Whirlpool Condenser Coils are Dirty. Condenser coils cool refrigerant to maintain a cool temperature within the refrigerator. If the coils become covered with dust and debris, they may not be able to do so effectively. Consequently, your refrigerator won’t get cold but freezer will still maintain its temperature.
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out.
Thereof, What to do if fridge is not cooling?
– Make sure your fridge is getting power.
– Check the refrigerator’s thermostat.
– Test the seals on your fridge doors.
– Determine whether the refrigerator is level.
– Clean the condenser coils.
Also to know is, Why would fridge suddenly stop working? Typical causes are: 1) the door is left open frequently, 2) the condenser coils need cleaning, 3) the door doesn’t seal against the refrigerator box, 4) the cold control is set too cold, or 5) something is blocking the flow of cold air inside the fridge.
Subsequently, question is, How do I reset my Kenmore Coldspot refrigerator? unfortunately there is no reset button on the refrigerator the only way to reset most electronic controlled units is, to unplug the power cord for about a minute or so and then reconnect it. This resets the board.
Also, Why is my Kenmore refrigerator not cooling?
If the refrigerator is not cold enough, the evaporator fan motor might have failed. … If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. The condenser fan motor draws air over the condenser coils to cool them.
What should you do if your refrigerator stops working?
– Remove the Food and Put Into a Cooler. When your refrigerator stops working and it’s not a simple fix, make sure you get the items out as soon as you can and into another place where they can remain cool. …
– Call a Professional to Find Out What’s Wrong. …
– Choose Repair or Replace.
How do I fix my freezer but my fridge is not working?
To temporarily get the fridge up and running, remove the rear panel of the freezer and remove all the built up frost (pouring hot water over the coils is best). If things cool down but fail again after a few days, you may have to replace one or more parts of the defrost system.
How do you fix a refrigerator that is not cooling freezer is working?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out.
How do you diagnose a refrigerator problem?
– Check the temperature setting.
– Assure that there is enough room for air flow in the refrigerator or freezer.
– Check for air flow restrictions in vents.
– Test the temperature control.
– Clean the condensor coils.
– Check the door seals.
– Test the door switch.
– Test the defrost heater.
How much does it cost to fix a refrigerator that is not cooling?
If and when a fridge compressor fails the pricing can be between $500 to even $1000 to fix, the same goes for if the refrigerator’s seal system fails (the coolant circulation). All that being said, if your refrigerator is running warm it does not always mean that you’ll have to spend this much to repair.
Why does my freezer get warm?
Also, check the condenser coils to see if the coils are dirty-dust on the coils can prevent air from cooling the refrigerant. Clean the condenser coils if dirty. A failed electronic control board or a bad thermistor (also known as the temperature sensor) can also cause your freezer to warm up.
Is there a reset button on Kenmore refrigerator?
There is no reset button for the compressor but a model number would be helpful giving you a more specific answer. One thing you might listen for is a click or a hum as the compressor tries to start/run. Often the problem is with the start relay and overload and not the compressor itself.
How do you fix a refrigerator freezer that doesn’t work?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out.
How do I reset my refrigerator compressor?
– Locate the refrigerator power cord on the back of the appliance.
– Disconnect the power cord from the wall outlet. …
– Turn both the fridge and freezer controls to “Off” or “0” inside the fridge. …
– Adjust the fridge and freezer controls to the desired setting. …
– Allow the fridge up to one day to adjust to a stable temperature.
Why is my Kenmore fridge not cooling?
If the refrigerator is not cold enough, the evaporator fan motor might have failed. … If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. The condenser fan motor draws air over the condenser coils to cool them.
How do you level a Kenmore Coldspot refrigerator?
Use a screwdriver to adjust the leveling screws. Turn the leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. It may take several turns of the leveling screws to adjust the tilt of the refrigerator.
Why is my refrigerator running but not cooling?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). … Plug in the fridge and make sure the fan runs when the compressor is running.
Don’t forget to share this post 💖
References and Further Readings :
