We recommend using two single curtain rods of 1″ – 2″ in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall).
Thereof, How do you hang up curtains with a valance?
Hang Your Valance Run the valance rod through the top of the valance or use curtain hardware to attach the valance to the rod, depending on which style of valance you’ve chosen. Attach the valance rod to the brackets and adjust the valance so that the fabric is spread out evenly.
Also to know is, Can you hang two curtains one rod? Another smart way to achieve a layered look using a single rod is to use double-sided hooks. Though these are often used in bathrooms for shower curtains, they can be adopted in other rooms as well. Double-sided hooks have two hooks on opposite sides, which can be used to hold two curtain panels at the same time.
Subsequently, question is, Can you put two sets of curtains on one rod? Another smart way to achieve a layered look using a single rod is to use double-sided hooks. Though these are often used in bathrooms for shower curtains, they can be adopted in other rooms as well. Double-sided hooks have two hooks on opposite sides, which can be used to hold two curtain panels at the same time.
Also, How do you hang a valance without a curtain rod?
Hang a valance without a curtain rod –use adhesive Velcro and attach to top of blinds.
How do you hang multiple curtain rods?
Pre-drill holes for the screws with a 1/8″ bit. Insert the screws into the holes, leaving 1/4″ of the screw sticking out. Slide the bracket onto the screws and tighten the screws to secure the bracket to the frame. Level and secure the other bracket: Place the curtain rod into the right bracket.
How do you hang a valance without a rod?
– 1 – Hooks. There are a number of hooks you can use to hang your curtains. …
– 2 – Drawer Pulls. …
– 3 – Rope. …
– 4 – Tree Branches. …
– 5 – Sports Equipment. …
– 6 – Nails. …
– 7 – Copper Pipes. …
– 8 – Upholstery Tacks.
How do you hang a curtain rod with a valance?
Slide the panel rod through the rod pocket on the panels. Hang the panel rod onto the lower rod brackets. Slide the valance rod through the rod pocket on the valance. Hang the valance rod onto the upper rod brackets.
Where do you hang a double curtain rod?
The higher on the wall you place the brackets, the more spacious your room will appear. A general rule of thumb is to install the brackets at least 4 inches above the top of the window frame. They should also be 2-3 inches out from the sides of the window frame so that the rods will hang a little over the edges.
Can Command hooks hold a curtain rod?
Hanging lightweight curtains is as easy as 1-2-3 with Command™ Medium Brushed Nickel Metal Hooks which hold up to 1kg. … Lay the curtain rod across the hooks for a sleek, modern and damage-free window hanging. 4. If not correct, Command™ Hooks are easy to adjust and remove with no lasting damage to the wall.
Can command strips hold up curtains?
Be sure to wait the required hour to allow the adhesive to bond before hanging your curtains. You can see how wonderful hanging curtains with command hooks worked out! We lived in this home for two years and the command hooks held the curtains the entire time with no issue!
How do you hang curtains with a valance?
How do you hang sheers and curtains on one rod?
– Install the curtain rod brackets into studs with the 2 included screws.
– Feed the sheer panel onto the smaller drapery rod. …
– Place rod and sheers onto the back notch of the brackets.
How do you hang up curtains?
How do you hang two curtains together?
– Step 1: Install Hardware. Make sure to select a double curtain rod bracket and the right length rods based on the style you’ve chosen and the length of your window. …
– Step 2: Layer Curtains. Next, assemble your base layer. …
– Step 3: Add Finishing Touches. Attach decorative finials to the ends of your curtain rods.
What can I use instead of a valance?
Tablecloth Linens. A crafty homeowner can whip up a window treatment with any textile—even table linens! Debbie from Debbie Doo’s took pretty cloth napkins and hung them from a rod using curtain clips. The result is an easy and cheerful alternative to a traditional valance.
How do you hang a valance rod?
Hold the valance in one hand and slide the rod through it. The valance should hang flat off the rod. Put the rod onto the brackets and hang the valance. Place the rod on the brackets for the valance.
Don’t forget to share this post 💖
References and Further Readings :
