The two most common types are 40-watt, 4-foot (1.2-meter) lamps, and 75-watt, 8-foot (2.4-meter) lamps. Now, tubular fluorescent technology has improved. New products such as T8 and T5 are much more energy efficiency than T12 (T12 – 57 lumens/watt; T8 – 92 lumens/watt; T5 – 103 lumens/watt).
LED technology does not require a ballast to regulate the amount of energy flowing to the lights. … Additionally, removing the ballast will reduce energy usage and result in even great cost-savings as ballasts continue to draw more power than necessary.
Thereof, Can you put LED bulbs in fluorescent fixtures?
With the advent of LED tubes as a drop-in replacement for fluorescent tubes, the return on investment for LED conversion can be very appealing; the fluorescent fixture can be reused, with only some minor rewiring. However, the differences between the two technologies can result in unexpected side effects.
Also to know is, How do I change my 8 foot fluorescent to LED?
Subsequently, question is, Do they make 8 foot LED lights? Buy 8-Foot LED Lights Lighting tubes that are 8 feet in length are often found in store displays, hospitals, warehouses, hospitality businesses, labs, utility rooms and offices. Today’s businesses are moving away from the harsh, wasteful fluorescent tubes in favor of 8-foot LED lights.
Also, How many lumens does a 8 foot fluorescent bulb produce?
2500 lumens
Can you replace 4 foot fluorescent bulb with LED?
There is a wide variety of methods for converting to LED tubes. The simplest is to completely replace old fluorescent fixtures with brand-new LED fixtures. However, LED fixtures to replace four-bulb (8-foot-long) fluorescent fixtures (common in farm buildings) can set you back $100 or more per unit.
Do I still need a starter with an LED tube?
Starters and LED tubes If a starter is used in the current fixture with a conventional fluorescent tube then the starter must be replaced with a LED starter. Our LED tubes for fixtures with a conventional ballast are supplied standard with a LED starter.
How much does it cost to convert fluorescent to LED?
Replacing incandescent and compact fluorescent lamp (CFL) bulbs with LED bulbs will cost about $6 – $9 for a 10-Watt LED. Therefore, if you change 24 bulbs, it will cost $144 – $216 to replace those all at once. 10W LED lamps are the standard bulb replacement for 60-100W incandescent lamps.
How many watts does a fluorescent shop light use?
Technology Ballast Factor Operational Wattage
—————————— ————– ——————-
34 Watt T12 Fluorescent Tubes 0.88 43 Watts
16 Watt T8 Equivalent LED Tube 1 16 Watts
Do fluorescent lights use a lot of electricity?
Fluorescent lamps, including compact fluorescent lights (CFLs), use about 75 percent less energy than incandescent bulbs and last six to 15 times as long, according to the U.S. Department of Energy (DOE). … Energy is power over time. If you operate for 1000 hours, then, you consumes 40 kWh.
How many lumens does a 8 foot fluorescent bulb have?
For example, at a CCT of 3500 K, there are five RE70 models available with a rated initial light output of 2800 lumens and eight models available with a rated initial light output of 2850 lumens. Figure 1 shows that RE70 models tend to have lower light output than RE80 models.
What uses more electricity fluorescent or LED?
LEDs work about 90 percent more efficiently than incandescent bulbs. CFLs cut energy use by about 70 percent when compared to incandescent bulbs. LED light bulbs use roughly half the wattage of fluorescent lighting, about 6 watts of power versus 14 watts of power for a CFL light bulb.
How much does it cost to leave a fluorescent light on?
After 1,000 hours in use, one bulb costs about $4.73 to operate. 15W CFL: At about 75 percent more efficient than incandescent bulbs, one compact fluorescent light only costs $1.65 to operate for 1,000 hours.
Is it cheaper to leave lights on all the time?
Sometimes it can actually be cheaper to leave a light on rather than turn it off. It all depends, Energy.gov says, on the light bulb. … Turning them off will also help cool a room in summer, which could potentially affect other energy costs as well, such as air conditioning.
How do you change a fluorescent light to LED?
How do I convert a 4 foot fluorescent bulb to LED?
Are led shop lights better than fluorescent?
LED tube bulbs are slightly more expensive than their fluorescent counterparts, but once you factor in the long life and reduced energy usage of the life of the bulb, the minimal difference actually disappears. Added to this, you’ll have the advantage of brighter, instant-on lighting with a very even spread.
Don’t forget to share this post 
References and Further Readings :