Instead of using wood screws or lag bolts as you would use in wood studs, use toggle bolts similar to the Toggler brand that you mentioned. Starting from the center of the stud, make progressively larger holes in the drywall and stud until the toggle bolt will fit through.
Thereof, How much weight can you hang on metal studs?
The axial load, or load weight limit, for metal studs varies widely. An 8-foot, 3-1/2-inch metal stud, for instance, may support over 2,000 pounds, while a 16-foot stud of the same width will support as little as 400 pounds.
Also to know is, How do you mount a TV to metal studs?
Subsequently, question is, Can metal studs be load bearing? Heavier gauge metal studs are used in load bearing walls and structural applications such as exterior walls. Lighter gauge metal studs are used in non-load bearing applications such as some interior walls, half-walls, and partitions. Framing techniques for metal studs are similar to those of wood construction.
Also, Can I hang something without a stud?
Hollow-Wall Anchors: How to Hang Something on the Wall Without a Stud. … Unfortunately, studs are seldom, if ever, positioned exactly where you need them, but that’s okay. In most situations you can use a hollow-wall anchor, which is designed to attach to the wall in the hollow spaces between the studs.
Are metal studs lighter than wood?
Steel studs weigh less than wood. They are lighter by nature, making them easier to store in bulk and less difficult to maintain once they’re installed.
Can I screw into metal studs?
Steel studs are often used in commercial construction as well as in some residential homes. … You won’t know they’re metal when the studs are clad in drywall — until you hit one with a nail or screw when attempting to hang something. Most screws and nails won’t penetrate through steel studs. Drilling a hole is required.
Can metal studs support a TV?
Metal studs are hollow and narrow, so you’ll need hardware that will be strong enough to support the weight of the television and long enough to reach the studs. … Snap toggles are stronger than a toggle bolt or drill toggle and can be used as an anchor for installing a flat screen TV through metal, drywall, and plaster.
How much weight can you hang on drywall?
It’s good to have a selection of these on hand in different sizes. Large versions installed with an angled nail can support up to 20 lbs. For heavier loads (25 pounds to 50 pounds), use a flat-mounted hook and an anchor. Best for: Picture frames (up to 20 pounds) on drywall and plaster.
Can you hang a TV on a wall with metal studs?
Metal studs are hollow and narrow, so you’ll need hardware that will be strong enough to support the weight of the television and long enough to reach the studs. … Snap toggles are stronger than a toggle bolt or drill toggle and can be used as an anchor for installing a flat screen TV through metal, drywall, and plaster.
Are metal studs stronger than wood?
Wooden studs are stronger than metal studs. They can support a lot more weight, being made from heavier material themselves. Wooden studs can be used on load-bearing walls, new cabinets, doorways, and frames to stay sturdy and strong.
How do you anchor into metal studs?
Attach the mounting bracket to the wall using the toggle bolts. Slide the toggle bolt through the hole and pull securely to the metal stud. Screw each bolt so that it’s snug, but not tight to the bracket. Once all the bolts are secure, check to make sure the bracket is level before tightening the bolts fully.
Can you use metal studs in a house?
As the supply of quality lumber diminishes, steel studs will replace their wood stud cousins more and more in home construction. You’ll like steel framing for the many advantages it has over wood: Steel studs are perfectly straight. … Steel studs are light and easy to store, plus they resist fire, insects and rot.
Is it safe to hang a TV on drywall?
Mounting a TV on drywall or plaster without attaching to a stud can be a very safe and reliable solution IF you know the limits of the wall and the toggles. As a professional home theater installer, I’ve used toggles many times and never had a TV fall off the wall.
How much weight can metal studs support?
The axial load, or load weight limit, for metal studs varies widely. An 8-foot, 3-1/2-inch metal stud, for instance, may support over 2,000 pounds, while a 16-foot stud of the same width will support as little as 400 pounds.
How much weight can you hang on drywall without anchors?
5 to 10 pounds
How much weight can you hang on a metal stud wall?
The axial load, or load weight limit, for metal studs varies widely. An 8-foot, 3-1/2-inch metal stud, for instance, may support over 2,000 pounds, while a 16-foot stud of the same width will support as little as 400 pounds.
Don’t forget to share this post 
References and Further Readings :