Using the hand crank, unroll the awning until the front roller reaches waist height. Using the hand crank wand, roll up the awning until it is completely against the house. CAUTION: Once the awning is closed against the house, do not continue cranking.
Please turn the hand crank counter-clockwise to fully extend the canopy. Then turn the hand crank clockwise to retract/close the awning with canopy rolling over the top of fabric roller.
Thereof, How do you close a Sunsetter awning?
Also to know is, How do you close a Sunsetter awning manual? OpEN While facing the awning cassette, use the hand crank to bring out the canopy to its desired length. clOsE To close, reverse the process until the canopy has retracted back into the closed position.
Subsequently, question is, How do you close a retractable awning? OpEN While facing the awning cassette, use the hand crank to bring out the canopy to its desired length. clOsE To close, reverse the process until the canopy has retracted back into the closed position. Make sure your awning canopy always feeds back over the top of the fabric roller when retracting.
Also, How do you retract a Sunsetter awning?
OpEN While facing the awning cassette, use the hand crank to bring out the canopy to its desired length. clOsE To close, reverse the process until the canopy has retracted back into the closed position.
How do you adjust a retractable awning?
All that is required is to use the hand crank that is included with the awning. Simply twist right or left to achieve the desired angle of pitch and you’re all set.
Why does my Sunsetter awning keep closing?
If the awning automatically retracts every 30 to 60 minutes and and no wind is present, it means the batteries need to be replaced. … The wind sensor needs to be connected to its mounting bracket for it to function properly.
How do you adjust a Sunsetter awning?
– Open your awning fully. …
– Unplug the power cord from the outlet if you have a motorized model.
– Expose the Allen screws. …
– Adjust the height of the Sunsetter awning. …
– Do another visual inspection. …
– Plug-in the power cord back into the outlet.
– Test the Sunsetter awning to see if it operates smoothly.
How do I change the battery in my Sunsetter wind sensor?
Can I leave my awning out in the rain?
A heavy rain can cause a lot of damage to an an RV awning. You should always keep your awnings tucked in, or after a heavy rain lower one end to allow the water to run off the awning. Excessive weight can damage the fabric and cause costly damage. The large patio awning is the most likely to be damaged.
How much wind can a Sunsetter awning handle?
Answer: An independent lab tested our awnings for wind resistance. All of our models withstood winds between 55 and 75 mph without damage in controlled tests. However, we do recommend that you retract our awnings during strong, gusty winds.
How much does a Sunsetter retractable awning cost?
An instructional DVD is included. A basic 16-foot-wide-by-10-foot-deep SunSetter awning costs about $1,330 with a hand crank or about $1,650 for a motorized version. Retrofit motor kits are about $300.
How do you reset the remote on a Sunsetter motorized awning?
Press and hold the “Programming” button on the back of the remote a second time until the awning moves back and forth in short movements. The remote control is now reset and ready for normal use.
Can you use an awning in the rain?
If the pitch of the awning is less than 14° (to the horizontal) then the awning should really not be extended and used when it is raining. Water may collect on the cover and cause it to sag. … If your awning has been retracted when wet it should be extended again at the earliest opportunity to allow it to dry.
Can Sunsetter awnings be used in the rain?
Our Woven Acrylic Fabric and Sunbrella Performance Fabric are water repellent and will protect you from light rain and passing showers, as long as the water does not pool on the fabric.
Can a Sunsetter awning get wet?
Our Woven Acrylic Fabric and Sunbrella Performance Fabric are water repellent and will protect you from light rain and passing showers, as long as the water does not pool on the fabric.
How do you adjust the tension on a retractable awning?
Fully unroll the awning and then slide the upper arm into position. While standing in front of the awning, pull the awning tube downward and toward yourself. With your free hand tighten the knob on the upper tensioning arm. Repeat this step with the other tensioning arm.
Don’t forget to share this post 
References and Further Readings :