into the drain hose. The drain hose loops to the top of the machine, and then down to the drain, enabling the tub to fill. When the water reaches the bend in the hose, it goes out of the drain.
Why do I have to spin my washer twice?
– Check the drain pump debris filter or coin trap, objects may be blocking the water flow. – Check inside drain pump and all hoses connected to drain pump for foreign debris or small pieces of clothing. – Be sure the wash load of clothing is balanced, balance out the wash load if you see all clothing to one side.
Can I put soaking wet clothes in the washer?
Is it okay to put wet clothes in a washer? Yes, if they are wet with water or some water-based liquid like lemonade or Diet Coke. They are going to get soaked again.
Do you add detergent to self clean Samsung washer?
To run a Self Clean cycle, make sure the washer is empty, press Self Clean, and then press Start. You don’t need to add any cleaner when running self clean. However, we do recommend using bleach if you already have an existing mold smell (see our guide for details).
How long does quick wash take on Samsung washer?
Quick Wash is a 15 minute quick timed wash program in Samsung front loader washing machines. Also, you can freely select the cycles between 15 to 60 minutes for perfect fast washing with no aggressive action.
What do you do if your Samsung washer won’t drain?
Samsung washing machine does not drain
- Turn off the washer and check the level. If the washer isn’t level it may not drain correctly. …
- Inspect the drain hose. …
- Clean the pump filter (front loaders only). …
- Turn the washer back on and start a cycle.
What do you do when your washing machine doesn’t spin?
If your washer seems to complete all of its cycles but won’t spin:
- Check to see if the clothes have jammed or are unbalanced in the drum. …
- Check the lid switch and the tab on the lid that strikes it. …
- Check the machines’ drive belt. …
- There may be a problem with the controls; in this case, call an appliance repair person.
What causes a front load washer to not spin?
Front-load washer tubs spin thanks to a drive belt that runs off of the motor. A loose, frayed, or torn belt could be why your washer won’t spin. Overloading your washing machine can cause the belt to loosen or become worn out. Inspect the drive belt closely.
Don’t forget to share the post !