Causes: If your freezer won’t freeze, most likely the condenser coils are dirty which reduces the overall cooling capacity of the freezer. Evaporator fan motor is malfunctioning, and since it’s in charge of circulating the air throughout the freezer, this will need to be resolved, pronto.
similarly, How do I make my Kenmore freezer colder?
To adjust the temperature of a Kenmore refrigerator, select the fridge temp and freezer temp buttons. Hold these for a few seconds until the display beeps. Press the fridge temp button and go through the available temperatures until you find the 37 degrees Fahrenheit setting.
on the other hand, Why is my ice cream not freezing in my freezer?
Soft ice cream is a sign that your freezer is not set cold enough, or it is not freezing properly. I assume you checked the setting, so it is likely not working properly. Check underneath to see if the “coil” is full of dust, this is a common issue. Most have a coil underneath, and it can be vacuumed.
also, Why is my freezer cold but fridge warm? It is standard to find that most refrigerators use a fan to move cold air that is in the freezer into the evaporator. Then that air is pushed into the refrigerator area to keep it at a cool temperature. When this fan is not functioning properly, your freezer may seem fine, but your refrigerator will seem warm.
How do I reset my freezer compressor?
4 steps to reset a refrigerator compressor
- Unplug your refrigerator. …
- Turn off the refrigerator and freezer from the control panel. …
- Reset your freezer and fridge temperature settings. …
- Wait for the refrigerator temperature to stabilize.
What is the best temperature for a Kenmore Elite freezer?
Ideal Freezer Temperature
Kenmore recommends setting your freezer compartment between 0 and 2 Fahrenheit or -16 or -17 Celsius. Food is safely frozen at this temperature, reducing the risk of food thawing out and spoiling. Slightly lower than recommended is better than slightly higher.
Why is my Kenmore refrigerator not cold enough?
If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. The condenser fan motor draws air over the condenser coils to cool them. The condenser fan motor is located underneath the refrigerator near the back.
How do you fix a freezer that will not freeze?
When Your Freezer Isn’t Freezing: 3 Tips
- Check the Seals. Seals are located around the door of the freezer. …
- Move Items Around. This seems almost too simple to be a solution, but moving things around in the freezer can often provide a quick fix. …
- Don’t Freeze Up on Calling a Professional.
How do I fix my refrigerator that is not cooling?
Vacuum the coils under or behind the fridge. Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out.
How do I know if my fridge freezer is broken?
Signs That Your Fridge Freezer Is Broken
- Food going off too quickly. Food going mouldy quickly is a sure sign your fridge is struggling to regulate its temperature, particularly in the warmer months. …
- An expensive energy bill. …
- Too cold. …
- Strange noises.
Why the fridge is not cold but the freezer is whirlpool?
Whirlpool Condenser Coils are Dirty. Condenser coils cool refrigerant to maintain a cool temperature within the refrigerator. If the coils become covered with dust and debris, they may not be able to do so effectively. Consequently, your refrigerator won’t get cold but freezer will still maintain its temperature.
Does a freezer have a reset button?
Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge.
How do you know if your fridge compressor is broken?
The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it’s likely there could be a problem with the compressor.
Where is the temperature control on a Kenmore freezer?
On many of the Kenmore freezer models, the electronic digital freezer control will be located on the back wall toward the bottom. The image below shows a digital control located on the front of the evaporator cover on a common model.
What temperature should a freezer be set at?
Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C). Check temperatures periodically.
What number do I set my freezer to?
The “0” setting is OFF, which turns the cooling off. Turn knobs to lower numbers for warmer temperatures and to higher numbers for colder temperatures. The setting of 5 for both the fresh food and freezer section is the recommended setting for most environments.
How do you fix a refrigerator that is not cold enough?
Depending on what’s causing your fridge not to keep perishable foods cold enough, the following procedures might help.
- Make sure your fridge is getting power.
- Check the refrigerator’s thermostat.
- Test the seals on your fridge doors.
- Determine whether the refrigerator is level.
- Clean the condenser coils.
How do I make my fridge freezer colder?
On every fridge the rules for the coldest settings are always the following: The numbers on the fridge’s temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain. Setting it to 5 will make your fridge the coldest.
How do I know if my freezer is broken?
If your freezer works perfectly, the object should remain on top of the ice. If the freezer stops running over a longer period of time, suggesting a possible malfunction, the ice will melt. Your object will be enclosed in the ice – or even drop to the bottom of the container.
How do I know if my refrigerator compressor is not working?
The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it’s likely there could be a problem with the compressor.
How much does it cost to fix a refrigerator that is not cooling?
Some repairs that are generally worthwhile include cleaning a dirty coil, unclogging a drain line, or replacing a faulty thermostat. A fridge that won’t stay cold is usually suffering from a bad thermostat or a dirty coil. Both of these problems can be fixed in about an hour, and will cost about $50 to $250.
What is the first thing to check when a refrigerator stops working?
The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
How can you tell if refrigerator compressor is not working?
The best way to tell if something has gone wrong with the compressor is to pull the fridge slightly out from the wall and listen closely. If the motor is running with a slight humming sound but the temperature is above what its normal range should be, then it’s likely there could be a problem with the compressor.
Don’t forget to share the post !