Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
12 inches
Thereof, What is the difference between a 10 and 12 rough in toilet?
What is the difference between a 10 and 12 rough in the toilet? … Most toilet bowls will work with either a 10″ or a 12″ distance, but a 10″ rough tank is slimmer to allow for the decreased distance. Because 10″ rough is more rare these days, a 10″ rough toilet tends to be more expensive.
Also to know is, How do I know if my toilet is a 10 or 12 rough? If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.
Subsequently, question is, What does 12 rough in mean for toilet? The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.3 days ago
Also, What does 10 inch rough in toilet mean?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. … Rear-outlet toilets are configured a bit differently.3 days ago
How far from the wall should a toilet rough in Be?
12 inches
What does 14 inch rough in mean for toilet?
Learn | Toilets | What is a Toilet Rough-In. A toilet’s rough-in refers to the measurement dimension from the finished wall to the center of mounting holes on the floor flange. Toilets are typically offered in either 10 inch, 12 inch, or 14 inch rough-ins.
How do you measure toilet rough in distance?
Measure for fit The rough-in measurement is the distance from the wall to the middle of the toilet flange, which lines up with the center of the hold-down bolts. For a toilet with two bolts on each side, measure to the center of the back bolt.
Can you replace a 10 inch rough in toilet with a 12 inch rough in toilet?
Ideally, the toilet’s rough-in should match the rough-in for your bathroom plumbing. However, even if a toilet is designed for a 10-inch rough-in, you can still install it into a space that has a 12-inch rough-in.
What does rough in mean on a toilet?
The rough-in measurement is the distance from the wall to the middle of the toilet flange, which lines up with the center of the hold-down bolts.
How do you measure a toilet rough in?
Measure for fit The rough-in measurement is the distance from the wall to the middle of the toilet flange, which lines up with the center of the hold-down bolts. For a toilet with two bolts on each side, measure to the center of the back bolt.
Should a toilet tank touch the wall?
No, there is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12″ with a few at 10″ and a few at 14″, but the actually distance the tank will be from the wall will vary. Yours is quite normal.
What is a 10 rough in toilet?
A toilet’s rough-in refers to the measurement dimension from the finished wall to the center of mounting holes on the floor flange. Toilets are typically offered in either 10 inch, 12 inch, or 14 inch rough-ins. … We also carry 10 inch rough toilets here. Finally we didn’t forget the big 14 inch rough toilets right here.
How do you measure for a toilet?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
What does rough in mean?
Rough-in is the stage of a construction project when the various mechanical, electrical, and plumbing lines are brought in. … This is when lines are laid out, but final connections are not made until other stages of the project are completed.
What does rough in size for toilet mean?
Your first step in choosing a toilet is to find your current toilet’s rough-in measurement so you can find a model that fits your bathroom. The rough-in measurement is the distance from the wall to the middle of the toilet flange, which lines up with the center of the hold-down bolts.
How do I know the rough in size of my toilet?
Measure for fit The rough-in measurement is the distance from the wall to the middle of the toilet flange, which lines up with the center of the hold-down bolts. For a toilet with two bolts on each side, measure to the center of the back bolt.
Don’t forget to share this post 
References and Further Readings :