R, Rh, Rc. In some systems, both the heating and cooling systems use their own signal voltage. In these cases, the signal wire from the heating system will be connected to R or Rh , while the signal wire from the cooling system will be connected to Rc .
If you just have an R wire, it’s responsible for powering your entire HVAC system (through the use of a transformer). If you have both an Rh and an Rc wire, the former powers the heating and the latter powers the cooling (using two separate transformers).
Thereof, Is R and Rh the same on a thermostat?
R , Rh , and Rc are all the same, but not. In general terms, the R terminal is where you connect the signal voltage source. … This allows current to flow from “into” the R terminal and “out of” the appropriate signal terminal ( W , Y , etc.) of the thermostat.
Also to know is, Where do thermostat wires go? Here’s how to wire a thermostat using the color code and, FYI, each terminal’s purpose. Attach the red wire to the R terminal (Call for heating and/or cooling). Attach the green wire to the G terminal (Fan). Attach the white wire to the W terminal (Heat).
Subsequently, question is, Does R wire go to RH or RC? Here are some general guidelines: An R wire can go into a Nest Learning Thermostat’s Rc or Rh connector. The Nest Thermostat E only has an R connector, which is typically where an R wire would go.
Also, Does red wire go to RC or RH?
The RED wire or 24 Vac power lead is connected straight to the RC & 4 terminals. Some thermostat units have a dedicated R terminal and it jumpers to the RC, RH or 4 terminals internally. The W, Y and G terminals should be pretty straight forward on most all types of thermostat’s.
What color wire goes where on a thermostat?
If you only have a single red wire the jumper between Rh and Rc are required for some heating and cooling hybrid systems depending on your thermostat. Yellow/Y is the AC compressor. Green/G runs the fan. Blue or Black/C should be a ground and will be used by both Rh and Rc, and apparently your thermostat.
What happens if you wire a thermostat wrong?
Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself. Dual-fuel systems, a poorly located thermostat, whole-home humidifiers, or incorrect wiring can make the installation of a thermostat a longer, more frustrating, and more complicated …
Where do thermostat wires go on furnace?
Thermostats use 24 volts AC from a transformer to control a furnace. The transformer steps down 120 volts to the 24 volts the thermostat needs, and sends out the 24 volts on two wires. The two 24 volt wires go to the R terminal and C terminal inside the thermostat.
What is an Rh wire?
The Rh wire, another type of red wire, is also responsible for 24-hour volt power from your transformer. The Rh wire connects to your heating system as opposed to your cooling system. … The Rh wire connects to the RH terminal on your thermostat.
What color wires go where on a furnace?
The green wire underneath your thermostat connects to the fan of your furnace or air handler. It terminates at the air handler or furnace. The green wire connects to terminal G on your thermostat.
What do the wires on a thermostat do?
The common wire, sometimes referred to as the c-wire, is what’s responsible for delivering constant power to your thermostat. For programmable thermostats and smart thermostats, c-wires are essential for setting a schedule or having your heat or air conditioner turn on at a desired temperature.
Should RC and RH be connected?
The RC wire (C for Cooling), if connected properly, controls your HVAC cooling. The RH wire (H for Heating) provides power to your HVAC heating. If you are planning to replace your home thermostat, it will be essential that you know which wires to connect to the right terminals in your thermostat.
Is an RC wire the same as AC wire?
The C wire is simply the “common” side of the transformer 24V output (there are two wires coming out of the 24V transformer, “hot” and “common”). Just tap into the “common”. The R (red) wire is really the power source. The C wire closes the circuit and allows continuous flow of 24V energy to power the thermostat.
Do I need an electrician to change a thermostat?
Your best option is to have a C-wire properly installed and run to your new thermostat, which means it will require an electrician’s expertise. Even if you find a DIY article or video online, the risk to your health or home isn’t worth it when dealing electrical wiring.
Do I need a jumper from R to RC?
If you notice a short jumper wire between RH and RC terminal, you will need to leave the jumper installed on the Wiser Air back plate located in the lower right hand corner ( no jumper wire required). In most cases, the heating and cooling system share a single transformer.
What happens if thermostat wires touch?
You Touched R and C wires. This causes the current in the circuit to be high, which may quickly overheat the wires. In a typical household circuit, the circuit would be protected by a circuit breaker (or fuse) which is designed to open (trip) to prevent damage to the wires in this situation.
Are R and RH wires the same?
R , Rh , and Rc are all the same, but not. In general terms, the R terminal is where you connect the signal voltage source. … This allows current to flow from “into” the R terminal and “out of” the appropriate signal terminal ( W , Y , etc.) of the thermostat.
Don’t forget to share this post 💖
References and Further Readings :
