A hole that is 24 inches wide and 24 inches deep should give your post the necessary stability it needs for everyday use. The bottom 6 inches will be used for something other than concrete.
Thereof, Should I fill my basketball pole with concrete?
As long as you have the post seated deep enough in firm ground with concrete . If you did not pour enough around the pole, putting it in it will not help. I installed the proper amount of concrete in the hole per directions (ended up with 800 lbs concrete in the 36″ deep hole).
Also to know is, How many bags of concrete do I need for a goalrilla? eleven
Subsequently, question is, Is it better to fill a basketball hoop with sand or water? Sand is denser than water, and it weighs more per gallon, so it can help increase stability. But while it may make for a more stable hoop, sand can also make hoops difficult to move. … Many hoop owners choose “play sand,” like the kind used to fill kids’ sandboxes, to fill the base since it can be smoother and more even.
Also, What type of concrete is used for basketball goals?
Quikrete concrete mix
How many bags of sand does it take to fill a basketball base?
10 bags
How do you fill a basketball hoop with sand?
How much concrete do I need for an inground basketball hoop?
10 feet
How do you cement a basketball pole in the ground?
– Step 1: Choose Your Location and Call Before You Dig. …
– Step 2: Dig a Hole. …
– Step 3: Pour the Concrete. …
– Step 4: Raise the Pole. …
– Step 5: Attach the Backboard. …
– Step 6: Install the Rim and Net. …
– Step 7: Finishing Touches.
How do you cement a basketball hoop?
How do you put a basketball post on concrete?
– Step 1: Choose Your Location and Call Before You Dig. …
– Step 2: Dig a Hole. …
– Step 3: Pour the Concrete. …
– Step 4: Raise the Pole. …
– Step 5: Attach the Backboard. …
– Step 6: Install the Rim and Net. …
– Step 7: Finishing Touches.
How long should concrete cure a basketball hoop?
72 hours
How much weight is needed to hold down a basketball hoop?
230 pounds
How do you fill a basketball base with sand?
How many bags of sand do I need to fill a basketball hoop?
10 bags
Can you put a portable basketball hoop in the ground?
Changing a portable basketball hoop to an in-ground system is a weekend project that will likely take about 8 hours of actual work time. … By doing all of the digging and cement work yourself, which is quite possible for many people, you can significantly decrease the cost of this project.
How much sand do you need for a Spalding basketball hoop?
Regulation rim height is 10 feet (3.05 m). Place assembled unit in desired location. Fill base with water (26 gallons/98.4 liters) or sand (approx. 360 lb./163 kg) and press plug (14) in place.
Don’t forget to share this post 
References and Further Readings :