The UE error code sometimes appears because the washer is too full for the control board to redistribute the load during the rebalance routine. In this case, remove some garments and restart the cycle in Rinse/Spin mode. In the future, loosely place items in the basket; don’t pack down the load and add more garments.
Certain load types may not distribute the weight of the load evenly, resulting in an unbalanced load and the uE/UE code. If this occurs often, it may be necessary to relevel the washer. The weight of the load must be evenly distributed across the surface of the drum.
Thereof, How do I clear the IE code on my LG washing machine?
Turn off the home’s hot and cold water supply taps/valve. Remove the water inlet hoses from the washer. Ensure to have a bucket to drain the remaining water from the hoses. Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.
Also to know is, How do I fix the error code on my LG washer? – Press POWER, and turn the machine OFF.
– Unplug the machine.
– With the power being disabled, press and hold the START/PAUSE button for 5 seconds.
– Plug the washer back in.
– Power the unit back ON.
– Press-in on the door firmly.
– Select any cycle, and press START/PAUSE.
Subsequently, question is, How do I fix the error code on my LG dishwasher? 1 – Push the POWER button and turn the LG dishwasher OFF. 2 – Flip the breaker to the LG dishwasher to OFF and wait 30 seconds. 3 – Flip the breaker to the LG dishwasher back to ON after 30 seconds. 4 – Push the POWER button on the LG dishwasher to turn it back ON.
Also, What does the code UE mean on my LG washer?
unbalanced load condition
How do you fix error code Fe on LG washer?
FE Error Code This may be caused by a faulty inlet valve, and the machine could be filled with water while it is turned off. To fix this: Turn off the water to the unit, perform a drain only or spin only cycle to drain out any excess water, then unplug the unit until repair service is completed.
How do you clear the UE code on a LG washing machine?
– Empty the drum completely.
– Power the unit on.
– Select the RINSE AND SPIN cycle.
– Press start.
What does it mean when your LG Washer says UE?
attempting to balance
What does ie stand for on LG washer?
WATER INLET ERROR
What does Fe mean in LG washing machine?
overfilling
How do I fix the UE on my LG washer?
The UE error code sometimes appears because the washer is too full for the control board to redistribute the load during the rebalance routine. In this case, remove some garments and restart the cycle in Rinse/Spin mode. In the future, loosely place items in the basket; don’t pack down the load and add more garments.
How do I clear the error code on my LG dishwasher?
– Press the POWER button to turn the dishwasher off.
– Turn the circuit breaker to the dishwasher OFF and wait 10 seconds.
– Turn the circuit breaker to the dishwasher back ON.
– Press the POWER button to turn the dishwasher ON and start a new cycle.
How do you fix an unbalanced LG washer?
How do I fix the error on my LG washer?
– Press POWER, and turn the machine OFF.
– Unplug the machine.
– With the power being disabled, press and hold the START/PAUSE button for 5 seconds.
– Plug the washer back in.
– Power the unit back ON.
– Press-in on the door firmly.
– Select any cycle, and press START/PAUSE.
What does IE mean on my LG dishwasher?
An IE error code signifies that the washing machine is filling with water slowly or not at all. This can occur when water supply taps are not fully open or the water pressure to the tap or house is too low. … Other possible causes are kinked, pinched or bent water line hoses, or clogged water inlet filters.
Why does my washing machine keeps unbalancing?
One or more of the suspension rods might be broken. The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake. … If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation.
Why does my LG washer keep saying UE?
The uE/UE code indicates that the washer is attempting to balance the load, which may be the result of the unit not being leveled correctly or the load itself.
Don’t forget to share this post 💖
References and Further Readings :