“Usually one bag of postcrete per post is enough, however you can use a two bags per post if you feel this is needed. The instructions are on the bag.”Feb 27, 2019
Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.
Thereof, How many bags of concrete do I need for a post hole?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
Also to know is, Is 2 feet deep enough for fence posts? The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
Subsequently, question is, Is 1 ft deep enough for fence post? You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.
Also, How many bags of concrete do I need for a 6×6 fence post?
Re: 6×6 fence posts: how many bags of Quikrete? On a 6′ fence I would go all of 3′ deep. General rule of thumb is 1/3 of post in the ground.
How many bags of concrete do I need for a fence post?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
Should wood fence posts be set in concrete?
First rule, gang: Do not set wooden posts in concrete. Look, no matter what preventative steps you take (and I’ll get to those), eventually wooden posts rot, and eventually you’ll have to set new ones. Not only does burying them in concrete make for more work down the line, it actually can speed up the rotting.
Should fence posts be set in concrete?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
How deep should a 4 foot fence post be?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How deep should posts be for a 6 foot fence?
2 feet
How deep should concrete fence posts be set?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How deep should a 12 foot post be in the ground?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.Nov 4, 1989
How much concrete does it take to fill a 2 foot hole?
Each hole is 2’x2’x2′ which equals 8 cubic feet. You have 2 of these so you need 16 cubic feet of concrete. An 80 lb (36.3 kg) bag of Quikrete yields approximately 0.60 cu ft (17 L). 16 cubic feet / 0.6 cubic feet / per bag = 27 (80#) bags of concrete mix.
How long does Postcrete take to fully set?
5-10 minutes
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How do you calculate concrete for a round hole?
– Choose Round Column (or Round Slab) on the calculator.
– Enter Height 4 ft (or 48 in)
– Enter Diameter 10 in.
– Calculate and the answer is 0.08 cubic yards for one concrete tube.
– Multiply 0.08 x 50 = 4 total cubic yards of concrete for 50 tubes.
How do you cement a 6×6 post?
– Dig the post hole, making it three times the width of the post and at a depth equal to 1/3 to 1⁄2 of the above-ground length of the post, plus 6″ (right). …
– Pour 6″ of gravel or crushed stone into the bottom of the hole. …
– Set the post in the hole.
Don’t forget to share this post 💖
References and Further Readings :
