To solve this problem, open the spark plug hole with it facing away from you to drain all the fuel in the tank. Deactivate the choke by pushing in the control then pull the starter cord 6-8 times as you press in the throttle control. Dry off the spark plug and refit it back in place.
If your electric chainsaw won’t start, try examining it for these issues: Not pressing the safety button at the same time as the trigger. Tripped electrical breaker (for corded chainsaws) Frayed or damaged electrical cord (for corded chainsaws)
Thereof, Why will my chainsaw not start?
This sticky fuel can clog up the carburetor and prevent the engine from starting. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor. … The ignition coil sends voltage to the spark plug while the engine is running.
Also to know is, Why won’t my chainsaw start when it’s hot? A dirty or worn-out carburetor can also cause similar problems when hot. You should get your carburetor cleaned and serviced. … You can check for a dirty carburetor by squirting a shot of carb cleaner into the open choke hole just after starting the engine.
Subsequently, question is, Why is my chainsaw getting hot? Even if your saw is in ideal working order, it will overheat if you overwork it. Two ways to do that are to operate it with a dull chain and try to make it do something for which it isn’t designed, such as cut a curve.
Also, Can a chainsaw get too hot?
Yes, chainsaws can overheat but it shouldn’t happen under normal conditions. If the engine is running too hard or if it doesn’t get sufficient ventilation or lubrication it can quickly overheat, which can lead to malfunction.
How do you start a stubborn chainsaw?
Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
How do you fix an electric chainsaw?
What would cause a chainsaw not to start?
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. … This sticky fuel can clog up the carburetor and prevent the engine from starting. If the carburetor is clogged, try cleaning it with carburetor cleaner.
What is the easiest chainsaw to start?
Gas Chainsaws with Electric Starts The mechanism that keeps the saw running—the gas engine—is the same mechanism that gives it the power to start. A special spring is probably the most common easy-start feature you’ll find on chainsaws.
How do you unjam a chainsaw?
Why is my chainsaw getting stuck?
Misjudging where the tension is can cause the chainsaw to become trapped. It is never a good idea to shake your chainsaw while the engine is still running. To do so could cause irreparable damage to your chainsaw and potentially fatal injury to yourself or others.
What makes a chainsaw hard to start?
Old fuel collects moisture, making the fuel difficult to ignite. … It’s possible the engine is flooded with fuel. To clear excess fuel from the carburetor, place the choke lever in the Off position, hold the throttle trigger fully open and pull the starter rope 5 or 6 times. Try to start the chainsaw.
What do you do when your chainsaw gets stuck?
What is the best chainsaw for a homeowner?
– Husqvarna 440E II (16″) 40cc Consumer Gas Chainsaw. …
– Blue Max (20″) 52cc Gas Chain Saw. …
– Blue Max 14″ & 20″ 45cc Combination Gas Chain Saw. …
– Blue Max (18″) 45cc Gas Chain Saw. …
– Husqvarna 130 (16″) 38cc Gas Chain Saw. …
– Husqvarna 135 Mark II (16″) 38cc Gas Chainsaw.
Why does my chainsaw keep getting stuck?
Misjudging where the tension is can cause the chainsaw to become trapped. It is never a good idea to shake your chainsaw while the engine is still running. To do so could cause irreparable damage to your chainsaw and potentially fatal injury to yourself or others.
Can chainsaws overheat?
Chainsaw engines run at high temperatures, usually in the summer, so they can quickly overheat. … If dust, wood chips or other material blocks these systems, the engine will start to overheat. The engine also needs to expel hot air, so the muffler must also be kept clean to keep the engine from overheating.
Can you use starting fluid to start a chainsaw?
Removing the air filter, spraying starting fluid into the carburetor and pulling the starting rope is another quick way to clear out the engine. Starting fluid creates a leaner fuel mixture that ignites more easily, and the operation of the engine clears out the combustion chamber automatically.
Don’t forget to share this post 💖
References and Further Readings :
