On top of a rough idle, a vehicle with a failing EVAP canister purge valve will display signs of poor engine performance. The engine may feel like its running “weak” and won’t generate sufficient power for acceleration. Accelerating will feel like you’re pressing the pedal down and moving slower.
chey malibu 2009 chevy malibu–with a check engine light on, The P0449 is pointing to a fault in the Evaporative Emission (EVAP) Vent Solenoid. It’s a fairly common fail item. It’s located at the top of the fuel tank. … Check the tubing to/from the Solenoid for any cracks, holes or loose connections.
Thereof, What are the symptoms of a faulty EVAP purge solenoid?
– Rough Idle. …
– Poor Engine Performance. …
– Difficulty Starting. …
– Check Engine Light Comes On. …
– Low Fuel Economy.
Also to know is, How do you know if your EVAP solenoid is bad? – Rough idle. One of the first symptoms that a faulty canister purge valve may produce is a rough idle. …
– Difficulty starting. Another symptom commonly associated with a bad canister purge solenoid is difficult starting. …
– Check Engine Light comes on. A defective canister purge solenoid may also set off the Check Engine Light.
Subsequently, question is, Will a bad EVAP canister cause stalling? If the canister purge solenoid starts to go out, the Check Engine light will come on and your car will not pass an emissions test. In addition, the buildup of fumes inside of the canister can cause your vehicle to stall or misfire. … Stalling vehicle due to a leak in the EVAP system.
Also, How do I fix code p0449?
– Repairing or replacing the wiring harness.
– Replacing the charcoal canister vent valve.
– Repairing faulty electrical connections.
– Replacing faulty ECU.
How do you test a vent valve solenoid?
How do I know if my EVAP canister is bad?
– Check Engine Light is on.
– Raw fuel smell.
– Collapsed or leaking fuel tank.
What are the symptoms of a bad EVAP canister?
– Rough idle. One of the first symptoms that a faulty canister purge valve may produce is a rough idle. …
– Difficulty starting. Another symptom commonly associated with a bad canister purge solenoid is difficult starting. …
– Check Engine Light comes on. A defective canister purge solenoid may also set off the Check Engine Light.
What causes a p0449 code?
Code P0449 indicates that the evaporative control (EVAP) system vent valve solenoid is malfunctioning. This can be caused by either too little or too much electrical resistance or a mechanical problem with the vent valve itself.
How much does it cost to replace a EVAP solenoid?
To have your canister purge valve replaced, you will pay anywhere between $110 and $170. The parts are the expensive component here, as they will run between $75 and $110. The labor, on the other hand, usually only costs about $50, meaning this is a rather quick and straightforward procedure.
How much does it cost to replace an EVAP system?
The fuel evaporative system (EVAP) controls emission by housing vapors from evaporated fuel and sending them back to the fuel tank to be reused. The cost for EVAP system repair ranges between $200 and $560. The labor alone will cost somewhere between $35 and $140, while parts will run somewhere between $150 and $440.
What causes a purge solenoid to go bad?
A leak within the emissions system may be a sign of solenoid failure. The purge control valve reacts to the vapor vacuum within the canister by opening and closing. If the canister, or any of the supply lines, are blocked or have holes, the solenoid cannot function and the purge control valve will remain closed.
Can I drive with a bad purge valve?
While you can still drive your car with a bad purge valve, you will only expose it to further damage not only to the EVAP system, but as well as to the other parts in your vehicle. The more you drive the vehicle with a bad purge valve, the more you will harm other parts. It is necessary to fix the problem eventually.
How do you test an EVAP vent solenoid?
What happens when EVAP canister goes bad?
On top of a rough idle, a vehicle with a failing EVAP canister purge valve will display signs of poor engine performance. The engine may feel like its running “weak” and won’t generate sufficient power for acceleration. Accelerating will feel like you’re pressing the pedal down and moving slower.
How does an EVAP vent solenoid work?
The Vent Solenoid is a normally open valve that is commanded closed to seal the EVAP system and stop air flow into the charcoal canister. The Purge Solenoid is normally closed but is opened by the PCM to allow manifold vacuum in the EVAP system — thus drawing fuel vapours from the EVAP system.
What are the symptoms of a bad EVAP system?
On top of a rough idle, a vehicle with a failing EVAP canister purge valve will display signs of poor engine performance. The engine may feel like its running “weak” and won’t generate sufficient power for acceleration. Accelerating will feel like you’re pressing the pedal down and moving slower.
Don’t forget to share this post 
References and Further Readings :
