around 39″
5 feet
Thereof, Can a washing machine drain hose be too long?
Go up too far or along too far and the drain pump will be under too much load. It either won’t manage to pump at all or won’t pump efficiently and it won’t last as long as it should.
Also to know is, How long should a washing machine drain hose be? The washer drain hose is 1¼” O.D. (outside diameter). To be confident that no siphoning of water will take place, the drain plumbing should be a minimum of 30″ high. In order for the drain hose to function properly, the drain must be at least 30″ from the floor and less than 8 feet high.
Subsequently, question is, Do I need a trap on a washing machine drain? When hooking up a new washing machine, some people look for a convenient drain line and simply install a pipe that extends to the washer. … The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
Also, What size should a washing machine drain pipe be?
2-inch
How high can a washing machine pump?
5 feet
Does a washing machine drain into sewer?
Sewer Drain Basics This main sewer drain pipe under the yard is connected to the main drain inside the house, which accepts the wastewater from the individual branch drains serving each plumbing fixture, including sinks, tubs, showers, and toilets, as well as the washing machine.
How long can a washing machine drain hose be?
The answer to this question is complicated by the fact that it is much harder to pump water vertically than horizontally. Washing machine manuals typically specify a minimum height of 39” for the entry of the drain hose into the standpipe or faucet box, and a maximum height of 96” (8 feet).
What size drain do you need for a washing machine?
2-inch
How do I extend my washing machine drain pipe?
Do you need to vent a washing machine drain?
All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home.
Do washing machines drain into septic tank?
Washing Machine Draining into Septic System The volume of water from home washing machine use should not be a problem with a normal septic system in good working order.
How do you unclog a washing machine drain hose?
To unclog a clogged drain, first fill a bucket with boiling water and a pack of baking soda. Remove the drain pipe from your washing machine and slowly pour the water into the drain using a funnel. Wait a few minutes and test if it keeps draining if you pour water into it.
Is my washing machine drain hose too long?
Ideally it should be as short as possible, however on many machines you need the hose to loop up high before going into an open stand pipe or waste disposal so that the machine doesn’t siphon and water from the sink doesn’t want to flow back to the washer.
How long can a drain hose be on a washing machine?
The answer to this question is complicated by the fact that it is much harder to pump water vertically than horizontally. Washing machine manuals typically specify a minimum height of 39” for the entry of the drain hose into the standpipe or faucet box, and a maximum height of 96” (8 feet).
How many loads of laundry a day are safe to do with a septic tank?
Five loads
What is the best drain cleaner for washing machine drain?
– Instant Power Hair and Grease Drain Opener.
– Thrift Drain Cleaner.
– Roebic K-87 Soap, Grease, and Paper Digester.
– FlexiSnake Drain Weasel Sink Snake.
– Omont Drain Snake Clog Remover.
– Vastar Drain Snake Hair Drain Clog Remover.
– FlexiSnake Drain Millipede Hair Clog Tool.
Don’t forget to share this post 
References and Further Readings :
